Hardware

S-HCN1024 Nut - Cage, Zinc, 10-24, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-24 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.95
S-HNFW-M3-X Washer - Flat, M3, Nylon, for Front Panels
Colors Available:
High quality nylon M3 flat washers. These durable washers fit perfectly on M3 threaded screws. The small outside diameter provides a clean look beneath the head of the screw. These are great mounting washers for preventing rack rash on front panels like Eurorack synths or any other use where the surface beneath the screw requires protection.
$0.99
package of 10
W-SC-NUT38-K Nut - Switchcraft, Knurled Nut, 3/8”-32
Genuine Switchcraft ⅜” knurled nut commonly used on ¼” jacks. This nickel plated knurled nut has a ⅜”-32 threading and offers a clean look on builds using these nuts. The ⅜”-32 threading fits other hardware with matching threading such as CTS potentiometers.
$0.99
S-SJ-3201 Hedlock Fastener - 4 Sets of 2 Clips
These super sturdy fasteners are great for speaker covers or helping prevent earthquake damage. 4 sets of 2 clips (package of 8).
$1.00
package of 8
S-H180X PC Lock-In Support - Nylon, sturdy for mounting
Nylon lock-in supports for mounting printed circuit boards.
  • Locks onto .062 (1.57) thick PC board
  • Board is positively locked until manually released
  • Board is easily releasable for repairs or upgrades
  • Sturdy support due to high contact area with chassis

Designed for 0.156” PCB mounting hole diameter, 0.187” chassis mounting hole diameter, 0.062” PCB thickness, 0.062” chassis thickness.
Starting at $1.05
package of 5
S-HSM6-1X30-SS Screw - M6x1.0 x 30mm, Phillips, Pan Head, Machine, Stainless Steel
Stainless steel M6 screws that are nearly identical to the chassis mounting screws used on many Marshall amps. These 30mm long pan head screws pair with the oversized washers S-HOW-M6 to attach amplifier chassis to head cabinets. Fits any Marshall head that uses M6 screws.
$1.09
S-HBNX Nut - Hex, Brass, Imperial Thread
Imperial threaded hex nuts made of solid brass. These brass hex nuts visually match the nuts found in vintage Marshall amplifiers. They are a great choice for restoration or replica builds. These will also work well in many other types of projects. Pairs with S-HSB4-X, S-HSB6-X, and S-HSB8-12 screws. S-HLWX-B lock washers and S-HBWX flat washers are also available.
Starting at $1.09
package of 5
S-HELWX Washer - External Tooth Lock, Stainless Steel
Stainless steel lock washers that use external teeth for locking and tension. The external teeth dig into the screw head or nut and the joint. These washers provide greater vibration resistance than split lock washers. Steel lock washers like these can be found in vintage Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.
Starting at $1.09
package of 10
S-HTNX Nut - T-Nut, Zinc, for fastening metal to wood or plastic
Zinc t-nut. Used for fastening metal to products made of wood, particle board or plastic. Low carbon steel. Package of 5. Multiple sizes available.
Starting at $1.15
package of 5
S-HS1032-X Screw - 10-32, Phillips, Pan Head, Machine, Zinc, fine thread
Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $1.15
package of 5
S-HBR-18D-X Blind Rivet - Dome Head, Steel, ⅛ in. diameter
Steel shank / steel mandrel blind rivets with a ⅛” diameter. Blind rivets, also referred to as pop rivets, can be used to join or fasten two components without requiring access to the backside of the panel or chassis. The installation is quick and results in a joint that can be stronger and tighter than a screw. These rivets are useful for securing tube sockets or other hardware such as battery holders on stompboxes.
Starting at $1.15
package of 12
S-HS832-X Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$1.15
package of 5
P-H54-DRESS-WIDE Nut - Wide Dress Nut, Threaded Through, For Mini Toggle Switches
Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$1.15
S-ASP4-X Spacers - Round, Aluminum, fits 4-40, 3/16” OD
Round spacers made of aluminum that fit 4-40 or M3 threaded screws. These non-threaded aluminum spacers visually match the PCB and turret board standoffs found in vintage Marshall amplifiers. They are a great choice for restoration or replica builds. The outer diameter is 3/16”. These will also work well in many other types of projects. Pairs with S-HSB4-114 screws, S-HBNX brass nuts and S-HLWX-B lock washers. S-HBWX flat washers are also available.
$1.19
S-HKEP-X Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Popular low-cost lock nut (also known as a Keps nut, k-lock, or washer nut) for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
Starting at $1.20
package of 10
S-HSW Washer - Fiber Shoulder, 0.625" outer diameter
Fiber Shoulder Washer Overall Outer Diameter = 0.625" Center Hole Diameter = 0.385" sold in packages of 5
$1.20
package of 5
S-H409X Wire Nut - 18-22AWG, 300V, Rated for 105°C
300V wire nuts for use with 18 gauge through 22 gauge wires. These wire nuts are great for use on appliances, televisions, stereos, antennas, or for any small wiring application. Rated for up to 105°C.
$1.23
Save 15%
Originally: $1.45
package of 20
S-H8FW-X Finishing Washer - Blackface / Silverface, Plated Metal
Colors Available:
Plated metal finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found in many vintage blackface and silverface amplifiers and cabinets. This style is most typically used on front grill and baffle board mounting screws in these amps and cabinets. Fits with #8 countersunk screws.
Starting at $1.25
package of 10
P-H54-WASHER-LOCK Washer - Internal Tooth Lock, ¼”, For Mini Toggle Switches
Spring steel tooth-lock washer. Uses internal teeth for locking and tension. The 0.25 inch size fits Carling mini toggle switches along with any other ¼” bushing item.
$1.25
package of 5
P-H54-DRESS-THRU Nut - Dress Nut, Threaded Through, For Mini Toggle Switches
Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$1.25
R-VM-NUT-2 Nut - M8x0.75 hex, for potentiometers / switches / jacks
M8 x 0.75 threaded hex nut. For use on potentiometers, switches, and jacks.
$1.25
package of 5
S-HPOH4-12 Screw - #4 x ½”, Phillips, Oval Head, Sheet Metal, Nickel-plated
#4 x ½” Phillips drive sheet metal screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® pickguards, tremolo covers, and some bridge covers.
$1.25
package of 5
R-VC-FLATWASHER Washer - CTS, Flat, for Potentiometers
Flat washer for 3/8" bushing. Perfect fit for CTS potentiometers. Package of 10.
$1.25
package of 10
S-HPOH6-X Screw - #6, Phillips, Oval Head, Wood, Nickel-plated
#6 Phillips drive wood screws made of nickel plated steel. This style of oval head screw is commonly used on Fender® tweed, blackface, and silverface combos and heads to secure the back panel. They are also the same type used for securing strap buttons as well as for mounting the bridge plate on Telecaster® guitars.
Starting at $1.25
package of 4
Don't see what you're looking for? Send us your product suggestions!