Hardware

S-HHN-X-SS Nut - Hex, Stainless Steel, Imperial Thread
Imperial threaded hex nuts made of 18-8 stainless steel. Hex nuts like these can be found in countless pieces of equipment such as Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.
$0.89
package of 5
S-HCN1032 Nut - Cage, Zinc, 10-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.85
W-SC-NUT38-K Nut - Switchcraft, Knurled Nut, 3/8”-32
Genuine Switchcraft ⅜” knurled nut commonly used on ¼” jacks. This nickel plated knurled nut has a ⅜”-32 threading and offers a clean look on builds using these nuts. The ⅜”-32 threading fits other hardware with matching threading such as CTS potentiometers.
$0.99
R-VM-NUT-2 Nut - M8x0.75 hex, for potentiometers / switches / jacks
M8 x 0.75 threaded hex nut. For use on potentiometers, switches, and jacks.
$1.25
package of 5
S-HRVNT Nut - Fender, Hex Type, for Potentiometers
Hex nut for Fender® potentiometers. Package of 12.
$4.45
package of 12
R-VKG-NUT Nut - for Marshall, Hex Type, M9, for Potentiometers
Replacement nut for Marshall snap in style pots with M9 bushing.
$0.75
package of 5
S-HCN832 Nut - Cage, Zinc, 8-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 8-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
$0.75
W-SC-W09 Nut - Switchcraft, Knurl Nut for Switches
Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated) Outside Diameter:5/8" Inside diameter threading:15/32" Width: 3/32"
$1.79
P-GTNN22 Nut - Black Bone, Pre-slotted, Gibson Style
Pre-slotted black bone nuts for Gibson necks with a 12” radius. A 12” fingerboard is the common radius used on most Gibson guitars. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.
  • Height - 9.3 mm
  • Width - 43.4 mm
  • Thickness - 4.8 mm
  • Radius - 12 in.
$7.85
S-HCN1024 Nut - Cage, Zinc, 10-24, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-24 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.95
S-H510 Nut - Fender®, Hex, for Rean Jacks
Hex nuts for Rean jacks. Package of 12 Genuine Fender replacement jack nuts: 7/16-20 x 1/8 nickel-plated Used with many Fender amplifier jacks
$5.25
package of 12
S-H409X Wire Nut - 18-22AWG, 300V, Rated for 105°C
300V wire nuts for use with 18 gauge through 22 gauge wires. These wire nuts are great for use on appliances, televisions, stereos, antennas, or for any small wiring application. Rated for up to 105°C.
$1.23
Save 15%
Originally: $1.45
package of 20
S-H9NT-M Nut - Cliff, Hex, Plated Steel
Hexagonal, plated steel nut for Cliff UK jacks. This nut fits Cliff jacks with 7/16″ UNF, 20 TPI threading.
$1.75
P-GTNN21 Nut - Black Bone, Pre-slotted, Strat and Tele style, 9.5" Radius
Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 9.5” radius. A 9.5” fingerboard has been the standard Fender® neck radius since the 1980s. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.
  • Height - 5.4 mm
  • Width - 42.86 mm
  • Thickness - 3.3 mm
  • Radius - 9.5 in.

For a version of this nut with a 7.25” radius, see P-GTNN20.
$7.85
P-H54-NUT-HEX Nut - Hex Nut, For Mini Toggle Switches
Hex nuts for use with mini toggle switches. These nickel plated dress nuts work on any 1/4-40 UNS threaded bushing. These are the same as the stock nuts included with Carling mini toggle switches.
$1.95
package of 5
P-GTNN20 Nut - Black Bone, Pre-slotted, Strat and Tele style, 7.25" Radius
Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 7.25” radius. A 7.25” fingerboard radius originated in the early 1950s and was used for most Fender® electric instruments until the 1980s.
  • Height - 5.4 mm
  • Width - 42.86 mm
  • Thickness - 3.3 mm
  • Radius - 7.25 in.

For a version of this nut with a 9.5” radius, see P-GTNN21.
$7.85
R-VNUT-38-M Nut & Washer - Panel, for ⅜" Potentiometers and Jacks
Replacement nut and washer for pots and jacks that feature a ⅜" bushing with 3/8-32 threading. Sold in packs containing 100 nuts and 100 washers.
$25.00
package of 100
Don't see what you're looking for? Send us your product suggestions!