Hardware

S-H100 Screw - 1", Flat top Phillips, Stainless Steel
Package of 4
1" stainless steel Phillips head, flat top screw.
$1.26
Save 10%
Originally: $1.40
S-HS1032-1F-SET Hardware - Fender, Screws & T-Nuts for Handle
Package of 5
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
$2.70
Save 10%
Originally: $3.00
S-HRVLW Washer - Fender®, Lock Type, for Potentiometers
Package of 12
Lock washer for Fender® potentiometers. Package of 12.
$3.83
Save 10%
Originally: $4.25
S-HCN1032 Nut - Cage, Zinc, 10-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.59
Save 9%
Originally: $0.65
S-H111 Nut - Hex, for Carling switches, ~\frac{15}{32}~"
Hex nut for Carling switches, 15/32". Sold individually.
$0.32
Save 9%
Originally: $0.35
P-H249 Clip Nut - 8/32
Package of 4
Clip nut for 8/32" thread. For use with P-H248 Machine screws
$0.72
Save 10%
Originally: $0.80
S-HM301 Switch - Marshall, Toggle, DPST, On-Off, Chrome Tip
Marshall toggle switch, latching 2 position DPST, On-Off. 15A 250VAC rating. Used for Mains and Standby switch in Marshall 1959SLP, 1987X, 2245 and others. See Marshall nut S-HM300N if necessary. Nut sold separately. Note: On-Off switches may sometimes be referred to as On-None-Off.
$14.36
Save 10%
Originally: $15.95
S-HCN1024 Nut - Cage, Zinc, 10-24, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-24 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.54
Save 10%
Originally: $0.60
S-HCN832 Nut - Cage, Zinc, 8-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 8-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
$0.54
Save 10%
Originally: $0.60
W-SC-W09 Nut - Switchcraft, Knurl Nut for Switches
Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated)
Outside Diameter:5/8"
Inside diameter threading:15/32"
Width: 3/32"
$1.35
Save 10%
Originally: $1.50
P-H264 Screw - #8-32 x 3.25", for Chassis Straps
#8-32 x 3 ¼" chassis strap screw. Single piece.
$1.80
Save 10%
Originally: $2.00
S-H101 Screw - #6 x ¾", Pan Head, Stainless Steel
Package of 12
Stainless steel pan head Phillips self-tapping screws. #6 X ¾" length. Good for use with #'s 3,4 and 5.
$2.16
Save 10%
Originally: $2.40
S-H102 Screw - #6 x ¾", Flat Head, Stainless Steel
Package of 8
Stainless steel flat head Phillips self-tapping screws. #6 x 3/4" length. Good for use with P-H266 & P-H267 & P-H1087N.
$1.80
Save 10%
Originally: $2.00
S-H103 Screw - #4 x ½", Oval Head, Sheet Metal, Black Oxide
Package of 25
Black screws for attaching logos and other lightweight items. #4 x 1/2" sheet metal/wood screws, oval head, black oxide finish. Package of 25.
$2.70
Save 10%
Originally: $3.00
S-H104 Screw - #2 x ⅜, Phillips, Oval Head, SMS, Zinc
Package of 25
#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.
$3.60
Save 10%
Originally: $4.00
S-H105 Screw - 1", Phillips, Oval Head, Matching T-Nut
Package of 4
1" Oval head, Phillips screw with matching t-nut. (package of 4)
$1.26
Save 10%
Originally: $1.40
S-HS1032-1F Screw - 10-32, Phillips, Flat Head, Machine, stainless steel
Package of 5
Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.
$1.35
Save 10%
Originally: $1.50
S-HS632-X Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.36
Save 10%
Originally: $0.40
Don't see what you're looking for? Send us your product suggestions!