Hardware

Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10

Original Fender speaker mounting stud/nut set. These speaker mounting studs were used on countless amps of the '50s, '60s, '70s, and beyond. The reverse thread section screws into the baffle wood and the machine screw section holds the speaker in place using the included keps nuts.

• Used on early ’50s and ’60s vintage amplifiers
• Fits most vintage and modern amplifiers
• 1” of 8-32 machine head thread
• ¼” of reverse wood thread
• 1-½” overall length
• 8-32 keps nuts included

Fender part number: 099-2094-000

#6-32 threading, package of 4. Comes in 1/2" or 3/4" length. For female standoffs, see S-H172X

#6-32 threading, package of 4. Comes in 1/2" or 3/4". For male to female standoffs, see S-H170X

#4 finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance.

#6 steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. Made of 18-8 stainless steel.

Plated metal finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found in many vintage blackface and silverface amplifiers and cabinets. This style is most typically used on front grill and baffle board mounting screws in these amps and cabinets. Fits with #8 countersunk screws.

Imperial threaded hex nuts made of solid brass. These brass hex nuts visually match the nuts found in vintage Marshall amplifiers. They are a great choice for restoration or replica builds. These will also work well in many other types of projects. Pairs with S-HSB4-X, S-HSB6-X, and S-HSB8-12 screws. S-HLWX-B lock washers and S-HBWX flat washers are also available.

18-8 stainless steel sheet metal screws with blunt tips. These pan head #6 screws have a length of 5/16” and are commonly used to secure 9-pin sockets and other hardware to the chassis of blackface and silverface amps. These are also used in some tweed amps for securing the fiberboard and other hardware to the chassis. For the larger #8 blunt tip machine screws found in vintage Fender® amps, see S-HBS8-38.

18-8 stainless steel sheet metal screws with blunt tips. These pan head #8 screws have a length of 3/8” and are commonly used to secure the fiberboard, capacitor pan, and other hardware to the chassis of blackface and silverface amps. For the smaller #6 blunt tip machine screws found in vintage Fender® amps, see S-HBS6-516.

Brass general purpose flat washers. Designed for general purpose mechanical and structural use. Brass washers are corrosion resistant in wet environments, nonmagnetic, and electrically conductive. Pairs nicely with S-HSB4-X, S-HSB6-X, and S-HSB8-12 screws and S-HBNX nuts.

Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.

• 10-24 Threading
• Panel Range .064-.105
• Zinc Finish
• Sold Individually

Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.

• 10-32 Threading
• Panel Range .064-.105
• Zinc Finish
• Sold Individually

Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.

• 8-32 Threading
• Panel Range .064-.105
• Zinc Finish

Stainless steel lock washers that use external teeth for locking and tension. The external teeth dig into the screw head or nut and the joint. These washers provide greater vibration resistance than split lock washers. Steel lock washers like these can be found in vintage Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.

18-8 stainless steel sheet metal screws. These flat head #10 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for AC power cables used in vintage Fender® blackface and silverface combo amps. For the smaller #8 screws often used with reverb cables, see S-HFS8-34.

18-8 stainless steel sheet metal screws. These flat head #8 screws have a length of ¾” and are commonly used to secure cable clamps directly to the cabinet for RCA reverb tank cables used in vintage Fender® blackface and silverface combo amps. For the larger #10 screws often used with power cables, see S-HFS10-34.

Imperial threaded hex nuts made of 18-8 stainless steel. Hex nuts like these can be found in countless pieces of equipment such as Fender® blackface, silverface, and tweed amplifiers for securing hardware, transformers, and speakers.

Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.

Steel lock washers that use both internal and external teeth for locking and tension. The teeth dig into the screw head or nut and the joint. These washers provide greater vibration resistance than split lock washers. Steel lock washers like these can be found in vintage Fender® blackface and silverface amplifiers for securing speakers to the cabinet. These washers have a zinc finish.

Popular low-cost lock nut (also known as a Keps nut, k-lock, or washer nut) for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.

Flat washer/locking ring. Fits switches that mount to 1/2" chassis holes. A 0.110" length guide tab ensures a locking fit (locking hole is 0.376" from chassis hole center).

Spring steel tooth-lock washer. Uses internal teeth for locking and tension.

Black oxide finished steel lock washers that use internal teeth for locking and tension. The internal teeth dig into the screw head or nut while the smooth outside edge won't snag objects. These washers provide greater vibration resistance than split lock washers. Black oxide lock washers like these can be found in vintage Marshall amplifiers. Pairs nicely with S-HSB4-X, S-HSB6-X, and S-HSB8-12 screws and S-HBNX nuts.