Hardware

P-STTR-15 Machine Pin Socket - Preci-Dip, Break Away, 1 Row, 15 Position
High quality single row machine pin sockets made by Preci-Dip. These sockets are the break-away type and can easily snap into smaller sizes such as 5 separate transistor sockets.
$1.65
S-HNUT-38X Finishing Nut - For ⅜” Jacks and Pots, ⅜”-32 UNEF-2A
Package of 5
Colors Available:
High quality plated ⅜” nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The ⅜”-32 UNEF-2A threading fits many ⅜” bushing parts such as Switchcraft ¼” jacks and CTS pots.
Starting at $0.64
R-VC-NUT Nut - CTS, 3/8-32, Nickel, for 450 Series Potentiometers
Replacement nut for CTS 450 series potentiometers and others.
  • 3/8-32 threading
  • Sold individually
$0.55
S-H105 Screw - 1", Phillips, Oval Head, Matching T-Nut
Package of 4
1" Oval head, Phillips screw with matching t-nut. (package of 4)
$1.99
S-HS832-X Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$1.15
P-H54-DRESS-THRU Nut - Dress Nut, Threaded Through, For Mini Toggle Switches
Threaded through dress nuts for use with mini toggle switches. Unlike the other versions of this dress nut, this nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$1.25
R-VNUT-M7 Nut & Washer - for M7x0.75 Potentiometers
Replacement nut for Marshall style pots with 7mm bushing. Sold individually
$0.25
P-1210 Contact Pin - Nickel Plated Brass, Seamless, 0.566" Height
0.125" diameter nickel plated brass contact pin. Fits .062" and .093" boards. Height is .566" when mounted. In addition to turret board use, these pin connectors are often found on printed circuit boards. They are referred to as through hole terminal pins, header pins, or crimp contact pins.
$0.15
S-H9FER Ferrule - for Cliff UK Jacks, Chrome
Ferrule for internal thread jacks, chrome (3/8-20).
$0.66
P-H52-WASHER-LOCK Lock Washer - Carling, Internal Tooth, for Toggle and Foot Switches
Package of 5
Nickel-plated internal tooth lock washers from Carling. These fit 15/32 and M12 bushing which are commonly used on full sized toggle switches and footswitches.
$2.69
W-BNUTL-BK Dress Nut - Befaco, Bananuts, for M7 Pots
Larger threaded black Bananuts for mounting potentiometers or other hardware with M7 bushings. These nuts look great beneath smaller sized knobs.
$0.79
S-H9NT-W Nut - Cliff, Hex, for ¼" white Jacks
Hex nut for white Cliff Jacks, threading: 7/16-20. Also used on the footswitch jack in some Marshall amps.
$0.91
S-H9WSH-GND Lock Washer - Grounding, for S4 jack socket
EMI / RFI screen (grounding washer) for S2 and S4 Cliff jack sockets. This lock washer is added to S2/S4 Cliff jacks to provide a chassis/shield connection for the connection. Jacks sold separately.
$0.35
On Backorder
S-H170X Standoff - #6-32, Male-Female, Aluminum
Package of 4
#6-32 threading, package of 4. Comes in 1/2" or 3/4" length. For female standoffs, see S-H172X
Starting at $2.95
P-H186 Washer - Rubber, Chassis Mount, ⅞" Diameter
Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. Allows proper dial centering in cabinet opening. Overall dimensions 0.875" dia. x .233" thick.
$0.75
S-HCN1032 Nut - Cage, Zinc, 10-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.85
S-HS-M3-X Screw - M3, Phillips, Pan Head, Machine
Package of 5
Phillips panhead machine screw, M3 metric, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
See S-HS-M3-6-X for colored 6mm M3 screws.
Starting at $0.75
S-H137 Solder Tag - M3.5 or #6 Mounting Hole
Package of 12
Flat-washer style solder tag for use with M3.5 or #6 screws. This small solder tag is an easy way to add a wire such as a chassis ground connection to a build. This solder tag is also a great match for vintage style builds such as Fuzz Face style effects pedals.
  • Contact Material: Brass
  • Contact Plating: Tin
  • Inner Diameter: 3.5± 0.2 mm
  • Outer Diameter: Ø6.3 ± 0.2 mm
  • Length: 12.7 ± 0.5 mm
  • Thickness: 0.35 mm
$1.25
P-H54-DRESS-WIDE Nut - Wide Dress Nut, Threaded Through, For Mini Toggle Switches
Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.
$1.15
S-HHNX Nut - Hex finished, fine thread, zinc
Package of 5
Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
Starting at $0.30
P-H200X Washer - 0.25" Inside Diameter, Felt
Package of 5
Premium quality wool felt washers. Medium brown in color, these washers will resist wear and hold their shape over time. Center holes already punched. ¼" inside diameter. Listed diameter is outside diameter. Washer is 1/16" thick.
Starting at $1.99
P-GTS-100X Screw - phillips, for pickguards / control plates
Package of 100
Colors Available:
Pick guard screws, phillips, ovalhead. Great for mounting countersunk pickguards, control plates, etc.
  • 7/16” threaded portion
  • Available in Black, Gold, Nickel, and Chrome plating
  • Package of 100
Starting at $8.39
P-H1590MS-X Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Package of 4
Colors Available:
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
Starting at $1.35
S-H8FW-X Finishing Washer - Blackface / Silverface, Plated Metal
Package of 10
Colors Available:
Plated metal finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
Starting at $1.25
Don't see what you're looking for? Send us your product suggestions!