Hardware

S-HKEP-X Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Package of 10
Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
$1.00
P-H264-NUT Nut - 8-32, Keps with external tooth, zinc
Package of 10
Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
$1.00
R-VC-FLATWASHER Washer - CTS, Flat, for Potentiometers
Package of 10
Flat washer for 3/8" bushing. Perfect fit for CTS potentiometers. Package of 10.
$1.25
P-H200X Washer - 0.25" Inside Diameter, Felt
Package of 5
Premium quality wool felt washers. Medium brown in color, these washers will resist wear and hold their shape over time. Center holes already punched. ¼" inside diameter. Listed diameter is outside diameter. Washer is 1/16" thick.
Starting at $1.95
S-H8FW Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10
Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
$1.00
S-HLWX Washer - Internal Tooth Lock, spring steel
Package of 5
Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
Starting at $0.45
S-HFW Washer - Flat Fiber
Package of 5
Fiber Flat Washer Outer Diameter = 0.625" Inner Diameter = 0.385" sold in packages of 5
$0.30
Save 33%
Originally: $0.45
S-HSW Washer - Fiber Shoulder
Package of 5
Fiber Shoulder Washer Overall Outer Diameter = 0.625" Center Hole Diameter = 0.385" sold in packages of 5
$1.00
S-H514 Nut & Washer - Panel, for Fender / Marshall Jacks
Package of 5
M12 x1.0 thread. Package of 5.
$1.50
S-HTNX Nut - T-Nut, Zinc, for fastening metal to wood or plastic
Package of 5
Zinc t-nut. Used for fastening metal to products made of wood, particle board or plastic. Low carbon steel. Package of 5. Multiple sizes available.
Starting at $1.00
R-VM-NUT-2 Nut - M8x0.75 hex, for potentiometers / switches / jacks
Package of 5
M8 x 0.75 threaded hex nut. For use on potentiometers, switches, and jacks.
$1.25
S-HWX Washer - Type A Narrow, Flat, steel
Package of 5
Steel, type A narrow. SAE washers have a tighter fit on the bolt and a smaller outside diameter. Designed for general purpose mechanical and structural use.
Starting at $0.45
R-VNUT-38 Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
$0.70
S-H401 Washer - C, Assortment
Package of 25
Oneida brand. Contains 25 of the most popular sizes generally used in Record Changers, Tape Recorders, etc. Use on Turn Tables, Drive Wheels, Idler Wheels, etc.
$0.49
Save 11%
Originally: $0.55
S-HLW-CARLING Locking Washer - Carling
Package of 5
Flat washer/locking ring. Fits switches that mount to 1/2" chassis holes. A 0.110" length guide tab ensures a locking fit (locking hole is 0.376" from chassis hole center).
$1.50
S-H9NT Nut - Cliff, Hex, for Jacks
Nut - Hex, for Cliff UK Jacks S-H902, S-H903, S-H904, & S-H905
$0.50
W-SC-S1029 Washer - Switchcraft, S1029, shoulder for insulating panels
Switchcraft shoulder washer for 3/8” bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1028. Minimum chassis hole diameter of 0.44” required to accommodate the shoulder.
$0.60
S-HHNX Nut - Hex finished, fine thread, zinc
Package of 5
Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
$0.30
S-HM300N Nut - Marshall, for S-HM301 Toggle Switch, Chrome
Chrome slotted nut for part S-HM301 toggle switch.
  • Thread size = 15/32 - 32 thread pitch
$3.50
W-SC-S1028 Washer - Switchcraft, S1028, flat for insulating panels
Switchcraft (brown) rigid plastic washer for 3/8” bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1029.
$0.40
P-H183 Washer - Rubber, Chassis Mount, 1-⅛" x ¼" Thick
Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. 1/4 inner dia. Allows proper dial centering in cabinet opening. Overall dimensions 1 1/8" dia. x 1/4" thick.
$1.40
S-H510 Nut - Fender®, Hex, for Rean Jacks
Package of 12
Hex nuts for Rean jacks. Package of 12 Genuine Fender replacement jack nuts: 7/16-20 x 1/8 nickel-plated Used with many Fender amplifier jacks
$4.60
S-HRVLW Washer - Fender®, Lock Type, for Potentiometers
Package of 12
Lock washer for Fender® pots. Package of 12.
$4.25
S-HCN1032 Nut - Cage, Zinc, 10-32, Electroplate Panel Range .064-.105
Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
  • 10-32 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually
$0.65
Don't see what you're looking for? Send us your product suggestions!