Solder Lug - #6 or #8 Hole, Locking
Package of 10Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
Starting at $1.50
Nut - 8-32, Keps with external tooth, zinc
Package of 10Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
Washer - 0.25" Inside Diameter, Felt
Package of 5Premium quality wool felt washers. Medium brown in color, these washers will resist wear and hold their shape over time. Center holes already punched. ¼" inside diameter. Listed diameter is outside diameter. Washer is 1/16" thick.
Starting at $1.95
Nut - T-Nut, Zinc, for fastening metal to wood or plastic
Package of 5Zinc t-nut. Used for fastening metal to products made of wood, particle board or plastic. Low carbon steel. Package of 5. Multiple sizes available.
Starting at $1.00
Washer - CTS, Flat, for Potentiometers
Package of 10Flat washer for 3/8" bushing. Perfect fit for CTS potentiometers. Package of 10.
Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Package of 10Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
Washer - Internal Tooth Lock, spring steel
Package of 5Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
Starting at $0.45
Nut & Washer - Panel, for Fender / Marshall Jacks
Package of 5M12 x1.0 thread. Package of 5.
Nut - Hex finished, fine thread, zinc
Package of 5Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
Washer - Fiber Shoulder
Package of 5Fiber Shoulder Washer Overall Outer Diameter = 0.625" Center Hole Diameter = 0.385" sold in packages of 5
Finishing Washer - Blackface / Silverface, Nickel-plated Steel
Package of 10Nickel-plated steel finishing washers. Designed for accommodating the heads of countersunk screws. It provides additional bearing area on the material being fastened and can be used to give a neat, finished appearance. These high quality washers closely resemble the washers found on many vintage blackface and silverface amplifiers. Fits with #8 countersunk screws.
Washer - Flat Fiber
Package of 5Fiber Flat Washer Outer Diameter = 0.625" Inner Diameter = 0.385" sold in packages of 5
Nut - Wire nut, Small
Package of 12Small wire nuts, for use on appliances, televisions, stereos, antennas, or for any small wiring application.
Nut - Cliff, Hex, for Jacks
Nut - Hex, for Cliff UK Jacks S-H902, S-H903, S-H904, & S-H905
Nut - M8x0.75 hex, for potentiometers / switches / jacks
Package of 5M8 x 0.75 threaded hex nut. For use on potentiometers, switches, and jacks.
Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
Nut - Marshall, for S-HM301 Toggle Switch, Chrome
Chrome slotted nut for part S-HM301 toggle switch.
- Thread size = 15/32 - 32 thread pitch
Nut - Fender, Hex Type, for Potentiometers
Package of 12Hex nut for Fender® pots. Package of 12.
Nut - Fender®, Hex, for Rean Jacks
Package of 12Hex nuts for Rean jacks. Package of 12 Genuine Fender replacement jack nuts: 7/16-20 x 1/8 nickel-plated Used with many Fender amplifier jacks
Hedlock Fastener - 4 Sets of 2 Clips
Package of 8These super sturdy fasteners are great for speaker covers or helping prevent earthquake damage. 4 sets of 2 clips (package of 8).
Washer - Switchcraft, S1029, shoulder for insulating panels
Switchcraft shoulder washer for 3/8” bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1028. Minimum chassis hole diameter of 0.44” required to accommodate the shoulder.
Washer - Switchcraft, S1028, flat for insulating panels
Switchcraft (brown) rigid plastic washer for 3/8” bushing. Perfect for insulating metal bushings from the chassis, use with W-SC-S1029.
Washer - Rubber, Chassis Mount, 1-⅛" x ¼" Thick
Gum rubber chassis mounting washers as used on thirties vintage Zenith and Philco radio. 1/4 inner dia. Allows proper dial centering in cabinet opening. Overall dimensions 1 1/8" dia. x 1/4" thick.
Nut - Switchcraft, Knurl Nut for Switches
Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated)
Inside diameter threading:15/32"
Inside diameter threading:15/32"