Hardware

P-H264 Screw - #8-32 x 3.25", for Chassis Straps
#8-32 x 3 ¼" chassis strap screw. Single piece.
$2.25
S-HS632-X Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.65
S-HS440-X Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.50
P-H248-P Screw - 8-32, #12 Reverse Thread, Speaker Baffle Mount
Package of 4
High-quality 8/32 machine screws with #12 reverse wood screw threading at the head. These screws are a simple solution for mounting speakers to baffle boards and were commonly used on many vintage amplifiers. Nuts sold separately.
$0.55
S-H105 Screw - 1", Phillips, Oval Head, Matching T-Nut
Package of 4
1" Oval head, Phillips screw with matching t-nut. (package of 4)
$1.95
S-HS832-X Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.95
P-GTS-100X Screw - phillips, for pickguards / control plates
Package of 100
Colors Available:
Pick guard screws, phillips, ovalhead. Great for mounting countersunk pickguards, control plates, etc.
  • 7/16” threaded portion
  • Available in Black, Gold, Nickel, and Chrome plating
  • Package of 100
Starting at $8.39
S-HS-M3-X Screw - M3, Phillips, Pan Head, Machine
Package of 5
Phillips panhead machine screw, M3 metric, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
See S-HS-M3-6-X for colored 6mm M3 screws.
Starting at $0.75
S-HST8-X Screw - #8, Phillips, Pan Head, Self-Tapping, Zinc
Package of 5
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
Starting at $0.72
S-HST6-38 Screw - #6, ⅜", Self-Tapping, Phillips Pan Head, Zinc
Package of 5
#6 x 3/8 zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.50
P-H1590MS-X Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Package of 4
Colors Available:
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
Starting at $1.25
S-HS1032-X Screw - 10-32, Phillips, Pan Head, Machine, Zinc, fine thread
Package of 5
Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $1.05
S-H107 Screw - Fender®, for Pickups and Switches
Package of 12
Original Fender 6-32 screws for use on pickups and switches.
$4.45
S-H130 Screws - Original Fender, Vintage Speaker Mounting Stud / Nut
Package of 12
Original Fender speaker mounting stud/nut set. These speaker mounting studs were used on countless amps of the '50s, '60s, '70s, and beyond. The reverse thread section screws into the baffle wood and the machine screw section holds the speaker in place using the included keps nuts.
  • Used on early ’50s and ’60s vintage amplifiers
  • Fits most vintage and modern amplifiers
  • 1” of 8-32 machine head thread
  • ¼” of reverse wood thread
  • 1-½” overall length
  • 8-32 keps nuts included

Fender part number: 099-2094-000
$8.95
S-H102 Screw - #6 x ¾", Flat Head, Stainless Steel
Package of 8
Stainless steel flat head Phillips self-tapping screws. #6 x 3/4" length. Good for use with P-H266 & P-H267 & P-H1087N.
$2.89
S-HS-SKT-X Screws - M3-0.5 Socket Head Cap, 8mm Length
Package of 5
Colors Available:
Ideal for precision assembly work with close tolerances and applications needing a well tooled appearance.
Starting at $0.75
S-HS1032-1F Screw - 10-32, Phillips, Flat Head, Machine, stainless steel
Package of 5
Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.
$1.75
S-H101 Screw - #6 x ¾", Pan Head, Stainless Steel
Package of 12
Stainless steel pan head Phillips self-tapping screws. #6 X ¾" length. Good for use with #'s 3,4 and 5.
$4.35
S-HS1032-1F-SET Hardware - Fender, Screws & T-Nuts for Handle
Package of 5
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
$3.40
P-ECB-590 Screws - Dunlop, MXR, housing screws, package of 4
Package of 4
Genuine Dunlop replacement housing screws for MXR/ Dunlop pedals. Replace lost screws and keep your battery access plate on tight. 6-32 thread, Phillips head.
$1.55
P-GB-SCREW-1X Screw - Bigsby, Regular #125, Hinge
Colors Available:
Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the hinge to the edge of the guitar body.
$2.15
Out of Stock
S-HS-BTN-X Screws - M3-0.5 Button-Head Socket Cap, 8mm Long
Package of 5
Colors Available:
Button-Head Socket Cap Screws - Class 10.9, ISO 7380 Coarse Thread. Used when a wider bearing surface or smoother, more finished appearance is desired.
Starting at $0.75
S-H103 Screw - #4 x ½", Oval Head, Sheet Metal, Black Oxide
Package of 25
Black screws for attaching logos and other lightweight items. #4 x 1/2" sheet metal/wood screws, oval head, black oxide finish. Package of 25.
$3.00
S-H106 Screws - Fender®, Set Screws, for Knobs
Package of 24
Set screws for knobs. Package of 24. Fits: U.S. Telecaster / P-Bass chrome knobs and vintage-style knobs. Fender part number: 099-4922-000
$5.15
Don't see what you're looking for? Send us your product suggestions!