Hardware

W-QP-NUT-H Nut - Hex, for mounting Qingpu 3.5mm jacks
Hex nut for W-QP-419GR and W-QP-518MA 3.5mm jacks. See W-QP-NUT-K for the knurled, slotted version of this nut. See W-QP-WASHER for compatible washer
$0.15
S-H9NT Nut - Cliff, Hex, for mounting ¼" Jacks
Nut - Hex, for Cliff UK Jacks S-H902, S-H903, S-H904, & S-H905
$0.50
S-HKEP-X Nut - Kep, Hex nut with external tooth, coarse thread, zinc
Popular low-cost lock nut (also known as a Keps nut, k-lock, or washer nut) for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
Starting at $1.20
package of 10
W-QP-NUT-K Nut - Knurled, for mounting Qingpu 3.5mm jacks
Knurled, slotted nut for W-QP-419GR and W-QP-518MA 3.5mm jacks. See W-QP-NUT-H for the hex version of this nut. See W-QP-WASHER for compatible washer See S-TND-2X for nut driver tool
$0.15
W-BNUT-X Dress Nut - Befaco, Bananuts, for 3.5mm Jacks
Colors Available:
Bananuts are anodized aluminum custom minijack nuts following Buchla/Serge coloring code: blue, purple, red, orange, yellow, white, green and black. These nuts are great for color-coding jacks or color-theming modules. Sold individually.
$0.69
S-HM300N Nut - Marshall, for 15/32-32 threading, Chrome
Chrome dress nut fits any standard 15/32-32 threaded bushing such as on Carling full-sized toggle switches and many footswitches. Intended for use on S-HM301 toggle switch. This style of nut is similar to slotted round nuts found on plexi Marshall amps.
  • Thread size = 15/32 - 32 thread pitch
    $1.75
    W-QP-NUT-BRASS Nut - Mod® "Top Brass", for Qingpu and other 3.5mm jacks
    Mod® "Top Brass" nuts are the easiest way to upgrade your Eurorack module or other 3.5 mm application to a more regal look - we call it "Top Brass". Designed with the same outer dimensions as Qingpu knurled nuts, these round brass nuts will fit any module using Qingpu or other similar metal-bushing jacks without covering up the jack labels. As their name implies, the Mod® "Top Brass" nuts are made out of pure brass, and while they look incredible on their own, their appearance also pairs extremely well with the immersion gold used on Make Noise and other similar modules. Rather than being knurled, Top Brass nuts have a smooth outer edge for a clean look. The nuts are slotted and will work with all existing nut drivers intended for use with the knurled Qingpu-style nuts. "Top Brass" nuts use M6x0.5 threading which matches the bushing on the ubiquitous Qingpu jacks and many of their copies.
    $0.35
    R-VC-NUT Nut - CTS, 3/8-32, Nickel, for 450 Series Potentiometers
    Replacement nut for CTS 450 series potentiometers and others.
    • 3/8-32 threading
    • Sold individually
    $0.55
    R-VNUT-M7 Nut & Washer - for M7x0.75 Potentiometers
    Replacement nut for Marshall style pots with 7mm bushing. Sold individually
    $0.25
    R-VNUT-38 Nut & Washer - Panel, for ⅜" Potentiometers
    Replacement nut and washer for pots with a ⅜" bushing diameter.
    $0.75
    P-H264-NUT Nut - 8-32, Keps with external tooth, zinc
    Nut - Keps with external tooth, Zinc, fits screws for chassis straps, 8-32 X 3 1/4, package of 10. Popular low-cost lock nut for commercial and industrial applications. Locking action is achieved when the nut is tightened against a bearing surface as the teeth of the lock washer dig into it.
    $1.25
    package of 10
    S-HNUT-38X Finishing Nut - For ⅜” Jacks and Pots, ⅜”-32 UNEF-2A
    Colors Available:
    High quality plated ⅜” nuts for jacks and potentiometers. These nuts are perfect for amplifier, pedal and synthesizer builds with high aesthetics or color theming. The ⅜”-32 UNEF-2A threading fits many ⅜” bushing parts such as Switchcraft ¼” jacks and CTS pots.
    Starting at $0.64
    package of 5
    P-H52-NUT-DRESSX Nut - Large Dress Nut, Carling, 15/32-32UNS
    Colors Available:
    Genuine Carling Technologies dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a chamfered edge with a knurled bottom half for a unique look that is simple to tighten down. The top of the threading is capped. These fit any 15/32-32UNS bushing but can also work with some M12 bushings.
    $1.29
    S-H9NT-R Nut - Cliff, Hex, Red, used on Loudspeaker Output Jacks
    Red Cliff hex nut, often used on guitar amplifiers to identify loudspeaker outputs.
    $0.89
    S-HHNX Nut - Hex finished, fine thread, zinc
    Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
    Starting at $0.30
    package of 5
    S-HBNX Nut - Hex, Brass, Imperial Thread
    Imperial threaded hex nuts made of solid brass. These brass hex nuts visually match the nuts found in vintage Marshall amplifiers. They are a great choice for restoration or replica builds. These will also work well in many other types of projects. Pairs with S-HSB4-X, S-HSB6-X, and S-HSB8-12 screws. S-HLWX-B lock washers and S-HBWX flat washers are also available.
    Starting at $1.09
    package of 5
    S-H9NT-W Nut - Cliff, Hex, for ¼" white Jacks
    Hex nut for white Cliff Jacks, threading: 7/16-20. Also used on the footswitch jack in some Marshall amps.
    $0.89
    S-HCN-M6 Nut - Cage, Zinc-plated Steel, M6, Panel Range .064-.105”
    Common replacement for Marshall heads and many other applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening. Fits panels 0.064" to 0.105" thick with square holes cut 0.375" to 0.38".
    • M6 Threading
    • Panel Range .064”-.105”
    • Fits 0.375" to 0.38" Square Holes
    • Zinc Finish
    • Sold Individually
    $1.39
    S-HHN-M3 Nut - M3-0.5 Hex Nut, Stainless Steel
    A threaded fastener made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.
    $0.80
    package of 5
    S-HTNX Nut - T-Nut, Zinc, for fastening metal to wood or plastic
    Zinc t-nut. Used for fastening metal to products made of wood, particle board or plastic. Low carbon steel. Package of 5. Multiple sizes available.
    Starting at $1.15
    package of 5
    W-BNUTL-BK Dress Nut - Befaco, Bananuts, for M7 Pots
    Larger threaded black Bananuts for mounting potentiometers or other hardware with M7 bushings. These nuts look great beneath smaller sized knobs.
    $0.69
    S-H514 Nut & Washer - Panel, for Fender / Marshall Jacks
    M12 x1.0 threading. Nut and washer set for panel-mounting jacks.
    $1.55
    package of 5
    P-H52-DRESS-WIDE Nut - Wide Dress Nut, Threaded Through, 15/32-32UNS
    Wide dress nuts for use with full size toggle switches and footswitches. These dress nuts feature a wide chamfered edge that pairs nicely with smaller dress nuts such as P-H54-DRESS-WIDE, P-H54-DRESS-THRU, and P-H54-NUT-DRESS. These nuts are threaded through and fit any 15/32-32UNS bushing such as Carling footswitches and full sized toggles.
    $1.75
    S-HCN1032 Nut - Cage, Zinc, 10-32, Electroplate Panel Range .064-.105
    Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.
    • 10-32 Threading
    • Panel Range .064-.105
    • Zinc Finish
    • Sold Individually
    $0.85
    Don't see what you're looking for? Send us your product suggestions!