Guitar Parts & Pickups

Retrofit your USA '67-'82 Fender P & J Bass for drop tuning! Also retrofits Geddy Lee, reissue '67-'82 Fender. Fits 11/16 in. headstock holes. Installation instructions and mounting hardware included.

Gold anodized aluminum Telecaster style pickguard with 8 mounting holes. This pickguard has two pickup mounting holes for use with neck pickups that mount directly to the pickguard. All pickguard mounting holes are countersunk and the pickup mounting holes are flat.

Three-ply Telecaster® style pickguards with 8 mounting holes. This pickguard has no pickup mounting holes for use with neck pickups that mount directly to the guitar’s body. All mounting holes are countersunk.

Gold anodized aluminum P-Bass style pickguard with 13 mounting holes. This pickguard is routed for a standard P-Bass style pickup and wiring configuration. All mounting holes are countersunk.

Anodized aluminum Stratocaster® style pickguards with 11 mounting holes. These pickguards are cut for the classic Strat® configuration. All mounting holes are countersunk.

Replacement pickguard for Fender® Standard Stratocaster models. These pickguards have eleven mounting holes and are cut for the classic strat configuration. Fits most American and Mexican Standard Stratocasters®. Features:

• 3-ply / 2.5mm thickness
• 11 mounting holes
• Shielding over electronics cavity
• Fits 3/8" bushing pots
• Various colors available

These pickguards have eleven mounting holes and feature cutouts for two single coil pickups and a humbucker in the bridge position. Fits most American and Mexican Standard Stratocasters® that are routed for a humbucker bridge pickup.

Replacement pickguard for Fender® '57 Strat® models. These three-ply pickguards have eight mounting holes. Fits most American, Japanese, and Mexican '57 Stratocasters®.
Features:

• 3-ply / 2.5mm thickness
• 8 mounting holes
• Shielding over electronics cavity
• Fits 3/8" bushing pots

Gold anodized aluminum Telecaster® style pickguard with 5 mounting holes. This pickguard has two pickup mounting holes for use with neck pickups that mount directly to the pickguard. All pickguard mounting holes are countersunk and the pickup mounting holes are flat.

Replacement pickguard for Telecaster guitars. These pickguards feature five mounting holes. Cut from a thicker single ply sheet, these pickguards offer a vintage style with added rigidity.

Replacement pickguard for Fender® American Deluxe Strat models. These pickguards have eleven mounting holes and feature cutouts for two single coil pickups and a humbucker in the bridge position. The humbucker cutout has rounded corners for a flush fit with uncovered pickups. Fits most American Deluxe Stratocasters® that are routed for a humbucker bridge pickup. Features:

• 3-ply / 2.5mm thickness
• 11 mounting holes
• Shielding over electronics cavity
• Fits 3/8" bushing pots
• Various colors available

Replace your sloppy, worn out tuning machines with a set of Hipshot American Classics. The HB2 is a direct replacement for the Schaller® BMF tuner that was first found on CBS era Fender® basses manufactured between 1967 and 1982. Since then, the BMF tuner has been featured on countless boutique builds and Custom Shop models.

Tremolo Arm, Screw-Down, Steel 5mm-0.8p

• Material: Steel 5mm
• Handle Type: Screw-down
• Vintage Thread: M5.0 - 0.8p
• Plating: Chrome
• Tip: White

Dunlop Accu-Fret® fretwire is manufactured from a durable nickel/silver alloy and delivers a warm and clear tone-the preferred brand for guitar builders and repairmen worldwide. Good on early Fenders®.

Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm with radiused bottom.

Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.

This brass nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size.

• Thickness = 9/64 inches (3.47mm)
• Flat Bottom Length = 1 11/16 inches (43 mm)
• Height at ends = 13/64 inches (5.25mm)
• Height at middle = 15/64 inches (6mm)

This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.

• Length = 2 1/64 inches (51.25mm)
• Height = 11/64 inches (4.55mm)
• Thickness = 1/8 inch (3.1mm)

Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

• Length = 1 41/64 inches (41.52mm)
• Height #1 (fretboard side) = 13/64 inches (5.06mm)
• Height #2 (headstock side) = 13/64 inches (5mm)
• Thickness at bottom = 9/64 inches (3.46mm)
• Thickness at top = 1/8 inches (3.1mm)

Stratocaster guitar nut - plastic construction

Replacement jack plate for Stratocasters

Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.

Replacement jack plate for Telecasters

This modern cupstyle Tele® jackplate is milled from brass and has a shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!