1. Home
  2. Products
  3. Guitar Parts & Pickups

Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
products per page
K-704 Kit - Fender® Stratocaster® Mid Boost Kit
Genuine Fender® Mid Boost upgrade kit for Strats with active electronics. This circuit is used in the signature Eric Clapton and Buddy Guy strats and is commonly referred to as the Clapton Boost. The Mid Boost knob adjusts gain from 0 dB (no boost) to 25 dB (maximum boosted mids). This boost sounds great clean and adds powerful control to distortion.
$59.95
P-200-X Pickguard - For Gibson® Les Paul®, Humbucker
Colors Available:
Pickguards for Gibson® Les Paul® guitars with two humbucker pickups. Mounting bracket is sold separately. See P-GKLU-KLP1731C. See dimensional drawing below for size details.
Starting at $7.39
P-202-X Backplate - For Gibson® Les Paul®
Colors Available:

Backplate cover for Gibson® Les Paul® electronics cavities. These covers are made of single-ply material with four mounting holes and a foil backing.

$5.95
P-203-X Switch Cover - For Gibson® Les Paul®
Colors Available:
Round back cover for Gibson® Les Paul® switch cavities. These switch covers are made of single-ply material with three mounting holes and a foil backing.
$2.19
P-B-THUMB Thumb rest - Fender®, for P-Bass and J-Bass, black
Original Fender® black thumb rest replacement for Precision and Jazz Bass. Mounting hardware included.
$4.95
P-BAR-H492-U-10 Keeper Bar - 10 Hole, 49.2mm, Raw Steel, USA
Original, made in USA, 10-hole keeper bar for 49.2mm spacing. This P.A.F. correct keeper bar is great for humbucker and P-90 pickups. Made of raw steel.
$4.35
P-BAR-P90S-U-10 Keeper Bar - 10 Hole, 50mm, Raw Steel, USA
Original, made in USA, 10-hole keeper bar for 50mm spacing. The keeper bar is designed for use with soapbar P-90 pickups. The spare holes are for the pickup mounting screws. This premium keeper bar is made of raw steel.
$4.35
P-BAS-H492-CH-SL-U Baseplate - Humbucker, 49.2mm, Center Hole, Short Leg, USA
Original, made in USA, humbucker frame with center holes for making single coil pickups in a humbucker footprint. This premium baseplate has a 49.2mm spacing and is made of raw nickel silver.
$6.88
P-BAS-H492-SL-U Baseplate - Humbucker, 49.2mm, Universal, USA
Original, made in USA, humbucker frame with universal holes for multiple configurations. This premium baseplate has a 49.2mm spacing and is made of raw nickel silver.
$7.16
P-BAS-H492P-U Baseplate - Humbucker, 49.2mm, P.A.F., USA
Original, made in USA, P.A.F.-correct humbucker frame with long legs. This premium baseplate has a 49.2mm spacing and is made of raw nickel silver.
$6.54
P-BAS-H50-SL-U Baseplate - Humbucker, 50mm, Universal, USA
Original, made in USA, humbucker frame with universal holes for multiple configurations. This premium baseplate has a 50mm spacing and is made of raw nickel silver.
$6.88
P-BAS-MH-SL-U Baseplate - Mini Humbucker, 50mm, USA
Original, made in USA, mini humbucker frame. This premium baseplate has a 50mm spacing and is made of raw nickel silver.
$6.55
P-BAS-P90D-B-U Baseplate - P-90, Dog Ear, Bridge, 50mm, USA
Original, made in USA, dog ear P-90 frame with a 50mm spacing traditionally used in the bridge position. This premium baseplate is made of raw nickel silver.
$7.73
P-BAS-P90D-N-U Baseplate - P-90, Dog Ear, Neck, 47.55mm, USA
Original, made in USA, dog ear P-90 frame with a 47.55mm spacing traditionally used in the neck position. This premium baseplate is made of raw nickel silver.
$7.73
P-BAS-P90S-U Baseplate - P-90, Soap Bar, 50mm, USA
Original, made in USA, soap bar P-90. This premium baseplate has a 50mm spacing is made of raw nickel silver.
$7.58
P-BAS-TB-U Baseplate - Tele, Vintage Correct, Raw Steel, USA
Original, made in USA, tele baseplate with vintage-correct specifications. This premium baseplate is made of raw steel.
$4.34
P-BAS-TB-U-COP Baseplate - Tele, Vintage Correct, Cyanide Copper, USA
Original, made in USA, tele baseplate with vintage-correct specifications. This premium baseplate is made of steel and features a cyanide copper plating. The cyanide copper plating is not polished and will have varied appearances.
$4.34
P-BH-ST-X Bridge - Hipshot, SuperTone, 2 Point Bass
Colors Available:
Hipshot 4 string Supertone 2 point bass bridge. A direct replacement for 1967 to 1973 Gibson 2 point bass bridges (e.g. Thunderbird, SG Bass, etc.) using the existing hole pattern. Features complete adjustability for precise intonation, independent string height and side-to-side string spacing. Includes: (2) 5/16-20 hex cap socket screws and (2) hex/allen keys: 1/16” and 5/64”
$126.50
P-BH-XK-2C Tuner - Hipshot, BT2 Bass Xtender, Nickel
Retrofit your USA '67-'82 Fender P & J Bass for drop tuning! Also retrofits Geddy Lee, reissue '67-'82 Fender. Fits 11/16 in. headstock holes. Installation instructions and mounting hardware included.
$99.95
P-BH-XK-3C Tuner - Hipshot, BT3 Bass Xtender, Nickel
Retrofit your pre-CBS Fender equipped with reverse winding Kluson tuning machines for drop tuning. Fits 11/16 in. headstock holes. Installation instructions and mounting hardware included.
$85.95
P-BNUT-TUSQ-EPS-1XL Nut - Tusq XL, Pre-slotted, for Precision Bass
The PQL-1204-00 is the perfect option to upgrade the nut on your Fender Precision style Bass guitar. It is pre-slotted making installation quick and simple.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:
  • Length - 1.65 in. (41.91mm)
  • Width - 0.125 in. (3.17mm)
  • Height - 0.187 in. (4.75mm)
  • E to G - 1.25 in. (31.75mm)
$13.98
P-BNUT-TUSQ-EPS-2XL Nut - Tusq XL, Pre-slotted, for Jazz Bass
The PQL-1214-00 is the perfect option to upgrade the nut on your Fender Jazz style bass. It is pre-slotted for a quick and simple install.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:
  • Length - 1.554 in. (39.47mm)
  • Width - 0.128 in. (3.25mm)
  • Height - 0.187 in. (4.75mm)
  • E to G - 1.223 in. (31.06mm)
$13.98
P-BOB-H492P-U-SCR-X Bobbin - Humbucker, P.A.F., 49.2mm, Screw Side, Butyrate, USA
Colors Available:
Original, made in USA, P.A.F.-correct bobbins for making humbucker pickups. These screw side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing.
$3.03
P-BOB-H492P-U-SLU-X Bobbin - Humbucker, P.A.F., 49.2mm, Slug Side, Butyrate, USA
Colors Available:
Original, made in USA, P.A.F.-correct bobbins for making humbucker pickups. These screw side bobbins are made of butyrate molded in casts of the originals and feature a 49.2mm spacing.
$3.03
Don't see what you're looking for? Send us your product suggestions!