Guitar Parts & Pickups

High quality tremolo featuring height-adjustable saddles that lock to a hardened steel baseplate. Threaded studs and bushings, springs, spring holder, allen wrenches and adjustable-tension arm are included. Looking for a great tremolo system for better tuning stability, string energy transfer and note sustain? Then you have found it right here. Hardware included.

Made in U.S. Modern spec tune-o-matic bridge. No retaining wire. Plated, preslotted saddles. Hardware included This is an awesome OEM bridge for builders or the DIY repairman offering a longer adjustment area and more mass than the original ABR-1 bridge. It matches Gibson specifications and is a drop-in, non-modification required replacement part.

• Thread = M5 - 0.8 Metric (as used by Gibson on Nashville Models)
• Post to Post Spacing = 2.93 in. (74.5mm)
• Saddle Notch = Center Notched Saddles
• Saddle Material = Zmac
• Bridge Material = Zmac
• Post/Thumbwheel Material = Brass
• Radius = 12 inch
• Post Top Diameter = .195 Inches / 4.95mm
• Bridge Center To Center Spacing = 2.93 inches
• Saddle Spacing = 10.4 mm

The Gotoh GTC101 is a fixed bridge for hard tail guitars such as Strat® style guitars with through-body string mounting. The bridge includes plated brass saddles for a warmer tone and features a 52.5mm string spacing. Saddle intonation and height can be individually adjusted with the included hex wrench. Mounting screws included.

A tremolo-unit includes the following accessories. Arm, spring, spring-holder, wrench, stud-bolt, screws. U.S.A. threads screws. String spacing:

• 56mm from low E string to high E string
• 11.2mm between each string

Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.

Made in U.S. vintage-spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with raw brass saddles. Mounting hardware sold separately. For a full set with all hardware included, please see P-GKLU-KLP128X. The bridge features the vintage-style retaining wire that secures the raw brass saddles and intonation screws onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

Gotoh's unique grooving on the “In-Tune” saddles results in more exact intonation compared to traditional vintage-style saddles. Each saddle is reversible and can be used in any position. Titanium construction is used for rich harmonic overtones and long sustain. The brass saddles create a bright sound. 10.8mm string spacing

Direct replacement for most Fender P-Bass and Jazz Bass guitars. Superior high quality and precision made. This is for those who demand only the best for their Bass without breaking the bank. Mounting screws included.

Made in U.S. vintage spec ABR-1 bridge with no retaining wire and plated brass saddles. Hardware sold separately. See P-GKLU-KLP127X for a complete set. The bridge uses string tension along with the set screws to secure the brass saddles onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

The Hipshot US Contour bridge is unlike any tremolo system out there. Hardened steel pivot pins inserted into a machined brass top plate give the US Contour a bell like tonal quality and silky smooth whammy action! Coupled with a solid machined steel tremolo block, the US Contour can achieve tremendous sustain and volume. Best of all, it is designed to retrofit any guitar using the American Standard tremolo routing convention. No additional routing required!

Features Include:

• Adjustable tension press in tremolo arm
• Stainless steel saddles
• High quality springs
• Chrome finished brass top plate

Genuine Fender replacement chrome bridge assembly for use with most Standard series Telecaster models manufactured from 2004-present (does not retrofit to a three-screw mounting design without modification). Bridge pickup and mounting hardware not included.

• Chrome bridge assembly
• Six adjustable block saddles
• Four-screw mounting design
• Mounting hardware not included
• For Standard Series Telecaster models (2004-present)

Designed to for use with the Telecaster® single coil pickup; this heavier brass bridge plate features six allen-adjustable brass saddles. Strings mount through the guitar body and all of the mounting screws are included. Hardware included.

Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired with plated brass saddles. Mounting hardware sold separately. The bridge features the vintage-style retaining wire that secures the plated brass saddles and intonation screws onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

Original Fender® modern six-saddle bridge assembly for use on American, American Deluxe and American Standard series Telecaster guitars manufactured from 1986-2007. Includes string-through-body plate, six American series bridge saddles with offset intonation screws, mounting hardware and adjustment wrenches.

Genuine Fender chrome hard-tail bridge assembly for use on Classic and Pawn Shop series instruments. Includes six stamped saddles, intonation screws and springs, and saddle-height adjustment screws.

• String-through-body design
• Mounting hardware not included
• 2-7/32" String Spacing

Direct replacement for most Fender 5 String P-Bass and Jazz Bass guitars. Superior high quality and precision made. This is for those who demand only the best for their Bass without breaking the bank. Mounting screws included. Hardware included.

Genuine Bigsby mounting screws pack. This pack comes with a variety of Bigsby screws common to many of their tremolo units. Item Qty BigSby Part Number Body Mount Screws 4 0495-1927 Hinge Mount Screws 4 0495-1923 Handle Bracket Set Scre 2 0495-1931

Original Fender® vintage-style six-saddle bridge assembly for use on American Vintage series and Deluxe Nashville Telecaster guitars. Includes string-through-body plate, six nickel-plated "barrel" saddles, mounting hardware and adjustment wrenches.

At first blush, the KickAss™ might seem like a simple, heartfelt tribute to Leo Quan’s BadAss II®. A closer look, however, reveals significant improvements under the hood that put this bridge in a class of its own. Hipshot worked hard to ensure that the KickAss™ possesses the soul of the beloved original without being a knockoff.

If you are looking for a tremolo that is designed for enhanced sustain and better reliability, then you have found it. The VSVG Vintage tremolo features enlongated baseplate holes so the screws won't bind and it gives a very smooth, accurate return to pitch. With the string mounting holes being staggered in the steel block you will find much more tuning stability because of the more consistent string angle over the adjustable locking bent-steel saddles. Hardware included.

The ResoMax 4mm bridge is made from Graphtech’s ResoMax alloy. ResoMax is lightweight, high strength, and full of harmonics that will leave your guitar dripping with tone. It comes preloaded with String Saver saddles to reduce string breakage and improve tuning stability. All ResoMax bridges feature Graphtech’s patented magnetic lock to the steel posts that come with it. 4mm posts are used in a lot of American and European-built guitars, and brands such as Gibson, Godin, and Duesenberg. Please see the measurement guide to verify compatibility. The ResoMax NV2 is loaded with Graphtech’s Patented String Saver Saddles. These saddles are impregnated with PTFE and will dramatically reduce string breakage and improve tuning performance.

(Non-serialized) Bridge Plate. Used on American Vintage Series Telecaster® guitars manufactured from 1986 to the present. Mounting hardware included.
The standard version comes with 3 brass vintage Tele® saddles and the Road Worn version features three vintage steel saddles.

Gotoh’s Telecaster bridge has the vintage look and mounting layout with a few modern additions: The In-Tune saddles give you the vintage look with unique grooves cast into the saddle to move the contact point of each string for more accurate intonation. Each saddle is reversible and can be used in any position. This gives you a huge advantage over traditional barrel style saddles that were never designed with precision intonation in mind. The brass saddles will give you that bright Tele twang! The stamped steel base plate’s cut down sides give you the unrestricted string access that many modern players prefer.

Gotoh 510TS Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. Comes stock with a vintage steel block with more mass and better tone. These are top of the line Gotoh tremolo units. Tremolo-unit includes the following accessories: Arm, Spring, Spring-holder, Wrench, Stud-bolt, Screw etc… Hardware included.