Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
W-SC-W0213 Switch - Switchcraft, Pickup Selector, for Gibson® Straight
Colors Available:
Switchcraft 3 position Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.
Starting at $15.95
P-GTNN06 Nut - Graphite, for Fender, blank unslotted
This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.
  • Length = 2 1/64 inches (51.25mm)
  • Height = 11/64 inches (4.55mm)
  • Thickness = 1/8 inch (3.1mm)
$4.55
P-K548-X Knob - Top Hat, Black with Silver Cap, Gibson Style
Gibson style top hat knob. Fits fine knurled pot shafts.
$2.25
P-SW64 Switch - 3-Way lever for Telecaster
Oak 3 way lever switch for Tele® Standard U.S. size. Fits 1/16" x 1-1/16" slot.1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
$10.50
P-GTNN07 Nut - Bone, for Gibson, 43mm X 5.9mm X 8mm, Flat
Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.
$5.55
P-G106H-BWB Pickguard - For Standard Strat®, HSS, 11 Hole, 3-Ply
These pickguards have eleven mounting holes and feature cutouts for two single coil pickups and a humbucker in the bridge position. Fits most American and Mexican Standard Stratocasters® that are routed for a humbucker bridge pickup.
$10.25
P-K540X Knob - Speed, Gibson Style see-through
Colors Available:
Gibson style speed knob. For 24 teeth knurled shaft.
$1.95
P-GTSJP-X Jack Plate - replacement for Stratocaster
Colors Available:
Replacement jack plate for Stratocasters
Starting at $4.55
P-G106-X Pickguard - for Standard Strat®, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® Standard Stratocaster models. These pickguards have eleven mounting holes and are cut for the classic strat configuration. Fits most American and Mexican Standard Stratocasters®. Features:
  • 3-ply / 2.5mm thickness
  • 11 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
  • Various colors available
Starting at $11.30
P-BH-A-4BC Bridge - Hipshot, 4-string Type A Bass, brass and chrome
Retrofits your Fender five hole mount bridge on your 4 string bass using the two outer holes and the center hole. The type A saddles feature variable string spacing adjustment for even greater versatility and fine intonation adjustment as well. 4 String Bass Bridge. Type A Fender Mount (3 Mounting Holes). Non-string-through.
$100.00
P-K550X Knob - Top Hat, Gibson Style see-through
Colors Available:
Gibson style top hat knob. Multiple color options available. Fits fine knurled pot shafts.
$1.95
P-GTTJP-C Jack Plate - for Telecaster, Chrome
Replacement jack plate for Telecasters
$5.10
P-G109-X Pickguard - for American Deluxe Strat®, HSS, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® American Deluxe Strat models. These pickguards have eleven mounting holes and feature cutouts for two single coil pickups and a humbucker in the bridge position. The humbucker cutout has rounded corners for a flush fit with uncovered pickups. Fits most American Deluxe Stratocasters® that are routed for a humbucker bridge pickup. Features:
  • 3-ply / 2.5mm thickness
  • 11 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
  • Various colors available
$11.30
P-GH-TM-1C Tuner - Hipshot, HB2 for Bass, nickel
Replace your sloppy, worn out tuning machines with a set of Hipshot American Classics. The HB2 is a direct replacement for the Schaller® BMF tuner that was first found on CBS era Fender® basses manufactured between 1967 and 1982. Since then, the BMF tuner has been featured on countless boutique builds and Custom Shop models.
$34.95
P-K546-X Knob - Top Hat, Gold with Gold Cap, Gibson Style
Gibson style top hat knob. Fits fine knurled pot shafts.
$2.25
P-H166 Jack Plate - Electrosocket, for Tele, chrome plated brass
This modern cupstyle Tele® jackplate is milled from brass and has a shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
$10.75
P-PGM-X Pickguard Blanks - 12” x 18” sheet, 0.095” thickness
Color, Plys Available:
Blank pickguard material sheets for cutting custom pickguards, truss rod covers, and back plates. These sheets come in a variety of colors as well as single ply and three ply options. All colors feature a gloss surface.
Starting at $12.50
P-GT102X Switchwashers - Rhythm / Treble, Gold Lettering, for Les Paul
Colors Available:
This Rhythm - Treble Ring for Gibson® Les Paul® is on thin plastic with Gold Lettering. The self-adhesive backing makes it easy to apply under the washer and nut of your typical 3-way toggle switch.
$1.95
P-H703X Control Plate - for Jazz Bass (J-Bass), Chrome
Standard (4-hole) and vintage (3-hole) versions. Replacement for most Jazz Bass style guitars. Made in Korea.
Starting at $8.20
P-NECK-S-03 Neck - for Stratocaster Guitar, Rosewood
Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius rosewood fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. Nut not included. Fender Licensed replacement neck. Heel width is 2 3/16".
$135.00
On Backorder
P-H708 Control Plate - Jaguar Style, Selector Switch, Chrome
Jaguar style selector switch plate in chrome. Perfect replacement for most Jaguar style guitars. This version features the stock three switch configuration originally used for selecting pickups and engaging the mid-tone cut.
$5.95
P-GTFW6130 Fret wire - Dunlop, pre-cut, large, for early Gibson
Package of 24
Dunlop®, 6130,.036" x.106", 28% nickel/silver, hard alloy, 2 5/8" long, large/jumbo size, good on early Gibson®, 24 pieces
$13.95
P-H706 Control Plate - Jaguar Style, Preset, Chrome
Jaguar style preset control plate in chrome. Perfect replacement for most Jaguar style guitars. 4.57” x 1.79” plate mounting center distance (0.14” diameter, recessed).
$6.95
P-NECK-T-32 Neck - for Telecaster Guitar, Rosewood
Replacement Telecaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius rosewood fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Telecaster®. Nut not included. Fender Licensed replacement neck.
$135.00
On Backorder
Don't see what you're looking for? Send us your product suggestions!