Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
P-GTSPRN-X Tremolo springs - Replacement for Fender Style Tremolos
Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.
Starting at $1.15
P-GTNN10 Nut - Plastic, for Strat
Plastic strat guitar nut.
$1.95
P-GTNN04-FLAT Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Flat
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.
$3.95
P-GTNN04 Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Radiused
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm with radiused bottom.
$4.25
P-GTARMV01 Tremolo arm - for Vintage Stratocaster
Tremolo Arm, Screw-Down, Steel 5mm-0.8p
  • Material: Steel 5mm
  • Handle Type: Screw-down
  • Thread: M5.0 - 0.8p
  • Plating: Chrome
  • Tip: White
$4.50
P-GTNN06 Nut - Graphite, for Fender
This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.
  • Length = 2 1/64 inches (51.25mm)
  • Height = 11/64 inches (4.55mm)
  • Thickness = 1/8 inch (3.1mm)
$4.55
P-GTNN06-SLOT Nut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
$4.55
P-GTNN05 Nut - Brass, for Fender
This brass nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size.
  • Thickness = 9/64 inches (3.47mm)
  • Flat Bottom Length = 1 11/16 inches (43 mm)
  • Height at ends = 13/64 inches (5.25mm)
  • Height at middle = 15/64 inches (6mm)
$6.50
Don't see what you're looking for? Send us your product suggestions!