Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
P-NECK-S-01 Neck - for Stratocaster Guitar, Maple, Headstock Adjust
Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius maple fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. Nut not included. Fender Licensed replacement neck.
$135.00
P-NECK-S-03 Neck - for Stratocaster Guitar, Rosewood
Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius rosewood fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. Nut not included. Fender Licensed replacement neck. Heel width is 2 3/16".
$135.00
On Backorder
P-NECK-T-32 Neck - for Telecaster Guitar, Rosewood
Replacement Telecaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius rosewood fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Telecaster®. Nut not included. Fender Licensed replacement neck.
$135.00
On Backorder
P-NECK-T-30 Neck - for Telecaster Guitar, Maple, Headstock Adjust
Replacement Telecaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 inch radius maple fingerboard. The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Telecaster®. Nut not included. Fender Licensed replacement neck.
$125.95
On Backorder
P-BH-A-4BC Bridge - Hipshot, 4-string Type A Bass, brass and chrome
Retrofits your Fender five hole mount bridge on your 4 string bass using the two outer holes and the center hole. The type A saddles feature variable string spacing adjustment for even greater versatility and fine intonation adjustment as well. 4 String Bass Bridge. Type A Fender Mount (3 Mounting Holes). Non-string-through.
$100.00
P-BH-XK-2C Tuner - Hipshot, BT2 Bass Xtender, nickel
Retrofit your USA '67-'82 Fender P & J Bass for drop tuning! Also retrofits Geddy Lee, reissue '67-'82 Fender. Fits 11/16 in. headstock holes. Installation instructions and mounting hardware included.
$71.50
On Backorder
P-GH-TM-1C Tuner - Hipshot, HB2 for Bass, nickel
Replace your sloppy, worn out tuning machines with a set of Hipshot American Classics. The HB2 is a direct replacement for the Schaller® BMF tuner that was first found on CBS era Fender® basses manufactured between 1967 and 1982. Since then, the BMF tuner has been featured on countless boutique builds and Custom Shop models.
$27.45
On Backorder
P-GTFW6230 Fret wire - Dunlop, pre-cut, medium, for early Fender®
Package of 24
Dunlop Accu-Fret® fretwire is manufactured from a durable nickel/silver alloy and delivers a warm and clear tone-the preferred brand for guitar builders and repairmen worldwide. Good on early Fenders®.
$13.95
P-PGM-X Pickguard Blanks - 12” x 18” sheet, 0.095” thickness
Color, Plys Available:
Blank pickguard material sheets for cutting custom pickguards, truss rod covers, and back plates. These sheets come in a variety of colors as well as single ply and three ply options. All colors feature a gloss surface.
$12.50
P-G106-X Pickguard - for Standard Strat®, 11 Hole, 3-Ply
Colors Available:
New!:
Replacement pickguard for Fender® Standard Stratocaster models. These pickguards have eleven mounting holes and are cut for the classic strat configuration. Fits most American and Mexican Standard Stratocasters®. Features:
  • 3-ply / 2.5mm thickness
  • 11 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
  • Various colors available
Starting at $11.30
P-G109-X Pickguard - for American Deluxe Strat®, HSS, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® American Deluxe Strat models. These pickguards have eleven mounting holes and feature cutouts for two single coil pickups and a humbucker in the bridge position. The humbucker cutout has rounded corners for a flush fit with uncovered pickups. Fits most American Deluxe Stratocasters® that are routed for a humbucker bridge pickup.
Features:
  • 3-ply / 2.5mm thickness
  • 11 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
  • Various colors available
$11.30
P-H166 Jack Plate - Electrosocket, for Tele, chrome plated brass
This modern cupstyle Tele® jackplate is milled from brass and has a shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
$10.75
P-SW64 Switch - 3-Way lever for Telecaster
Oak 3 way lever switch for Tele® Standard U.S. size. Fits 1/16" x 1-1/16" slot.1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
$10.50
P-SW63 Switch - 5-Way lever for Stratocaster
Oak® single wafer 5 way lever switch.Standard U.S. size. Fits 1/16" x 1-1/16" slot. 1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
$10.50
P-G104-X Pickguard - For '62 Strat®, 11 Hole, 3-Ply
Colors Available:
New!:
Replacement pickguard for Fender® '62 Strat® models. These pickguards have eleven mounting holes with one of the holes centered between the middle and neck pickups for compatibility with most American, Japanese, and Mexican '62 Stratocasters®.
Starting at $10.25
P-G107-BWB Pickguard - For '57 Strat®, 8 Hole, 3-Ply
Replacement pickguard for Fender® '57 Strat® models. These three-ply pickguards have eight mounting holes. Fits most American, Japanese, and Mexican '57 Stratocasters®.
Features:
  • 3-ply / 2.5mm thickness
  • 8 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
$10.25
On Backorder
P-G106H-BWB Pickguard - For Standard Strat®, HSS, 11 Hole, 3-Ply
These pickguards have eleven mounting holes and feature cutouts for two single coil pickups and a humbucker in the bridge position. Fits most American and Mexican Standard Stratocasters® that are routed for a humbucker bridge pickup.
$10.25
P-G107S-X Pickguard - for '57 Strat®, 8 Hole, Single Ply
Colors Available:
Replacement pickguard for Fender® 1957 Strat® models. These single ply pickguards have eight mounting holes. Cut from a thicker single ply sheet, these pickguards offer a vintage style with added rigidity. Fits most American, Japanese, and Mexican '57 Stratocasters®.
$10.25
P-G108-AW Pickguard - for Tele, 5 Hole, Single Ply
Replacement pickguard for Telecaster guitars. These pickguards feature five mounting holes. Cut from a thicker single ply sheet, these pickguards offer a vintage style with added rigidity.
$10.25
P-G103 Pickguard - P-Bass, 3-Ply, Black / White / Black
Three-ply black/white/black P-Bass style pickguard with 13 mounting holes. This pickguard is routed for a standard P-Bass style pickup and wiring configuration.
$10.25
P-PGM-AB-X Pickguard Blanks - 10” x 12”, 0.025” thick, adhesive, acoustic
Colors Available:
Blank thin pickguard material sheets with adhesive backing for acoustic guitars. The pre-applied adhesive makes for a simple installation once cut. All colors feature a gloss surface.
Starting at $8.95
P-H703X Control Plate - for Jazz Bass (J-Bass), Chrome
Standard (4-hole) and vintage (3-hole) versions. Replacement for most Jazz Bass style guitars. Made in Korea.
Starting at $8.20
P-H705 Control Plate - Jaguar Style, Master, Chrome
Jaguar style master control plate in chrome. Perfect replacement for most Jaguar style guitars. 4.12” x 1.86” plate mounting center distance (0.14” diameter, recessed).
$7.95
P-G102 Pickguard - Tele style, 3-Ply, Black / White / Black
Three-ply black/white/black ’62 Telecaster style pickguard with 8 mounting holes. This pickguard has no pickup mounting holes for use with neck pickups that mount directly to the guitar’s body.
$7.39
Don't see what you're looking for? Send us your product suggestions!