Guitar Parts & Pickups

Gotoh 510TS Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. Comes stock with a vintage steel block with more mass and better tone. These are top of the line Gotoh tremolo units. Tremolo-unit includes the following accessories: Arm, Spring, Spring-holder, Wrench, Stud-bolt, Screw etc… Hardware included.

This bridge features an artistic acanthus flower engraving that adds a custom look to Telecaster guitars. Designed for use with a Telecaster® single coil pickup, this bridge includes six adjustable chrome-plated brass saddles, and features a string-through design. The Gotoh Luxury-Mode series includes stylized parts made with an ultra fine, high-speed carving technology. These parts are replacements that can enhance the appearance of any guitar. Four mounting screws and a hex key for the saddle adjustments are included with this bridge plate.

The Gotoh® RES-O-LITE Series tuning machines are made to pre-CBS Fender® specs and mounting pattern. Their special lightweight alloy helps reduce headstock weight without sacrificing supreme tone. Vintage style set of 4 in line tuning machines. Reverse wind. Mounting hardware included.

Gotoh Stealth Keys are the smallest and lightest tuning keys in the world! They weigh in at only 11.9 grams (.026 lb) each! That's the equivalent of only 1/2 to 1/3 of the weight of most standard guitar machine heads. These machine heads let the instrument truly sing by allowing it to resonate to it's full potential and reduces the weight of your guitar significantly.

Gotoh 510T Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. The tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. Hardware included.

The Gotoh 510TS-FE1 tremolos are designed to withstand years of abuse and remain trouble free. This tremolo is precision machined and paired with steel saddles meant to last a lifetime. The patented FST tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. The 510TS-FE1 also uses Gotoh’s patented Stud Lock system for increased mounting stability. Hardware included.

Brass saddle version of the EV510T series tremolo bridge featuring Gotoh’s patented stud lock system and FST block. Gotoh 510T Series Tremolos are machined with Chrome Molybdenum Steel knife edges to withstand years of abuse and trouble free use. The tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. Studs, anchors, claw with screws, springs, arm, and hex keys for adjustments are all included with this tremolo. Gotoh's original FST feature (PAT.) is located between the saddle and ball end. The large channel keeps the strings from touching the plate. This feature improves the tremoloʼs ability to return to the tuned position after using the tremolo arm.

The Gotoh® RES-O-LITE Series tuning machines are made to pre-CBS Fender® specs and mounting pattern. Their special lightweight alloy helps reduce headstock weight without sacrificing supreme tone. Vintage style set of 4 in line tuning machines. Mounting hardware included.

If you are looking for a tremolo that is designed for enhanced sustain and better reliability, then you have found it. The VSVG Vintage tremolo features enlongated baseplate holes so the screws won't bind and it gives a very smooth, accurate return to pitch. With the string mounting holes being staggered in the steel block you will find much more tuning stability because of the more consistent string angle over the adjustable locking bent-steel saddles. Hardware included.

The Gotoh GE1996T is a high end locking tremolo licensed by Floyd Rose. This version of the locking tremolo is a premium option that is great for new installs or upgrading original units. The hardened steel saddles and patented stud lock technology ensure a rock solid performance. Springs, spring claw, and all mounting hardware are included along with two hex wrenches for dialing in adjustments. 40mm block.

Gotoh Stealth Keys are the smallest and lightest tuning keys in the world! They weigh in at only 11.9 grams (.026 lb) each! That's the equivalent of only 1/2 to 1/3 of the weight of most standard guitar machine heads. These machine heads let the instrument truly sing by allowing it to resonate to it's full potential and reduces the weight of your guitar significantly.

Direct Drop-in compact bass machine heads with threaded bushings for 9/16'' diameter peg holes. Gotoh's Res-O-Lite machine heads are extremely light weight (59.2 grams each) from aluminum alloy to make for a less neck heavy bass. Features a 26:1 Gear Ratio. 2+2 config, fits many Standard American and Mexican basses. Also the key post can be removed and replaced on opposing side.Comes in 2+2 configuration. Mounting hardware included.

These compact bass machine heads with threaded bushings for 9/16'' diameter peg holes. Gotoh's "Res-O-Lite" machine heads are extremely light weight, only 40 grams each, and made from aluminum alloy to make for a less heavy necked bass. Superior quality and precision made for even the most demanding players out there! Comes in 2+2 configuration and features a 20:1 Gear Ratio. Mounting hardware included.

Direct Drop-in compact bass machine heads with threaded bushings for 9/16'' diameter peg holes. Gotoh's Res-O-Lite machine heads are extremely light weight (59.2 grams each) from aluminum alloy to make for a less neck heavy bass. Features a 26:1 Gear Ratio. 4 In Line config, fits many Standard American and Mexican basses. Also the key post can be removed and replaced on opposing side.Come in 4 on a side. Mounting hardware included.

The SG510 series are recognized the world over as one of the top performing super tuners on the market. These feature an 18:1 gear ratio. They have evolved through improvement without any compromises along the way. The come equipped with a considerable amount of high-technology as a standard. With the improvement of precision fitting gears which give a marvelous touch on playing they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. These are three-on-a-side. Mounting hardware included.

A newly fashioned design from Gotoh® with almost no internal friction. Designed to directly retrofit the mounting hole pattern of a vintage tremolo. You can use this bridge to replace a conventional, 6 mounting screw Strat® tremolo with no mods to the body. Hardware included.

High quality tremolo featuring height-adjustable saddles that lock to a hardened steel baseplate. Threaded studs and bushings, springs, spring holder, allen wrenches and adjustable-tension arm are included. Looking for a great tremolo system for better tuning stability, string energy transfer and note sustain? Then you have found it right here. Hardware included.

SGS is the smaller model of SG510 series and use a 18:1 gear ratio. The SG510 series has evolved through improvement without compromise at any stage and come equipped with a considerable application of high-technology as standard. With the improvement of precision fitting gears, marvelous touch on playing—they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. Mounting hardware included.

The SGS is the smaller model of SG510 series. These high quality mini-tuners offer solid tuning stability and feature an 18:1 gear ratio. This 6-in-a-line set includes all necessary mounting hardware.

A unique modern Tune-o-matic style locking bridge. Mounts on Allen height-adjustable studs in threaded bushings. For solid body guitars. Hardware included.

Set of 6 tuners - 3 per side with round knob. 1:15 gear ratio. Hardware included.

A tremolo-unit includes the following accessories. Arm, spring, spring-holder, wrench, stud-bolt, screws. U.S.A. threads screws. String spacing:

• 56mm from low E string to high E string
• 11.2mm between each string

These compact bass machine heads with threaded bushings for 9/16'' diameter peg holes. Gotoh's "Res-O-Lite" machine heads are extremely light weight, only 40 grams each, and made from aluminum alloy to make for a less heavy necked bass. Superior quality and precision made for even the most demanding players out there! Come in 4 on a side and features a 20:1 Gear Ratio. Mounting hardware included.

A modern version of the Tune-o-matic style bridge for guitars. Pre-notched titanium saddles with an individual saddle intonation screw retained by mini hex nuts for each saddle. Threaded thumbwheel style studs and anchor bushings. Hardware included.