Guitar Parts & Pickups

Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

• Length = 1 41/64 inches (41.52mm)
• Height #1 (fretboard side) = 13/64 inches (5.06mm)
• Height #2 (headstock side) = 13/64 inches (5mm)
• Thickness at bottom = 9/64 inches (3.46mm)
• Thickness at top = 1/8 inches (3.1mm)

Fender® truss rod nuts for American strats. Adjustable using 1/8" hex wrench.

Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the hinge to the edge of the guitar body.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 2 magnet, bobbins, poll screws, slug screws, baseplate, and coil lead wires. These humbuckers feature two rows of adjustable polepiece, in bridge and neck position spacings. The neck pickup is warm and buttery, with a clear, present top end. The bridge pickup is fat and honky, with a rich low end and great clarity. Great choice for rock, rockabilly, blues, country and more!

• Resistance(Kohm) : 4.8K
• Magnet : Alnico 2 Bar

This kit builds one pickup.

Fender® replacement string ferrules for Original Tele (6 ferrules)

Gibson style top hat knob. 24 spline (for knurled split shaft pots).

Original Fender® replacement pickup cover for Strat, package of 3.

Original, made in USA, tele baseplate with vintage-correct specifications. This premium baseplate is made of raw steel.

Original, made in USA, covers for tele neck pickups. These premium tele covers are made of nickel silver.

Original, made in USA, covers for 1950s, vintage-style, tele neck pickups. These premium tele covers are made of nickel silver and feature the long skirt associated with ‘50s era pickups.

If you are looking for a tremolo that is designed for enhanced sustain and better reliability, then you have found it. The VSVG Vintage tremolo features enlongated baseplate holes so the screws won't bind and it gives a very smooth, accurate return to pitch. With the string mounting holes being staggered in the steel block you will find much more tuning stability because of the more consistent string angle over the adjustable locking bent-steel saddles. Hardware included.

The Gotoh Relic tele control plate is a convincingly aged part that is perfect for a vintage guitar or a relic'd guitar. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part. The various techniques used on these parts provide a relic'd look that appears genuine and not overdone. This plate fits 3/8" bushing pots such as the CTS R-VC-MA or Alpha R-V38-XA and is compatible with standard selector switches. Relic'd mounting screws are included.
For matching aged hardware, please check out the rest of the Gotoh Relic series:

• Dome Knobs - P-GGT-90
• Tele Bridge - P-GGT-85
• String Ferrules - P-GGT-87
• 6-in-a-line Tuners - P-GGT-81
• Strap Buttons - P-GGT-86-AC
• Neck Plate - P-GGT-89
• String Trees - P-GGT-92

Replacement pickguard for Fender® Standard Stratocaster models. These pickguards have eleven mounting holes and are cut for the classic strat configuration. Fits most American and Mexican Standard Stratocasters®. Features:

• 3-ply / 2.5mm thickness
• 11 mounting holes
• Shielding over electronics cavity
• Fits 3/8" bushing pots
• Various colors available

Chrome-plated steel bridge plate for use on American Vintage, Classic and Road Worn® series Telecaster® models.

• String-through-body three-saddle design
• Mounting hardware and bridge saddles not included

These super tuners are recognized as such around the world. The SG381 feature a 16:1 gear ratio and has evolved through improvement without compromise at any stage and come equipped with a considerable application of high-technology as standard. With the improvement of precision fitting gears, marvelous touch on playing---they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. These come with a metal keystone head and are perfect for your three-on-a-side setup. Mounting hardware included.

1:15 gear ratio. Hardware included.

Deluxe locking tuners used on most American Deluxe Strat® models. This staggered set may also be used as an upgrade to most Fender® instruments. Chrome. Set of 6

High quality press fit bushings for vintage style tuners. These bushings are plated in nickel. Sold individually.

• Inner Diameter: 0.240 in.
• Outer Diameter: 0.355 in.
• Height: 0.388 in.

Pickguards for Gibson® Les Paul® guitars with two humbucker pickups. Mounting bracket is sold separately. See P-GKLU-KLP1731C. See dimensional drawing below for size details.

Original, made in USA, humbucker frame with universal holes for multiple configurations. This premium baseplate has a 49.2mm spacing and is made of raw nickel silver.

Original, made in USA, covers for soap bar P-90 pickups. These premium P-90 covers are made of butyrate and have a 49.2mm spacing.

Aged nickel for guitar. String guides are also known as string trees or string retainers.
For matching aged hardware, please check out the rest of the Gotoh Relic series:

• Dome Knobs - P-GGT-90
• Tele Bridge - P-GGT-85
• String Ferrules - P-GGT-87
• 6-in-a-line Tuners - P-GGT-81
• Strap Buttons - P-GGT-86-AC
• Neck Plate - P-GGT-89
• Control Plate - P-GGT-91

U.S. made quality .781 in. (short) stoptail studs in standard threading. Five step plating process for extra durability This standard stop bar stud is made in steel for added strength and sustain and works with all US threaded bushings. Body Inserts sold separately.

The PQL-6011-00 is the perfect option to replace and upgrade the nut on your Gibson electric guitar made post-2014. It is slightly taller than the P-GNUT-TUSQ-EPS-3XL (pre 2015). When in doubt, use this one, you can always sand the bottom of the nut to adjust lower.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:

• Length - 1.725 in. (43.83mm)
• Width - 0.185 in. (4.69mm)
• Height - 0.405 in. (10.30mm)
• E to E - 1.408 in. (35.77mm)