1. Home
  2. Products
  3. Guitar Parts

Guitar Parts

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
products per page
P-GTSB03 Strap locks - Fender®, with button, set of 2
Go ahead and jump! You're protected by Fender® strap locks (2 pack)
$11.95
P-GTTJP-C Jack Plate - for Telecaster, Chrome
Replacement jack plate for Telecasters
$4.95
P-GTNN02 Nut blanks - Fender®, plastic, set of 2
Blank string nuts for Fender® guitars made of plastic
$4.95
P-GTNN10 Nut - Plastic, for Strat
Plastic strat guitar nut.
$1.95
Bulk Discounts Available!
On Backorder
P-GTSB05 Strap buttons - Fender®, for American standard, set of 2
Original Fender® American Standard Series strap buttons.
Package includes:
  • 2 strap buttons
  • 2 screws
$3.95
P-GTNN06-SLOT Nut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
$4.55
P-K332 Knobs - Fender®, Telecaster Chrome Dome, 2 Pieces
Original Fender knobs for the Tele. Chrome Dome. Package of two.
Fender part: 099-2056-000
$14.95
P-GTNN07 Nut - Bone, for Gibson, 43mm X 5.9mm X 8mm, Flat
Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.
$5.55
P-H162 Control plate - Fender®, for Vintage Telecaster, Chrome
Original Fender® replacement for vintage Tele guitar.
$13.50
S-H106 Screws - Fender®, Set Screws, for Knobs
Set screws for knobs. Package of 24.
Fits: US Tele/P-Bass chrome knobs and vintage-style.
$4.95
P-GTTS Screw - Fender®, Tuning Machine Mounting, Vintage
Fender® mounting screws for vintage style tuning machine heads. Package of 12.
$3.85
S-HSM4D7-20 Screw - M4 x 0.70, Phillips, Pan Head, Stainless Steel, Machine
(Package of 4)
(Metric Threading: M4 x 0.70) - 20 mm long
$0.80
S-MW-21-100 Wire - Magnet, 21 Gauge, 100 feet
Insulated with two coats of enamel. Perfect for winding coils or transformers. 21 Gauge, 100 foot spool. 105°C temperature rating, 600V.
$6.95
P-K338 Switch Tip - Fender®, Telecaster "Top Hat", Black
Tele "Top Hat" tip, black. Fender part: 099-4937-000
$8.70
S-MW-32-400 Wire - Magnet, 32 Gauge, 400 feet
Insulated with two coats of enamel. Perfect for winding coils or transformers. 32 gauge, 400 foot. 105°C temperature rating, 600V.
$7.95
P-GTNN04 Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Radiused
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm with radiused bottom.
$4.25
P-GTNN04-FLAT Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Flat
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.
$3.95
P-H164 Jack Plate - Fender®, for Stratocaster, Chrome
Original Fender® jack plate for Strat, chrome, includes screws.
$7.95
P-H516 Relay - Fender®, DPDT, 24V
Original Fender®, DPDT, 24V, used in Blues Deluxe®, Blues Deville®, Hot Rod Deluxe®, Hot Rod Deville®.
$2.95
S-S250X Guitar strings - Fender, Electric, Original 250s
Original Fender 250s: The "high-octane" nickel plated steel string for your electric guitar. With a pure steel wrap, the magnets in your pickups use the whole string, not just the core, and transform the energy into high output bursts of sound. The nickel plating enhances feel while reducing "string squeak" and fret wear without compromising tone. Combine the high output and dynamic sound of steel with the smooth feel of nickel; perfect for rock and other styles of music where the guitar needs to cut through. Original equipment on all U.S. made Fender® electric guitars. Ball End. Made in the USA Nickel Plated Steel Gauge Sets: .009 - .042 contains .009, .011, .016, .024, .032, .042 .011 - .049 contains .011, .014, .018, .028, .038, .049 .010 - .046 contains .010, .013, .017, .026, .036, .046
Starting at $5.10
P-GTNN08 Nut - Graphite, for Gibson
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 23/32 inches (43.75mm)
  • Height #1 (fretboard side) = 5/16 inches (7.81mm)
  • Height #2 (headstock side) = 9/32 inches (7mm)
  • Thickness at bottom = 15/64 inches (6.1mm)
  • Thickness at top = 3/16 inches (4.78mm)
$4.55
P-GTSG-TELE String guides - Fender®, for Telecaster
Fender® Telecaster string guide
$7.50
P-SW60 Switch - Pickup Selector, Tele, 3-Way, Black
3-way pickup selector switch for Teles, black tip.
$4.38
Save 14%
Originally: $5.10
P-GTARM01 Tremolo arm - Fender®, for American Stratocaster
Original Fender® Stratocaster tremolo arm (also known as "whammy bar")
$8.95
Don't see what you're looking for? Send us your product suggestions!