Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
P-GPS-3X Pickup Kit - Telecaster, Bridge or Neck
Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. These pickups use alnico 5 pole pieces to produce a warm, well rounded classic tone.
$14.36
Save 10%
Originally: $15.95
P-ECB-229 Knob - Dunlop, Jimi Hendrix Fuzz Face JH-F1
Genuine Dunlop replacement knob for Jimi Hendrix JH-F1 Fuzz Face. Knob is designed for use with solid/plastic 1/4” shafts and features set screw attachment. Two washers are included.
$2.03
Save 10%
Originally: $2.25
P-GB-SPRING-5X Tension Spring - Bigsby, Vibrato, 1 ⅛" long
Colors Available:
Genuine Bigsby® replacement spring for tremolo units. These springs are 1 1/8" (28.6mm) in length and are the longest springs available from Bigsby®. 1 1/8" springs are longer than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to raise the trem arm.
$7.65
Save 10%
Originally: $8.50
P-HP-TUBE Pickup Tubing - Original Fender®, rubber
Package of 12
Genuine Fender®. Package of 12 pieces of rubber tubing for pickup mounting on most Fender instruments with pickguard-mount pickups.
$4.31
Save 10%
Originally: $4.79
P-MR-1-X-A5 Magnet - Rod, Alnico 5, .187", Vintage Chamfer
Alnico 5 rod magnets with a .187” diameter. These magnets feature a vintage style chamfer and are not magnetized. Great for vintage Strat style pickups and many others.
Starting at $0.45
Save 10%
Originally: $0.50
P-GTSJP-X Jack Plate - replacement for Stratocaster
Colors Available:
New!:
Replacement jack plate for Stratocasters
Starting at $4.10
Save 10%
Originally: $4.55
P-GGT-25-X Tremolo - Wilkinson by Gotoh, VSVG, Vintage
Colors Available:
If you are looking for a tremolo that is designed for enhanced sustain and better reliability, then you have found it. The VSVG Vintage tremolo features enlongated baseplate holes so the screws won't bind and it gives a very smooth, accurate return to pitch. With the string mounting holes being staggered in the steel block you will find much more tuning stability because of the more consistent string angle over the adjustable locking bent-steel saddles. Hardware included.
Starting at $91.80
Save 10%
Originally: $102.00
P-COV-H50-U-X Cover - Humbucker, 50mm, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.
Starting at $5.35
Save 10%
Originally: $5.95
P-GB-SPRING-4X Tension Spring - Bigsby, Vibrato, ~\frac{11}{16}~" long
Colors Available:
Genuine Bigsby® replacement spring for tremolo units. These springs are 11/16" (17.5mm) in length and are the shortest springs available from Bigsby®. 11/16" springs are shorter than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to lower the trem arm.
Starting at $6.25
Save 10%
Originally: $6.95
S-H118 Screw - Fender®, Pickup Mounting, for P-Bass & J-Bass
Package of 12
4 x 1.25, package of 12.
$4.46
Save 10%
Originally: $4.95
S-W604X ZipWire - Jumper Cable Kit for circuits
Package of 120
The ZipWire™ Kit provides a convenient way to connect the signals in your projects. The wires can be unzipped for individual wires as needed and the color-coding can be used to organize power, ground and other signal types to keep your circuit organized. The rainbow colored ribbon cable provides the 10 standard electrical colors.
Starting at $8.55
Save 10%
Originally: $9.50
P-GKEDP-3801X Tuners - Kluson, Revolution G Mount, Pearloid knob, 3 per side
Package of 6
Colors Available:
The Kluson® Revolution G-Mount 19:1 high ratio tuning machines offer the traditional Kluson® footprint and a newly designed sealed die-cast, one-piece housing. High gear ratio guarantees silky smooth operation, fine tuning stability with no backlash. These state of the art tuning machines are designed to directly retrofit die-cast tuning machines that have a hex head (collared) bushing and a traditional Kluson® two-screw mounting pattern. Uses the common modern 25/64 in. (10mm) peghole. The G-Mount pattern makes these a great drop-in replacement for the modern “Gibson® Deluxe” collared tuning machines found on many models. No modification or unused holes!
  • All mounting hardware is included.
  • Precise 19:1 gear ratio for smooth operation
  • Sealed diecast,one piece housing
  • Traditional Kluson® two-screw mounting pattern with collared bushing.
  • Pearloid button
  • Available in Nickel or Gold
Starting at $50.40
Save 10%
Originally: $56.00
P-GTARM01 Tremolo arm - Fender®, for American Stratocaster
Original Fender® Stratocaster tremolo arm (also known as "whammy bar")
$8.96
Save 10%
Originally: $9.95
P-H166 Jack Plate - Electrosocket, for Tele, Anodized Aluminum
This modern cupstyle Tele® jackplate is milled from brass and has an shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
$9.68
Save 10%
Originally: $10.75
P-GGT-27-X Bridge - Gotoh, Vintage Style, for Bass Guitar, 4-String
Colors Available:
New!:
Direct replacement for most Fender P-Bass and Jazz Bass guitars. Superior high quality and precision made. This is for those who demand only the best for their Bass without breaking the bank. Mounting screws included.
Starting at $19.57
Save 10%
Originally: $21.75
P-GRV-205X6 Tuners - Grover, Mini Rotomatic, 6 in line
Package of 6
Colors Available:
Totally professional in design and performance. Small and lightweight, this precision machine fits guitar headpieces that will not take full size machines. The mini buttons provide more space for players' fingers (even larger fingers) to tune strings. Gear ratio is 14:1. Sealed-in lubrication keeps Mini-Rotomatics perfect for a lifetime! Includes ⅝" washers, bushings and wood screws.
Starting at $40.45
Save 10%
Originally: $44.95
P-GT-ARM-X Tremolo arm tip - Fender®, for capping tremolo arms
Package of 2
Colors Available:
Get better leverage and grip on your whammy bar by replacing the plastic tip, package of two.
Starting at $2.65
Save 10%
Originally: $2.95
P-GTKIT-X Accessory Kit - Fender®, for Stratocaster
Colors Available:
Fender Stratocaster accessory kit. Includes Volume & Tone knobs, tremolo arm tip, switch tip, tremolo back plate, and pickup covers
Starting at $12.55
Save 10%
Originally: $13.95
P-GTSG-AM String guides - Fender®, American series, chrome
Package of 2
Original Fender® string guide, American Series, chrome, package of two.
String guides are also known as string trees or string retainers.
$6.08
Save 10%
Originally: $6.75
P-GTF-N Ferrules - Fender®, for Original Telecaster, nickel, set of 6
Package of 6
Fender® replacement string ferrules for Original Tele (6 ferrules)
$7.43
Save 10%
Originally: $8.25
P-GT10X Bushings - Kluson, ¼" bushings, for retrofitting
Package of 6
Colors Available:
Adapter bushings to retrofit US 1/4 inch post Kluson tuners in a headstock drilled for modern die cast tuners. Nickel plating. Set of 6. These Kluson® steel replacement - adapter bushings are intended for use in converting a modern 10mm drilled headstock to accept a vintage Kluson stamped steel tuning machines with the original US 1/4 inch string post diameter. Many repair shops use these to convert a vintage instrument back to original peg head specs
Starting at $5.67
Save 10%
Originally: $6.30
P-GKLU-05X Tuner Knob - Kluson, Butterbean, Plastic, for tuners
Colors Available:
Replacement Butterbean (oval) press-on button for Kluson® tuning machines. Correct for vintage applications.
$1.89
Save 10%
Originally: $2.10
P-GTNN13 Nut - Fender®, Pre-slotted, Bone, for Tele and Strat
Original Fender pre-slotted bone nut for Teles and Strats.
$13.46
Save 10%
Originally: $14.95
P-GP-PLATE-2 Pickup Part - Base Plate, Tele Bridge, Steel, Copper Plated
Copper plated steel baseplate for building a Telecaster bridge pickup or repairing a vintage original.
  • .04” copper plated steel
  • 6-32 mounting screw thread
  • Sold individually
$2.79
Save 10%
Originally: $3.10
Don't see what you're looking for? Send us your product suggestions!