Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!

Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
P-GTARM03 Tremolo Arm - Fender®, Vintage '62 Jaguar / Jazzmaster
Original Fender® Tremolo arm for Vintage '62 Jaguar/Jazzmaster.
$14.65
P-GB-BRACKET-2X Bracket - Bigsby, Chet Atkins, top piece
Colors Available:

Genuine Bigsby® Chet Atkins bracket, top piece, for use with Bigsby vibrato units. Includes set screws for mounting the arm. Lower piece, fiberwasher, handle spring and nut sold separately. Pre-installed handle stud not included on gold version.

Starting at $12.95
P-GB-SADDLE-1P Saddle - Bigsby, Bridge, New, Polished
Genuine Bigsby® compensated bridge with a 2 13/16” stud spacing. This polished bridge has pre-slotted saddles and is compensated for a plain G string. This bridge was used on Gretsch 6120W models. Please check stud spacing for compatibility.
$12.95
P-GTARM02-X Tremolo arm - Fender®, for Vintage Stratocaster
Original Fender® Stratocaster tremolo arm (also known as "whammy bar") with tip. Metric M5 threading.
$11.95
P-GTARM01 Tremolo arm - Fender®, for American Stratocaster
Original Fender® Stratocaster tremolo arm (also known as "whammy bar")
$9.95
P-GGT-26-X Tremolo Arm - Wilkinson by Gotoh VS-100N
Colors Available:
Genuine replacement arm for the Wilkinson/Gotoh VS-100N Tremolo. Internally threaded, sturdy knobless .216"-diameter (5.5mm) stainless steel; extends approximately 5-⅝" (142.88mm). Sturdy VS-100N tremolo arm. Multiple color options available.
Starting at $9.00
P-GGT-70-C Tremolo Arm - Gotoh, B2, for GE101TS, chrome
Genuine Gotoh replacement tremolo arm for GE101TS
  • Chrome with black tip
  • #10-32 thread
$9.00
P-GB-SPRING-2X Tension Spring - Bigsby, Vibrato ⅞" long
Colors Available:
Genuine Bigsby® replacement spring for tremolo units. These springs are 7/8" (22.2mm) in length. 7/8" springs are the standard size included with most stock Bigsby® models.
Starting at $8.95
P-GB-ROLLER-S Roller - Bigsby, Stainless
Genuine Bigsby® replacement roller for use with vibrato units. This is the stock roller for B5, B7, and B12 vibratos.
$8.95
P-GVB-SB-GRIP Vibramate - Super Grip for Bigsby Trems
The Vibramate Super Grip is custom made specifically to fit the arm of your Bigsby vibrato. The textured design adds contour to the overall grip and a soft comfortable feel for subtle vibrato techniques. The Vibramate Super Grip easily slides onto your existing Bigsby vibrato arm without any modifications or special tools. The tapered design ensures a snug fit once installed but can be removed just as easily by sliding it back off. One size fits all - Vibramate Super Grip fits all Bigsby vibratos using the standard stock flat arm including Import and Left-Hand models. Made in USA.
$8.95
P-GVB-SF-GRIP Vibramate - Mini Grip for Floyd Rose Style Locking Tremolos
The Vibramate Mini Super Grip is custom made specifically to fit the arm of locking tremolo systems (like Floyd Rose). The textured design adds contour to the overall grip and a soft comfortable feel for subtle vibrato techniques. The Vibramate Super Grip easily slides onto your existing tremolo arm without any modifications or special tools. The tapered design ensures a snug fit once installed but can be removed just as easily by sliding it back off. Made in USA.
$8.95
P-GTSPRN-5 Tremolo Springs - Fender®, Tension, Package of 5
Package of 5
Set of five Stratocaster® tremolo tension springs for use on American Vintage series and Custom Shop instruments.
  • Set of five nickel-plated steel tremolo tension springs
  • For American Vintage series and Custom Shop instruments
$8.79
S-T220 Tremolo Stopper - Brass Block, Hex Screw, Allen Key
Brass tremolo stopper. Used as a floating bridge stop for Fender and Floyd Rose style tremolo systems. Prevents inadvertent vibrato effects produced by resting the picking hand over the bridge while playing. Allows for down-bends and prevents up-bends for a stabilized return of the whammy bar. Allen screw can be easily reversed to allow for a floating bridge setup again. Includes: (1) brass block (1.05" L x .39" W x .49" H) (1) allen key, 2 mm (1) allen screw (M4 x .70 thread, 20 mm length) (1) hex nut (M4 x .70 thread) (2) countersunk mounting screws (10 mm length)
$8.50
P-GB-SPRING-5X Tension Spring - Bigsby, Vibrato, 1 ⅛" long
Colors Available:
Genuine Bigsby® replacement spring for tremolo units. These springs are 1 1/8" (28.6mm) in length and are the longest springs available from Bigsby®. 1 1/8" springs are longer than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to raise the trem arm.
$8.50
P-GTAST-A Anchor - Fender®, for American standard tremolo, set of 2
Package of 2
Original Fender® anchors for American Standard Tremolo, set of 2.
$7.50
P-GB-SPRING-1X Tension Spring - Bigsby, Vibrato, 1" long
Colors Available:
Genuine Bigsby® replacement spring for tremolo units. These springs are 1" (25.4mm) in length. 1" springs are longer than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to raise the trem arm.
Starting at $6.95
P-GTARM0X Tremolo Arm - Fender®, Mexican Standard
Colors Available:
With white tip, for Mexican Standard Strat.
Starting at $6.95
P-GB-SPRING-4X Tension Spring - Bigsby, Vibrato, ~\frac{11}{16}~" long
Colors Available:
Genuine Bigsby® replacement spring for tremolo units. These springs are 11/16" (17.5mm) in length and are the shortest springs available from Bigsby®. 11/16" springs are shorter than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to lower the trem arm.
Starting at $6.95
P-GTFSPR-AM Tremolo Springs - Fender®, American Series
Package of 12
This spring helps set your tremolo arm in a fixed position when used with any Fender® American series or American Standard series tremolo. Simply insert spring into tremolo arm receptacle prior to installing tremolo arm. Package includes twelve tension springs. Used in Custom Shop, American Series, American Vintage, American Standard (USA), and Classic, Deluxe, and Road Worn® Series (Mexico) instruments.
$6.25
P-GB-BEARING-1 Bushing - Bigsby, Roller, Bronze
Genuine Bigsby® bronze roller bearing. Fits between P-GB-PIN-X and P-GB-ROLLER-S. These are the stock bearings used in B5, B7, and B12 vibratos.
$4.95
P-GTARMV01 Tremolo arm - for Vintage Stratocaster
Tremolo Arm, Screw-Down, Steel 5mm-0.8p
  • Material: Steel 5mm
  • Handle Type: Screw-down
  • Thread: M5.0 - 0.8p
  • Plating: Chrome
  • Tip: White
$4.50
P-GB-PIN-X Pin - Bigsby, Roller
Colors Available:
Genuine Bigsby® replacement roller pin. This roller pin is stock to the B5 and B7 vibrato units.
Starting at $4.25
P-GTAST-I Anchor Bushings - Fender® Bridge Pivot Screw Inserts
Package of 2
Original Fender® inserts for American Standard Tremolo, set of 2.
$3.95
On Backorder
P-GB-PIN-X2 Pin - Bigsby, Hinge
Colors Available:
Genuine Bigsby® replacement hinge pin for tremolo units. This hinge pin measures 1 13/16" from the base of the head to the end.
Starting at $3.95
Don't see what you're looking for? Send us your product suggestions!