Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!

Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
P-GB-BRACKET-1X Bracket - Bigsby, Chet Atkins, 2 pieces
Colors Available:
Genuine Bigsby® Chet Atkins bracket, two pieces connected, for use with Bigsby vibrato units. Includes all set screws required for attaching the arm to the bracket and the bracket to the vibrato. Arm sold separately.
Starting at $33.95
P-GB-HINGE-4G Hinge - Bigsby / Gretsch, Gold for B11 and B12
Genuine Bigsby® replacement hinge for use with B11 and B12 vibratos. Gold finish. Hinge pin sold separately.
$32.95
P-GB-SHIM Shim - Bigsby, 1953 Original Telecaster
Genuine Bigsby® aluminum neck shim for use with B16 or other vibratos. This item is a replica of the original 1953 Bigsby® neck shim made for Telecasters using the B16 vibrato. These shims are made of a lightweight aluminum and raise the neck 3/16" for a proper angle to work with the floating bridge. The shim is not drilled. Bigsby suggests using a 3/8" drill bit.
$26.95
P-GB-HANDLE-3X Handle - Bigsby, Chet Atkins, 7.5"
Colors Available:
Genuine Bigsby® Chet Atkins replacement vibrato arm. This 7.5" long version is the stock size used in the Chet Atkins arm assemblies.
Starting at $24.95
P-GB-SHAFT-1X Anchor Bar - Bigsby, String Mount
Colors Available:
Genuine Bigsby anchor bars for vibrato units. Anchor bars are also referred to as pivot bars and string shafts.
Starting at $24.75
P-GB-HINGE-5X Hinge - Bigsby, Conventional, B6 Style
Colors Available:
Bigsby long B6-style hinge plate.
Starting at $22.77
P-GB-HINGE-3 Hinge - Bigsby, Extra Short
Colors Available:
Genuine Bigsby® replacement hinge for vibrato units. This hinge is the stock hinge used on the B7 and B3.
      Starting at $21.95
      P-GGT-69-X Locking Nut - Gotoh, for Floyd Rose Style Tremolos, Top Mount
      Colors Available:
      Gotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount. Width: 1-11/16'' (43mm). Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.
      Starting at $21.75
      P-GTARM05 Tremolo Arm - Fender®, Deluxe Locking, Chrome
      Unthreaded pop-in, fits deluxe locking bridges.
      $18.95
      P-H163 Tremolo spring cover - Fender®, white pearloid
      Original Fender® tremolo spring cover, white pearloid.
      $18.65
      P-GB-HINGE-2X Hinge - Bigsby, for B700
      Colors Available:
      Genuine Bigsby® replacement hinge for vibrato units. This hinge is the stock hinge used on the B700.
      Starting at $17.50
      P-GB-BRACKET-3X Bracket - Bigsby, Chet Atkins, bottom piece
      Colors Available:
      Genuine Bigsby® Chet Atkins bracket, lower piece, for use with Bigsby vibrato units. Includes set screw for mounting to vibrato. Top piece, fiberwasher, handle spring and nut sold separately.
      Starting at $16.95
      P-GB-HINGE-1X Hinge - Bigsby, Gretsch, for vibrato
      Colors Available:
      Genuine Bigsby® replacement hinge for Gretsch by Bigbsy B3C and B6C vibratos.
      Starting at $15.95
      P-GB-SADDLE-2P Saddle - Bigsby, Bridge, Polished
      Genuine Bigsby® replacement bridge saddle. 2 13/16” stud spacing.
      $15.95
      P-GTARM03 Tremolo Arm - Fender®, Vintage '62 Jaguar / Jazzmaster
      Original Fender® Tremolo arm for Vintage '62 Jaguar/Jazzmaster.
      $14.65
      P-GB-BRACKET-2X Bracket - Bigsby, Chet Atkins, top piece
      Colors Available:

      Genuine Bigsby® Chet Atkins bracket, top piece, for use with Bigsby vibrato units. Includes set screws for mounting the arm. Lower piece, fiberwasher, handle spring and nut sold separately. Pre-installed handle stud not included on gold version.

      Starting at $12.95
      P-GB-SADDLE-1P Saddle - Bigsby, Bridge, New, Polished
      Genuine Bigsby® compensated bridge with a 2 13/16” stud spacing. This polished bridge has pre-slotted saddles and is compensated for a plain G string. This bridge was used on Gretsch 6120W models. Please check stud spacing for compatibility.
      $12.95
      P-GTARM02-X Tremolo arm - Fender®, for Vintage Stratocaster
      Original Fender® Stratocaster tremolo arm (also known as "whammy bar") with tip. Metric M5 threading.
      $11.95
      P-GTARM01 Tremolo arm - Fender®, for American Stratocaster
      Original Fender® Stratocaster tremolo arm (also known as "whammy bar")
      $9.95
      P-GGT-26-X Tremolo Arm - Wilkinson by Gotoh VS-100N
      Colors Available:
      Genuine replacement arm for the Wilkinson/Gotoh VS-100N Tremolo. Internally threaded, sturdy knobless .216"-diameter (5.5mm) stainless steel; extends approximately 5-⅝" (142.88mm). Sturdy VS-100N tremolo arm. Multiple color options available.
      Starting at $9.00
      P-GGT-70-C Tremolo Arm - Gotoh, B2, for GE101TS, chrome
      Genuine Gotoh replacement tremolo arm for GE101TS
      • Chrome with black tip
      • #10-32 thread
      $9.00
      P-GB-SPRING-2X Tension Spring - Bigsby, Vibrato ⅞" long
      Colors Available:
      Genuine Bigsby® replacement spring for tremolo units. These springs are 7/8" (22.2mm) in length. 7/8" springs are the standard size included with most stock Bigsby® models.
      Starting at $8.95
      P-GB-ROLLER-S Roller - Bigsby, Stainless
      Genuine Bigsby® replacement roller for use with vibrato units. This is the stock roller for B5, B7, and B12 vibratos.
      $8.95
      P-GVB-SB-GRIP Vibramate - Super Grip for Bigsby Trems
      The Vibramate Super Grip is custom made specifically to fit the arm of your Bigsby vibrato. The textured design adds contour to the overall grip and a soft comfortable feel for subtle vibrato techniques. The Vibramate Super Grip easily slides onto your existing Bigsby vibrato arm without any modifications or special tools. The tapered design ensures a snug fit once installed but can be removed just as easily by sliding it back off. One size fits all - Vibramate Super Grip fits all Bigsby vibratos using the standard stock flat arm including Import and Left-Hand models. Made in USA.
      $8.95
      Don't see what you're looking for? Send us your product suggestions!