Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
P-GP-COV-2C Pickup Cover - for Telecaster, Chrome
Standard chrome cover for telecaster rhythm/neck position pickup.
  • Chrome plated
  • Overall measurements: 65.1mm/2.56” Length x 15.9mm/.62” Width
  • Sold individually
$5.95
P-GRV-WASHERS Washers - Grover, Replacement For Tuner Knobs, Set
Full set of replacement washers for Grover tuners. These are the washers that are between the arm of the tuner and the tuner’s knob. All three washers are used on a single tuner. Includes 6 nylon washers, 6 spring washers, and 6 flat washers.
$5.95
package of 6
P-GGT-90 Knob - Gotoh, VK1-19 Relic, Dome, aged chrome
Set screw. Designed to replicate an "aged" look.
$5.80
P-GTNN07 Nut - Bone, for Gibson, 43mm X 5.9mm X 8mm, Flat
Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.
$5.55
P-GTNN02 Nut blanks - Fender®, melamine, set of 2
Set of two Fender® high-quality melamine (simulated bone) string nuts with 9.5" radius, for use with most Fender instruments
$5.55
package of 2
S-H136 Screws - Gretsch®, Bezel Mount, Chrome
Genuine Gretsch® screws for mounting Gretsch pickup rings to the guitar's body. These chrome oval-head wood screws come in a pack of 12.
Accessory to P-PUGRETMR-S
$5.49
P-H166 Jack Plate - Electrosocket, for Tele, chrome plated brass
This modern cupstyle Tele® jackplate is milled from brass and has a shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!
$5.45
P-GTS-NUT-A Truss Rod Nuts - Fender®, for American Strat
Fender® truss rod nuts for use on American Standard, American Deluxe and some Custom Shop guitars, this 1/8" American Standard truss rod nut helps keep electric guitar and bass necks straight and true. Adjustable using 1/8" hex wrench.
$5.45
P-GKLU-KLP1731C Pickguard bracket - Les Paul, Brass Chrome
This pickguard mounting bracket is a direct replacement for contemporary Gibson® Les Paul® guitars. It is USA made component with high quality plating to the standards you would expect for your guitar. Slight differences include the adjustment slot having rounded ends instead of the original square cut slot and a slight difference in width from the historic version. Mounting hardware is not included.
$5.40
P-GTFW-STEEL-X Fret Wire - Stainless Steel, 2 ft lengths, various sizes
High quality stainless steel fret wire available in popular sizes.
Straight 2ft lengths sold individually or discounted by the pound.
Per pound quantities


SKU
Qty
Price


P-GTFW-STEEL-1
32
PRICE


P-GTFW-STEEL-3
22
PRICE


For standard 18% Nickel-Silver options please see:
  • Small Sizes - P-GTFW-S-X
  • Medium Sizes - P-GTFW-M-X
  • Jumbo Sizes - P-GTFW-J-X



SKU
Crown Width
Crown Height
Total Height
Tang Width
Stud Width
Additional Info


P-GTFW-STEEL-1
2.0 mm (0.079")
1.0 mm (0.039")
2.8 mm (0.110")
0.6 mm (0.024")
0.95 mm (0.037")
Similar size to Dunlop 6260, Stew Mac 147, commonly used on Vintage Fender, Banjos, Pre-War Gibsons


P-GTFW-STEEL-3
2.7 mm (0.106")
1.4 mm (0.055")
3.2 mm (0.126")
0.6 mm (0.024")
0.95 mm (0.037&qu
Starting at $6.35
Partially Out of Stock
S-H106 Screws - Fender®, Set Screws, for Knobs
Set screws for knobs. Package of 24. Fits: U.S. Telecaster / P-Bass chrome knobs and vintage-style knobs. Fender part number: 099-4922-000
$5.15
package of 24
S-H118 Screw - Fender®, Pickup Mounting, for P-Bass & J-Bass
4 x 1.25, package of 12. For a variety of vintage and contemporary Precision and Jazz Bass models
$5.15
package of 12
P-GTTJP-C Jack Plate - for Telecaster, Chrome
Replacement jack plate for Telecasters
$5.10
P-GTSB04-X Strap Buttons / Pins - Fender®, vintage
Fender® vintage strap buttons. Designed to fit most Fender instruments. All mounting hardware included.
Starting at $4.95
package of 2
P-HP-TUBE Pickup Tubing - Original Fender®, rubber
Genuine Fender®. Package of 12 pieces of rubber tubing for pickup mounting on most Fender instruments with pickguard-mount pickups.
$4.95
package of 12
S-H119 Screws - Fender®, Saddle Height Screws
Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.
  • Set of 12 hex set screws
  • For American Vintage Stratocaster and Telecaster guitars
  • Comes with four 4-40 x 3/8" hex screws and eight 4-40 x 5/16" hex screws.
$4.95
package of 12
On Backorder
P-GTNN04 Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Radiused
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm with radiused bottom.
$4.95
P-B-THUMB Thumb rest - Fender®, for P-Bass and J-Bass, black
Original Fender® black thumb rest replacement for Precision and Jazz Bass. Mounting hardware included.
$4.95
P-GTARMV01 Tremolo arm - for Vintage Stratocaster
Tremolo Arm, Screw-Down, Steel 5mm-0.8p
  • Material: Steel 5mm
  • Handle Type: Screw-down
  • Vintage Thread: M5.0 - 0.8p
  • Plating: Chrome
  • Tip: White
$4.95
P-GTFW-J-X Fret Wire - 18% Nickel-Silver, 2 ft lengths, Jumbo sizes
High quality 18% Nickel-Silver fret wire in jumbo sizes.
  • 2.6mm - 3.0mm Crown Widths, (0.102" - 0.118")
  • 1.0mm - 1.45mm Crown Heights, (0.039" - 0.057")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-J-1 28 PRICE P-GTFW-J-2 26 PRICE P-GTFW-J-3 25 PRICE P-GTFW-J-4 22 PRICE P-GTFW-J-5 18 PRICE P-GTFW-J-6 21 PRICE P-GTFW-J-7 19 PRICE For additional sizes and options please see:
  • Small Sizes - P-GTFW-S-X
  • Medium Sizes - P-GTFW-M-X
  • Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-J-1 2.6 mm (0.102") 1.0 mm (0.039"
Starting at $4.95
Partially Out of Stock
P-GB-BEARING-1 Bushing - Bigsby, Roller, Bronze, for B5, B7, B12
Genuine Bigsby® bronze roller bearing. Fits between P-GB-PIN-X and P-GB-ROLLER-S. These are the stock bearings used in B5, B7, and B12 vibratos.
$4.95
P-GTSJP-X Jack Plate - replacement for Stratocaster
Colors Available:
Replacement jack plate for Stratocasters
Starting at $4.79
P-GTFW-M-X Fret Wire - 18% Nickel-Silver, 2 ft lengths, Medium sizes
High quality 18% Nickel-Silver fret wire in medium sizes.
  • 2.3mm - 2.4mm Crown Widths, (0.091" - 0.095")
  • 1.1mm - 1.3mm Crown Heights, (0.043" - 0.051")

Straight 2ft lengths sold individually or by the pound. For additional sizes and options please see:
  • Small Sizes - P-GTFW-S-X
  • Jumbo Sizes - P-GTFW-J-X
  • Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-M-1 2.3 mm (0.091") 1.1 mm (0.043") 2.6 mm (0.102") 0.65 mm (0.026") 0.95 mm (0.037") A popular medium size for electric guitars P-GTFW-M-2 2.4 mm (0.095") 1.2 mm (0.047") 2.8 mm (0.110") 0.60 mm (0.024") 0.95 mm (0.037") A popular tall and narrow style, similar size to Stew Mac 141 P-GTFW-M-3
Starting at $5.95
Partially Out of Stock
P-K368X Knob Cap - Fender, S-1 Switch, Strat
Colors Available:
Genuine Fender replacement knob cap for S-1 switch, which can be retrofitted to nearly any U.S.- and Mexico-made Stratocaster manufactured from 1954-present.
Direct Replacement for P-K358X
$4.75
Don't see what you're looking for? Send us your product suggestions!