Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
P-GB-HANDLE-9X Handle - Bigsby, narrow vintage assembly
Colors Available:
Genuine Bigsby® narrow vintage handle assembly for use with Bigsby vibrato units. This unit attaches to vibratos using the included set screw.
Starting at $71.95
P-GV500-B Adaptor Kit - Vibramate, V500B Standard Kit, black
Fits SKU# P-GB500-X Now you can install a Bigsby Vibrato on your guitar without drilling any holes!
$70.95
P-GB-HANDLE-5X Handle - Bigsby, Duane Eddy handle assembly
Colors Available:
Genuine Bigsby® Duane Eddy handle assembly. This unit attaches to vibratos using the included set screw.
Starting at $59.95
P-GB-HANDLE-2X Handle - Bigsby, Chet Atkins complete assembly
Colors Available:
Genuine Bigsby® Chet Atkins complete handle assembly for use with Bigsby vibrato units. This assembly attaches to vibratos using the included set screw.
Starting at $58.75
P-GV5-X Adapter Kit - Vibramate, V5 Standard Mounting
Colors Available:
Vibramate Standard V5 Adapter Mounting Kit, For Bigsby B5, Aluminum Now you can install a Bigsby Vibrato on your guitar without drilling any holes!
Starting at $57.95
P-GV5-ST-X Vibramate - V5-ST Short Tail, For Bigsby B5
Colors Available:
Vibramate Short Tail V5 Adapter Mounting Kit, For Bigsby B5 The Vibramate V5 Short Tail Mounting Kit is the same as the Original V5 kit but designed for tighter locations such as the SG Classic style guitars that feature a larger pickguard. The Vibramate V5 is for mounting a Bigsby B5 Original Vibrato and will fit most traditional style guitars that have a tune-a-matic style bridge and a stop-tailpiece. The kit installs in minutes with the included hardware and eliminates the need for drilling permanent holes in your instrument. Vibramate comes with 3 felt-pads secured to the bottom of the mounting plate for a soft touch to the top of your guitar.
Starting at $57.95
P-GV7-LP-X Adapter Kit - Vibramate, Standard Carved Top Les Paul
Colors Available:
Vibramate V7-LP Les Paul Adapter Mounting Kit, For Bigsby B7 - Now you can install a Bigsby Vibrato on your carved top Les Paul® guitar without drilling any holes!
Starting at $54.95
P-GHP-6X Intonation System - Hollow Point, 6 String
Package of 6
Colors Available:
Hollow Point® Intonation System for Double Locking Tremolos. For 6 string guitar. The Hollow Point® Intonation System is designed for use with most Floyd Rose® style/licensed and Ibanez® Edge double locking tremolos where the fine tuner makes direct contact with the string lock screw. Multiple color options available.
Starting at $54.95
P-GV5-JAM-X Vibramate - V5 JAM Mounting, For Jazzmaster and Jaguar
Colors Available:
Now you can install a Bigsby B5 Vibrato on your Jazz Master or Jaguar guitar without drilling any holes! The Vibramate V5-JAM Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most Standard Jazz Master or Jaguar guitars with Stock Vibrato Bridge. The Vibramate automatically positions the Bigsby Vibrato in the proper orientation and makes a very clean finished appearance with great performance. The Vibramate V5-JAM kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing plate wood screws. The kit installs in minutes and eliminates the need for drilling, soldering or removing the neck. The Vibramate V5-JAM is available in Polished Stainless Steel, White Powder Coat, Black Powder Coat or 24K Gold Plating to accent your guitar the way you want! * Note: Vibramate V5 is designed for the Bigsby "Original" B5 Vibrato ONLY and will not work with other variations such as the "Licensed" B50 Model or the Import B500 Model.
Starting at $53.95
P-GB-HANDLE-6X Handle - Bigsby, flat handle assembly
Colors Available:
Genuine Bigsby® flat handle assembly for use with Bigsby vibrato units. The is the stock handle assembly to the Kalamazoo series vibratos. This unit attaches to vibratos using the included set screw.
Starting at $49.95
P-GB-BRIDGE-1X Bridge - Bigsby, bridge assembly for guitar
Colors Available:
Genuine Bigsby® bridge assembly for use with Bigsby vibrato units.
Starting at $47.50
P-GB-BRACKET-4X Bracket - Bigsby, Chet Atkins, Stationary
Colors Available:
Genuine Bigsby® Chet Atkins fixed handle bracket for use with Bigsby vibrato units. This bracket sets the handle into a fixed position whereas the P-GB-BRACKET-1X versions offer a pivoting arm. Arm sold separately.
Starting at $45.54
P-GB-BRIDGE-6 Bridge - Bigsby, Telecaster new style
Genuine Bigsby® new style Telecaster bridge for use with Bigsby vibratos. This bridge assembly is an alternative bridge with notched saddles for the B16 vibratos.
$45.54
P-GB-HANDLE-1X Vibrato Handle - Bigsby, Flat with Stud
Colors Available:
Genuine Bigsby® replacement flat handle with pre-installed stud. This flat handle is the stock handle used on most Kalamazoo Series vibratos.
Starting at $45.50
P-GB-HANDLE-8X Handle - Bigsby, flat 9 ½" handle with stud
Colors Available:
Genuine Bigsby® replacement flat handle with pre-installed stud. This 9.5" flat handle is longer than the stock handle used on most Kalamazoo Series vibratos.
Starting at $44.95
P-GVB-TE-BS Bridge Saddles - Vibramate, Dual Access
Package of 3
Colors Available:

Vibramate V5-TE Slotted Bridge Saddle Set for Telecaster Guitars are designed to work with the Vibramate V5-TE Series Mounting kits and Bigsby vibratos. Each set is custom-slotted utilizing the traditional 3-saddle "ash-tray" configuration and are designed to properly align the strings with the guitar neck of a Telecaster Guitar. The vintage style saddles are made in the USA and feature all Stainless Steel mounting screws and compression springs.

Starting at $44.95
P-GTREMSETTER Tremsetter - Hipshot, automatic tremolo return
The Tremsetter greatly improves guitar performance by automatically returning your full floating tremolo to an exact "zero" neutral position, eliminating flutter and sag, so your guitar remains in tune. You can bend strings, play bridge harmonics, aggressive rhythm parts or mute strings and the bridge remains stable. Best of all, the Trem-Setter is total retro-fit. No need to chop up your vintage axe, just install it and play! Includes mounting instructions.
$37.95
P-GB-HANDLE-4X Vibrato Arm - Bigsby, Chet Atkins, 10"
Colors Available:
Genuine Bigsby® Chet Atkins replacement vibrato arm. This 10" long version is longer than the stock size used in the Chet Atkins arm assemblies.
Starting at $36.95
P-GVSR1-X Spoiler String Retainer - Vibramate
Colors Available:
Vibramate String Spoiler For Bigsby Vibratos The Vibramate String Spoiler is an ingenious little bracket designed to fit right onto your existing Bigsby vibrato without any modifications or special tools. It easily slips right into place and is held in position by the tension of the strings when tuned to pitch. The Spoiler makes string changes so easy you'll wonder how you ever lived without it. No more need for wrapping the strings around and under the vibrato roller with needle-nose pliers in an attempt to get the ball onto that little pin. Multiple color options available.
Starting at $36.25
P-GB-PLATE Bridge Plate - Bigsby, for Telecaster Guitar
Genuine Bigsby® Telecaster® plate for use with B5 vibratos. Standard Telecasters will require modifications for use with this plate. Five mounting wood screws included. Bridge sold seperately.
$34.45
On Backorder
P-GB-BRACKET-1X Bracket - Bigsby, Chet Atkins, 2 pieces
Colors Available:
Genuine Bigsby® Chet Atkins bracket, two pieces connected, for use with Bigsby vibrato units. Includes all set screws required for attaching the arm to the bracket and the bracket to the vibrato. Arm sold separately.
Starting at $33.95
P-GB-HINGE-4G Hinge - Bigsby / Gretsch, Gold for B11 and B12
Genuine Bigsby® replacement hinge for use with B11 and B12 vibratos. Gold finish. Hinge pin sold separately.
$32.95
P-GB-SHIM Shim - Bigsby, 1953 Original Telecaster
Genuine Bigsby® aluminum neck shim for use with B16 or other vibratos. This item is a replica of the original 1953 Bigsby® neck shim made for Telecasters using the B16 vibrato. These shims are made of a lightweight aluminum and raise the neck 3/16" for a proper angle to work with the floating bridge. The shim is not drilled. Bigsby suggests using a 3/8" drill bit.
$26.95
P-GB-HANDLE-3X Vibrato Arm - Bigsby, Chet Atkins, 7.5"
Colors Available:
Genuine Bigsby® Chet Atkins replacement vibrato arm. This 7.5" long version is the stock size used in the Chet Atkins arm assemblies.
Starting at $24.95
Don't see what you're looking for? Send us your product suggestions!