Guitar Parts & Pickups

Gold anodized aluminum P-Bass style pickguard with 13 mounting holes. This pickguard is routed for a standard P-Bass style pickup and wiring configuration. All mounting holes are countersunk.

Any sore shouldered bassist can tell you that fighting "neck dive" from a poorly balanced instrument is akin to slow torture. Our Ultralite® bass tuning machines are designed and manufactured to lighten up the load while improving ruggedness and accuracy. Spend more time on stage, not at the chiropractor.

Vibramate String Spoiler For Bigsby Vibratos The Vibramate String Spoiler is an ingenious little bracket designed to fit right onto your existing Bigsby vibrato without any modifications or special tools. It easily slips right into place and is held in position by the tension of the strings when tuned to pitch. The Spoiler makes string changes so easy you'll wonder how you ever lived without it. No more need for wrapping the strings around and under the vibrato roller with needle-nose pliers in an attempt to get the ball onto that little pin. Multiple color options available.

Vintage-style chrome bridge assembly for use on most Standard, Deluxe, Roadhouse™, Lone Star™, and Blacktop Stratocaster models manufactured from 2006-present. Includes six bent "Fender"-stamped saddles, intonation screws and springs, and saddle-height adjustment screws. Mounting hardware, tremolo claw, tremolo springs and tremolo arm not included.

• 2-1/16" mounting spacing*
• Standard 10/32 tremolo arm threading
• For a variety of Stratocaster models (2006-present)

*Note that 2-1/16" bridge mounting spacing means that bridge-mounting screws will not fit vintage or vintage reissue instrument unless modified to do so.

Replace your sloppy, worn out tuning machines with a set of Hipshot American Classics. The HB2 is a direct replacement for the Schaller® BMF tuner that was first found on CBS era Fender® basses manufactured between 1967 and 1982. Since then, the BMF tuner has been featured on countless boutique builds and Custom Shop models.

Switchcraft 3 Position Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® P-SW01. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. Features a slightly longer (3/8”) bushing ideal for thicker topped guitars.

• Tip not included. See W-SC-W0X
• Black finish

Genuine Bigsby® replacement hinge for use with B11 and B12 vibratos. Gold finish. Hinge pin sold separately.

Switchcraft 3 Position Pickup Selector, replacement for Gibson L-Type. Similar to Gibson®. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG.

• Tip not included. See W-SC-W0X (Note: Two threads will show beneath the switch cap.)
• Nickel Finish

Genuine Bigsby® replacement hinge for Gretsch by Bigbsy B3C and B6C vibratos.

Made in U.S. Vintage spec ABR-1 bridge. Non-wired. Hardware included.
ABR-1 bridge with nylon saddles. True to specs like the original with no retaining wire. The saddles are held in place with a combination of string tension and the intonation screw end fitting into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!

Vintage style stamped tuning machine set with white plastic oval buttons. These nickel finished tuners look great on vintage and Gibson style guitars. The gear ratio is 15:1. All mounting hardware is included in this three per side tuner set.

The Gotoh Relic GE104B bridge is a convincingly aged part that is perfect for a vintage or relic'd guitar. Parts from the Gotoh Relic series are uniquely worn for an aged look that offers the functionality of a new part. The various techniques used on these parts provide a relic'd look that appears genuine and not overdone. This bridge features zinc saddles, a 52mm string spacing, a 400mm radius, and 74mm stud spacing. M4 threaded mounting posts and thumb screws are included.

Any sore shouldered bassist can tell you that fighting "neck dive" from a poorly balanced instrument is akin to slow torture. Our Ultralite® bass tuning machines are designed and manufactured to lighten up the load while improving ruggedness and accuracy. Spend more time on the bass-not at the chiropractor.

Original Fender® pickguard replacement, 3-ply, for American Precision Bass. This pickguard fits American, American Standard, American Vintage, Standard and Deluxe series Precision Bass models (does not fit five-string Precision models).

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 2 magnet, bobbins, poll screws, slug screws, baseplate, and coil lead wires. These humbuckers feature two rows of adjustable polepiece, in bridge and neck position spacings. The neck pickup is warm and buttery, with a clear, present top end. The bridge pickup is fat and honky, with a rich low end and great clarity. Great choice for rock, rockabilly, blues, country and more!

• Resistance(Kohm) : 4.8K
• Magnet : Alnico 2 Bar

This kit builds one pickup.

The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.

Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired. Hardware included.
The bridge features the vintage-style retaining wire that secures the brass saddles and intonation screws onto the bridge. The spacing and mounting hardware also match the original spec of this bridge with threaded posts that mount directly to the body and thumbwheels for height adjustments.

This aluminum height adjustable stop tailpiece from GOTOH features threaded adjustable studs and knurled bushings. Hardware included. Anchor bushings: M8x1.25, 25mm height.

Genuine Bigsby® compensated bridge with a 2 13/16” stud spacing. This polished bridge has pre-slotted saddles and is compensated for a plain G string. This bridge was used on Gretsch 6120W models. Please check stud spacing for compatibility.

Set of three compensated brass bridge saddles for use on vintage-style three-saddle Telecaster bridges (does not fit standard six-saddle Telecaster bridges).
Set includes saddles, intonation springs, slotted intonation screws and saddle-height adjustment screws.
Features:

• Set of three compensated brass bridge saddles
• For vintage-style three-saddle Telecaster bridge assemblies

Vintage style stamped tuning machine set with solid metal oval buttons mounted on a plate. These nickel finished tuners look great on vintage and Fender® style guitars. The gear ratio is 15:1. All mounting hardware is included in this six on a plate tuner set.

Vintage style stamped tuning machine set with solid metal oval buttons. These nickel finished tuners look great on vintage and Fender® style guitars. The gear ratio is 15:1. All mounting hardware is included in this six in a line tuner set.

U.S. made and true to vintage 1950s specifications. This lightweight (35 grams) wraparound bridge is made of aluminum to match the original 1950s version. High quality plating is used on all options. Each side is adjustable using the included hex set screws to dial in the intonation. Mounting studs sold separately. For a full set with all hardware included, please see P-GKLU-KLP1127N.

• 3.22 in. (82mm) stud spacing

Genuine Bigsby® narrow, stationary handle for use with Bigsby vibrato units. This 50s style fixed arm is a single piece and does not swivel.