Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
P-G105 Backplate - Strat style 3-ply, black
Three-ply black/white/black Stratocaster style back plate with 6 mounting holes.
$4.95
P-GTTJP-C Jack Plate - for Telecaster, Chrome
Replacement jack plate for Telecasters
$5.10
P-G107-BWB Pickguard - For '57 Strat®, 8 Hole, 3-Ply
Replacement pickguard for Fender® '57 Strat® models. These three-ply pickguards have eight mounting holes. Fits most American, Japanese, and Mexican '57 Stratocasters®.
Features:
  • 3-ply / 2.5mm thickness
  • 8 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
$10.25
On Backorder
P-G109-X Pickguard - for American Deluxe Strat®, HSS, 11 Hole, 3-Ply
Colors Available:
Replacement pickguard for Fender® American Deluxe Strat models. These pickguards have eleven mounting holes and feature cutouts for two single coil pickups and a humbucker in the bridge position. The humbucker cutout has rounded corners for a flush fit with uncovered pickups. Fits most American Deluxe Stratocasters® that are routed for a humbucker bridge pickup.
Features:
  • 3-ply / 2.5mm thickness
  • 11 mounting holes
  • Shielding over electronics cavity
  • Fits 3/8" bushing pots
  • Various colors available
$11.30
P-G103 Pickguard - P-Bass, 3-Ply, Black / White / Black
Three-ply black/white/black P-Bass style pickguard with 13 mounting holes. This pickguard is routed for a standard P-Bass style pickup and wiring configuration.
$10.25
P-H708 Control Plate - Jaguar Style, Selector Switch, Chrome
Jaguar style selector switch plate in chrome. Perfect replacement for most Jaguar style guitars. This version features the stock three switch configuration originally used for selecting pickups and engaging the mid-tone cut.
$5.95
P-G104-X Pickguard - For '62 Strat®, 11 Hole, 3-Ply
Colors Available:
New!:
Replacement pickguard for Fender® '62 Strat® models. These pickguards have eleven mounting holes with one of the holes centered between the middle and neck pickups for compatibility with most American, Japanese, and Mexican '62 Stratocasters®.
Starting at $10.25
P-G108-AW Pickguard - for Tele, 5 Hole, Single Ply
Replacement pickguard for Telecaster guitars. These pickguards feature five mounting holes. Cut from a thicker single ply sheet, these pickguards offer a vintage style with added rigidity.
$10.25
P-GTFW6230 Fret wire - Dunlop, pre-cut, medium, for early Fender®
Package of 24
Dunlop Accu-Fret® fretwire is manufactured from a durable nickel/silver alloy and delivers a warm and clear tone-the preferred brand for guitar builders and repairmen worldwide. Good on early Fenders®.
$13.95
P-GTNN06 Nut - Graphite, for Fender, blank unslotted
This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.
  • Length = 2 1/64 inches (51.25mm)
  • Height = 11/64 inches (4.55mm)
  • Thickness = 1/8 inch (3.1mm)
$4.55
P-NECK-T-30 Neck - for Telecaster Guitar, Maple, Headstock Adjust
Replacement Telecaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 inch radius maple fingerboard. The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Telecaster®. Nut not included. Fender Licensed replacement neck.
$125.95
On Backorder
P-NECK-S-01 Neck - for Stratocaster Guitar, Maple, Headstock Adjust
Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius maple fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. Nut not included. Fender Licensed replacement neck.
$135.00
P-NECK-S-03 Neck - for Stratocaster Guitar, Rosewood
Replacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius rosewood fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. Nut not included. Fender Licensed replacement neck. Heel width is 2 3/16".
$135.00
On Backorder
P-BH-XK-2C Tuner - Hipshot, BT2 Bass Xtender, nickel
Retrofit your USA '67-'82 Fender P & J Bass for drop tuning! Also retrofits Geddy Lee, reissue '67-'82 Fender. Fits 11/16 in. headstock holes. Installation instructions and mounting hardware included.
$71.50
On Backorder
P-G106H-BWB Pickguard - For Standard Strat®, HSS, 11 Hole, 3-Ply
These pickguards have eleven mounting holes and feature cutouts for two single coil pickups and a humbucker in the bridge position. Fits most American and Mexican Standard Stratocasters® that are routed for a humbucker bridge pickup.
$10.25
P-BH-A-4BC Bridge - Hipshot, 4-string Type A Bass, brass and chrome
Retrofits your Fender five hole mount bridge on your 4 string bass using the two outer holes and the center hole. The type A saddles feature variable string spacing adjustment for even greater versatility and fine intonation adjustment as well. 4 String Bass Bridge. Type A Fender Mount (3 Mounting Holes). Non-string-through.
$100.00
P-NECK-T-32 Neck - for Telecaster Guitar, Rosewood
Replacement Telecaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius rosewood fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Telecaster®. Nut not included. Fender Licensed replacement neck.
$135.00
On Backorder
Don't see what you're looking for? Send us your product suggestions!