A new look is coming for Amplified Parts! Click here to find out about the coming changes!

You are here

Guitar Parts

Guitars can lead a rough life and replacement parts can bring your axe to like new condition.  But did you know that you can also change components to achieve different sounds? The options are endless!

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(3 pages)
P-GKLU-KLP1141XTailpiece - Kluson, Lightweight Aluminum, Steel Studs
Colors Available:

U.S. made state of the art stoptail. Available in zinc, aluminum, bell brass and steel. A five step plating process for unmatched quality. True vintage shape and specs, not a reproduction of an aftermarket product that so many try to achieve. Steel studs included. Introducing the new Kluson® vintage aluminum stop-bar tailpiece! Designed for your instrument requiring a stop-bar tailpiece to accompany a separately mounted bridge. This is a super high-quality tailpiece that is very hard to distinguish from the originals of the 50s and 60s and best of all ... it’s made in America! The plating process is a 5 step process which is every bit as comparable to what you would find on blue ribbon winning show cars and made from high grade aluminum. This gives you the same added string definition and note articulation the vintage guys crave and was also used by some of the greatest usa guitar manufacturers from the golden era of guitar building!


Starting at $23.95
Click to read more
P-GT10XBushings - Kluson, ¼" bushings, set of 6
Colors Available:
Adapter bushings to retrofit US 1/4 inch post Kluson tuners in a headstock drilled for modern die cast tuners. Nickel plating. Set of 6.
These Kluson® steel replacement - adapter bushings are intended for use in converting a modern 10mm drilled headstock to accept a vintage Kluson stamped steel tuning machines with the original US 1/4 inch string post diameter. Many repair shops use these to convert a vintage instrument back to original peg head specs.
  • Outside diameter: 9.98mm
  • Inside diameter: 1/4 inch (about 6.35mm)
Starting at $6.30
Click to read more
P-GKLUSD9005MNPTuner - Kluson, plastic, 3 per side, nickel/white

Kluson Plastic Button Tuners, 3 Per Side, Nickel/White (Type SD9005MNP) Complete set with both bass and treble side individual tuning machines. Includes bushings and mounting screws. Historically correct replacement for many ‘50s and ‘60s Gibson®, Martin®, Kay®, Epiphone®, Guild®, Rickenbacker® and ‘60s through ‘80s Mosrite® guitars. Used on Gibson® ES-330, Epiphone Casino


$42.00
Click to read more
P-GKLU-KLP1273NBridge - Kluson, ABR-1, Nonwired Nylon Saddles, Nickel

Made in U.S. Vintage spec ABR-1 bridge. Non-wired. Hardware included. This is the Kluson ABR-1 bridge with nylon saddles. True to specs like the original with no retaining wire. The saddles are held in place with a combination of string tension and the intonation screw end fitting into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!


$26.12
Click to read more
P-GKLU-KLP128XBridge - Kluson, ABR-1, Wired, Raw Brass Saddles
Colors Available:

Made in U.S. Vintage spec ABR-1 bridge. Wired. Hardware included. This is the Kluson ABR-1 bridge with the retaining wire and raw brass saddles for great tone transfer. True to original mounting specs. The saddles are held in place with a thin wire securing the intonation screws and saddles into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!


Starting at $25.60
Click to read more
P-GKLU-WD90NPPTuner - Kluson, plastic, 3 on plate, nickel

Kluson Plastic Button Tuners, 3 On Plate, Nickel (Type WD90NPP) Complete set includes both bass and treble side tuning machines on a plate. Includes bushings and mounting screws. Historically correct replacement for many Gibson®, Kay® and Epiphone® guitars.. Used on Les Paul Jr / SG Junior


$42.00
Click to read more
P-GKLU-KLTP-XTailpiece - Kluson, Trapeze
Colors Available:

This is the recreation of the popular Kluson® #9 tailpiece. This particular model tailpiece was preferred for many vintage era arch-top guitar builds and is still one of the best choices available today. Fits large archtop instruments with a rim thickness of 2-7/8 in. or more. Machined brass. Overall length: 5 in. Crossbar: 3-1/4 in. String spread at crossbar: 2-3/16 in.


Starting at $37.07
Click to read more
P-GKLU-SD9005MNTuner - Kluson, Oval, 3 per side, Nickel

Kluson Oval Metal Button Tuners, 3 Per Side Complete set with both bass and treble side individual tuning machines. Includes bushings and mounting screws. Historically correct replacement for many ‘50s and ‘60s Gibson®, Martin®, Kay®, Epiphone®, Guild®, Rickenbacker® and ‘60s through ‘80s Mosrite® guitars. Used on Gibson® ES-330, Epiphone Casino


$42.00
Click to read more
P-GKLU-SD90SLXTuning machine - Kluson, 3 per side, with pearloid keystone
Colors Available:

Kluson Pearloid Button Tuners, 3 Per Side, Pearl Complete set with both bass and treble side individual tuning machines. Includes bushings and mounting screws. Historically correct replacement for many '50s and '60s Gibson®, Martin® and Epiphone® guitars. Used on a Les Paul / SG Standard


Starting at $41.00
Click to read more
P-GKLU-SD9105MXTuning machine - Kluson, 6 in line, Traditional with oval button
Colors Available:
This Kluson® 6-in-line tuning machine set has oval metal (butter bean-shaped) buttons and the improved 15:1 gear ratio for more stable and accurate tuning. The housing and button style are period correct for 1965 - 1969 production dates. These feature the Kluson® Safety Post. This set comes complete with 6 bass side tuners, 8.8mm O.D. vintage bushings with 1/4 inch inner diameter and mounting screws needed for installation.
Starting at $42.00
Click to read more

Pages

(3 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Guitar Parts