Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
S-HS632-X Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.65
package of 5
S-HS440-X Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.59
package of 5
S-H105 Screw - 1", Phillips, Oval Head, Matching T-Nut
1" Oval head, Phillips screw with matching M4 threaded t-nut. (package of 4)
$1.99
package of 4
S-HS832-X Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$1.15
package of 5
P-PGA1-X Screws - Fender®, for fastening pick guards
Original Fender pickguard screws. Set of 24 Phillips head screws (4x1/2") for pickguard and control plate mounting on most Fender instruments.
Starting at $4.25
package of 24
S-HS1032-X Screw - 10-32, Phillips, Pan Head, Machine, Zinc, fine thread
Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $1.15
package of 5
S-H107 Screw - Fender®, for Pickups and Switches
Original Fender 6-32 screws for use on pickups and switches.
$4.45
package of 12
P-GTNP-SCREWS Screw - Fender®, for Neck Mounting
Genuine Fender® neck mounting screws. These neck mounting screws are chrome plated and are the standard screws included on most Fender® screws, Includes a full set of four Phillips screws.
$4.25
package of 4
S-HST8-X Screw - #8, Phillips, Pan Head, Self-Tapping, Zinc
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
Starting at $0.72
package of 5
P-GTTS Screw - Fender®, Tuning Machine Mounting, Vintage
Fender® mounting screws for vintage style tuning machine heads. Package of 12.
$3.95
package of 12
S-H251 Piggyback Hardware - Fender, Thumb Screws
Thumb screws for piggyback amplifier, used for locking amp heads to cabs. Original Fender.
$11.95
package of 2
S-H131 Screws - Original Fender, Vintage Style Strat Bridge Mounting
Genuine Fender® vintage-style Strat bridge mounting screws. Some of Fender’s most requested replacement screws. Made for Fender® and used on a variety of vintage and contemporary models.
  • Set of 12 replacement screws
  • Genuine vintage specifications
  • Nickel plating
  • Phillips oval-head (#6 x 1 1/8")
  • Used on American Vintage Stratocaster® guitars
$3.25
package of 12
S-HS1032-1F Screw - 10-32, Phillips, Flat Head, Machine, stainless steel
Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.
$2.45
package of 5
S-H106 Screws - Fender®, Set Screws, for Knobs
Set screws for knobs. Package of 24. Fits: U.S. Telecaster / P-Bass chrome knobs and vintage-style knobs. Fender part number: 099-4922-000
$5.15
package of 24
S-HS1032-1F-SET Hardware - Fender, Screws & T-Nuts for Handle
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
$4.10
package of 5
S-H103 Screw - #4 x ½", Oval Head, Sheet Metal, Black Oxide
Black screws for attaching logos and other lightweight items. #4 x 1/2" sheet metal/wood screws, oval head, black oxide finish. Package of 25.
$3.00
package of 25
S-H104 Screw - #2 x ⅜, Phillips, Oval Head, SMS, Zinc
#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.
$4.00
package of 25
P-H249 Clip Nut - for ~\frac{8}{32}~" thread, machine screws
Clip nut for 8/32" thread. For use with machine screws
$0.75
Save 6%
Originally: $0.80
package of 4
P-GB-SCREW-4 Screw - Bigsby, for Mounting Bridge Plates
Genuine Bigsby® mounting screws. These wood screws are for mounting bridge plates to the top of the guitar body. These are the stock screws included with plates like P-GB-PLATE.
$2.25
Don't see what you're looking for? Send us your product suggestions!