Guitar Parts & Pickups

Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.

Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.

Original Fender pickguard screws. Package of 24.

(Metric Threading: M4 x 0.70) - 20 mm long

Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.

Clip nut for 8/32" thread. For use with P-H248 Machine screws

Set screws for knobs. Package of 24. Fits: U.S. Telecaster / P-Bass chrome knobs and vintage-style knobs. Fender part number: 099-4922-000

Thumb screws. Package of two. Fender part number: 099-0720-000

Genuine Fender® vintage-style Strat bridge mounting screws. Some of Fender’s most requested replacement screws. Made for Fender® and used on a variety of vintage and contemporary models.

• Set of 12 replacement screws
• Genuine vintage specifications
• Nickel plating
• Phillips oval-head (6-32 x 7/16")
• Used on American Vintage Stratocaster® guitars

Screws for pickups and switches.

Fender® neck mounting screws (4 pack)

Fender® mounting screws for vintage style tuning machine heads. Package of 12.

Genuine Bigsby® mounting screws. These are the same screws that come stock with many Bigsby® vibrato units. These wood screws are for mounting the hinge to the edge of the guitar body.

Set of 13 phillips head screws for Leslies. Includes 13 flat washers. 13 pieces replaces all of the screws on the upper cover, lower cover and middle back panel.

Genuine Bigsby® replacement handle stud.

This is the perfect screw assortment for those vintage applications requiring slot head screws. The additional discount purchasing as a kit makes it an unbeatable value.

A must for anyone out there with Pre-CBS Fender® guitars and basses. Look no further. You can finally replace those old rusty, stripped out screws with correct new ones that look and are just like the originals. We went to special efforts to have these rare and unusual screws made for use specially, so you can keep that vintage Fender® in primo condition. This assortment contains 595 pieces and comes with a traditional, free, pre-labeled cabinet for easy access and reordering. This Kit contains:

• 100 Bass/Tele saddle height nickel screws
• 150 Long Strat saddle height nickel screws
• 75 Vintage Bass nickel intonation screws
• 75 Short Strat saddle height nickel screws
• 120 Vintage tremelo intonation nickel screws
• 75 Vintage Tele intonation nickel screws

Black screws for attaching logos and other lightweight items. #4 x 1/2" sheet metal/wood screws, oval head, black oxide finish. Package of 25.

#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.

1" Oval head, Phillips screw with matching t-nut. (package of 4)

Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.

Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.