Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!

Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
S-HS440-X Screw - 4-40, Phillips, Pan Head, Machine
Package of 5
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.35
S-HS832-X Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.50
S-HST8-X Screw - #8, Phillips, Pan Head, Self-Tapping, Zinc
Package of 5
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but not necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.50
S-HS1032-X Screw - 10-32, Phillips, Pan Head, Machine, Zinc, fine thread
Package of 5
Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.75
P-PGA1-X Screws - Fender®, for fastening pick guards
Package of 24
Original Fender pickguard screws. Package of 24.
Starting at $3.95
S-HSM4D7-20 Screw - M4 x 0.70, Phillips, Pan Head, Stainless Steel, Machine
Package of 4
(Metric Threading: M4 x 0.70) - 20 mm long
$0.80
S-HS1032-1F-SET Hardware - Fender, Screws & T-Nuts for Handle
Package of 5
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
$3.00
S-H251 Screw - Fender®, Thumb screws, Piggyback
Package of 2
Thumb screws. Package of two. Fender part number: 099-0720-000
$11.95
P-H249 Clip Nut - 8/32
Package of 4
Clip nut for 8/32" thread. For use with P-H248 Machine screws
$0.80
S-H106 Screws - Fender®, Set Screws, for Knobs
Package of 24
Set screws for knobs. Package of 24. Fits: U.S. Telecaster / P-Bass chrome knobs and vintage-style knobs.
Fender part number: 099-4922-000
$4.95
P-GTNP-SCREWS Screw - Fender®, Neck Mounting
Package of 4
Fender® neck mounting screws (4 pack)
$3.95
S-H107-X Screw - Fender®, for Pickups and Switches
Package of 12
Screws for pickups and switches.
Starting at $4.25
P-GB-SCREW-1X Screw - Bigsby, Regular #125, Hinge
Colors Available:
Bigsby hinge screw, regular. Stainless steel
Bigsby part: 0495-1923
Bigsby Part No: 0495-1923G
Starting at $1.95
P-GTTS Screw - Fender®, Tuning Machine Mounting, Vintage
Package of 12
Fender® mounting screws for vintage style tuning machine heads. Package of 12.
$3.85
P-GCOV-2 Bridge cover - Fender®, for Vintage Telecaster, Chrome
Original Fender® bridge for vintage Tele, chrome.
$14.95
P-GCOV-6 Bridge Cover - Fender®, for Vintage J-Bass, Chrome
Original Fender® bridge cover for vintage J-Bass.
$17.95
S-H131 Screws - Original Fender, Vintage Style Strat Bridge Mounting
Package of 12
Genuine Fender® vintage-style Strat bridge mounting screws. Some of Fender’s most requested replacement screws. Made for Fender® and used on a variety of vintage and contemporary models.
  • Set of 12 replacement screws
  • Genuine vintage specifications
  • Nickel plating
  • Phillips oval-head (6-32 x 7/16")
  • Used on American Vintage Stratocaster® guitars
$3.95
P-GCOV-4 Bridge Cover - Fender®, '51 P-Bass / Tele Bass, Chrome
Original Fender® bridge cover for '51 P Bass/Tele Bass, chrome.
$14.65
P-GTFW01 Fret wire - Fender®, for Standard Guitar, Set of 24
Package of 24
Fender® replacement pre-cut standard fret wire (24 pieces)
$9.25
P-GTFW02 Fret wire - Fender®, for vintage guitar
Package of 24
Fender® replacement pre-cut vintage fret wire
$8.95
P-OH-510 Screw Set - Leslie, Back Panel, 13 Phillips Screws, Washers
Package of 13
Set of 13 phillips head screws for Leslies. Includes 13 flat washers. 13 pieces replaces all of the screws on the upper cover, lower cover and middle back panel.
$9.95
P-GTFW6130 Fret wire - Dunlop, large, for early Gibson
Package of 24
Dunlop®, 6130,.036" x.106", 28% nickel/silver, hard alloy, 2 5/8" long, large/jumbo size, good on early Gibson®, 24 pieces
$13.50
P-GB-STUD-1 Handle Stud - Bigsby, Stainless
Bigsby handle stud. Stainless steel
Bigsby part: 0495-1980
$3.95
P-GTFW6230 Fret wire - Dunlop, medium, for early Fender®
Package of 24
Dunlop Accu-Fret® fretwire is manufactured from a durable nickel/silver alloy and delivers a warm and clear tone-the preferred brand for guitar builders and repairmen worldwide. Good on early Fenders®.
$13.75
Don't see what you're looking for? Send us your product suggestions!