Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
P-GGT-23-X Bridge - Gotoh, Tune-O-Matic, Studs / Bushings Post
Colors Available:
New!:
A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Threaded thumbwheel style studs and bushings and features hard zinc saddles. Hardware included.
Starting at $20.25
Save 10%
Originally: $22.50
P-GT10X Bushings - Kluson, ¼" bushings, for retrofitting
Package of 6
Colors Available:
Adapter bushings to retrofit US 1/4 inch post Kluson tuners in a headstock drilled for modern die cast tuners. Nickel plating. Set of 6. These Kluson® steel replacement - adapter bushings are intended for use in converting a modern 10mm drilled headstock to accept a vintage Kluson stamped steel tuning machines with the original US 1/4 inch string post diameter. Many repair shops use these to convert a vintage instrument back to original peg head specs
Starting at $5.67
Save 10%
Originally: $6.30
P-GKLU-MBCF65N Tuner Bushings - for New Fender®, Nickel
Package of 6
Replacement bushings for Fender® headstocks. Contemporary - 10.5mm outside diameter and 6.35mm inside diameter. These are the correct adapter bushings for contemporary Fender necks that are bored out to slightly larger modern specs. These work as reducer bushings to enable you to install a vintage Kluson tuner on a modern headstock from Fender without having to plug and redrill the pegholes.
$5.66
Save 10%
Originally: $6.29
P-GKLU-KLP11X Anchor Bushings - Kluson, USA Thread
Package of 2
High quality Kluson USA® zinc anchor bushings available in long or short lengths with a coarse or fine knurl for a variety of stop tailpiece uses. These bushings fit 5/16 – 24 US Threaded studs. Studs sold separately.
Starting at $0.85
Save 11%
Originally: $0.95
P-GTFW6130 Fret wire - Dunlop, pre-cut, large, for early Gibson
Package of 24
Dunlop®, 6130,.036" x.106", 28% nickel/silver, hard alloy, 2 5/8" long, large/jumbo size, good on early Gibson®, 24 pieces
$12.15
Save 10%
Originally: $13.50
P-GTFW01 Fret wire - Fender®, pre-cut, for Standard Guitar
Package of 24
Fender® replacement pre-cut standard fret wire (24 pieces)
$8.33
Save 10%
Originally: $9.25
P-GTBSH-VB Bushings - Fender®, for vintage bass tuning key, nickel
Package of 4
Original Fender® vintage bass tuning key bushings. Fits American Vintage, Classic and Road Worn Series, Power Jazz Bass, and Carbonate Series bass guitars.
$6.26
Save 10%
Originally: $6.95
On Backorder
P-GTFW02 Fret wire - Fender®, pre-cut, for vintage guitar
Package of 24
Fender® replacement pre-cut vintage fret wire
$8.06
Save 10%
Originally: $8.95
P-GVB-SPB-X Adaptor Kit - Vibramate, Strap Button / Pin Bushing Kit
Colors Available:
The Vibramate Strap Button/Pin Bushing is designed and custom manufactured in the United States for use specifically with Bigsby "Original" B7 or B3 vibratos where a spacer is desired through the Bigsby Hinge Plate for use with your Strap Button or Strap-Lock. Custom machined from high quality aluminum the Vibramate Strap Pin Bushing is designed for both clearance through the Hinge Plate slot for your Strap Button as well as providing additional clamping pressure to the tail of the guitar. Multiple color options available.
Starting at $8.06
Save 10%
Originally: $8.95
P-GKLU-MBG65X Tuner Bushings - for Gibson® headstocks
Package of 6
Colors Available:
Replacement bushings for Gibson® headstocks with 8.85mm outside diameter and 6.35mm inside diameter These Kluson® replacement push-in bushings are designed to appear like current Gibson® production with the more rounded flange. Same mounting specs as the bushings that accompany the current Kluson® production tuning machines so they will easily replace similar bushings with the same spec requirements
Starting at $5.66
Save 10%
Originally: $6.29
P-GTBSH-V Bushings - Fender®, for vintage tuning key, nickel
Package of 6
Genuine Fender® tuning key bushings. Made for Fender® and used on a variety of vintage and contemporary models. Press-in bushings for vintage-style tuning keys.
$5.85
Save 10%
Originally: $6.50
P-GTFW6230 Fret wire - Dunlop, pre-cut, medium, for early Fender®
Package of 24
Dunlop Accu-Fret® fretwire is manufactured from a durable nickel/silver alloy and delivers a warm and clear tone-the preferred brand for guitar builders and repairmen worldwide. Good on early Fenders®.
$12.38
Save 10%
Originally: $13.75
P-GTFW-S-X Fret Wire - 18% Nickel-Silver, 2 ft lengths, Small sizes
High quality 18% Nickel-Silver fret wire in small sizes.
  • 2mm - 2.1mm Crown Widths, (0.079" - 0.083")
  • 0.9mm - 1.3mm Crown Heights, (0.035" - 0.051")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-S-1 38 PRICE P-GTFW-S-2 31 PRICE P-GTFW-S-3 32 PRICE P-GTFW-S-4 26 PRICE P-GTFW-S-5 35 PRICE For additional sizes and options please see:
  • Medium Sizes - P-GTFW-M-X
  • Jumbo Sizes - P-GTFW-J-X
  • Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-S-1 2.0 mm (0.079") 0.9 mm (0.035") 2.5 mm (0.098") 0.5 mm (0.020") 0.83 mm (0.033")
Starting at $4.05
Save 10%
Originally: $4.50
P-GTFW-M-X Fret Wire - 18% Nickel-Silver, 2 ft lengths, Medium sizes
High quality 18% Nickel-Silver fret wire in medium sizes.
  • 2.3mm - 2.4mm Crown Widths, (0.091" - 0.095")
  • 1.1mm - 1.3mm Crown Heights, (0.043" - 0.051")

Straight 2ft lengths sold individually or by the pound. For additional sizes and options please see:
  • Small Sizes - P-GTFW-S-X
  • Jumbo Sizes - P-GTFW-J-X
  • Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-M-1 2.3 mm (0.091") 1.1 mm (0.043") 2.6 mm (0.102") 0.65 mm (0.026") 0.95 mm (0.037") A popular medium size for electric guitars P-GTFW-M-2 2.4 mm (0.095") 1.2 mm (0.047") 2.8 mm (0.110") 0.60 mm (0.024") 0.95 mm (0.037") A popular tall and narrow style, similar size to Stew Mac 141 P-GTFW-M-3
Starting at $4.27
Save 10%
Originally: $4.75
P-GTFW-J-X Fret Wire - 18% Nickel-Silver, 2 ft lengths, Jumbo sizes
High quality 18% Nickel-Silver fret wire in jumbo sizes.
  • 2.6mm - 3.0mm Crown Widths, (0.102" - 0.118")
  • 1.0mm - 1.45mm Crown Heights, (0.039" - 0.057")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-J-1 28 PRICE P-GTFW-J-2 26 PRICE P-GTFW-J-3 25 PRICE P-GTFW-J-4 22 PRICE P-GTFW-J-5 18 PRICE P-GTFW-J-6 21 PRICE P-GTFW-J-7 19 PRICE For additional sizes and options please see:
  • Small Sizes - P-GTFW-S-X
  • Medium Sizes - P-GTFW-M-X
  • Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-J-1 2.6 mm (0.102") 1.0 mm (0.039"
Starting at $4.45
Save 10%
Originally: $4.95
P-GTFW-STEEL-X Fret Wire - Stainless Steel, 2 ft lengths, various sizes
High quality stainless steel fret wire available in popular sizes. Straight 2ft lengths sold individually or by the pound. For standard 18% Nickel-Silver options please see:
  • Small Sizes - P-GTFW-S-X
  • Medium Sizes - P-GTFW-M-X
  • Jumbo Sizes - P-GTFW-J-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-STEEL-1 2.0 mm (0.079") 1.0 mm (0.039") 2.8 mm (0.110") 0.6 mm (0.024") 0.95 mm (0.037") Similar size to Dunlop 6260, Stew Mac 147, commonly used on Vintage Fender, Banjos, Pre-War Gibsons P-GTFW-STEEL-2 2.4 mm (0.095") 1.2 mm (0.047") 2.8 mm (0.110") 0.6 mm (0.024") 0.95 mm (0.037") A popular tall and narrow style, similar size to Stew Mac 141 P-GTFW-STEEL-3 2.7 mm (0.106") 1.4 mm (0.055") 3.2 mm (0.126")
Starting at $4.73
Save 10%
Originally: $5.25
P-GKLU-KAB110M Anchor Bushings - Kluson, Metric Thread, Zinc, Set of 2
Pair of standard stop bar anchor bushings for stud mounts with fine knurling and fits most guitars using a 0.986” body depth for the anchors. Made from zinc. Pairs with P-GKLU-KLP1099X studs. Studs sold separately.
$2.03
Save 10%
Originally: $2.25
P-GT-GP200 Parts Kit - Grover, Bushings, Washers, Screws
Package of 564
Bushings, washers and screws for Grover® Machine Heads.
$157.50
Save 10%
Originally: $175.00
P-GGT-115-X Ferrules - Gotoh, TLB-2 press fit, for Bass
Package of 6
Colors Available:
The Gotoh TLB-2 is a high quality set of bass string ferrules. These press fit ferrules are a great choice for Fender® basses or any bass with a string through bridge. Includes four ferrules.
Starting at $3.41
Save 10%
Originally: $3.79
Don't see what you're looking for? Send us your product suggestions!