Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!

Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
S-H103 Screw - #4 x ½", Oval Head, Sheet Metal, Black Oxide
Package of 25
Black screws for attaching logos and other lightweight items. #4 x 1/2" sheet metal/wood screws, oval head, black oxide finish. Package of 25.
$3.00
S-HS1032-1F Screw - 10-32, Phillips, Flat Head, Machine, stainless steel
Package of 5
Phillips flathead machine screw, 10-32 stainless steel. Fine thread. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. This style head is used in applications where protrusion of the fastener above the mating surface is unacceptable. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. Made from austenitic stainless steels. It contains chromium creating an invisible surface film that resists oxidation making the metal corrosion resistant. If the surface layer is damaged, it rebuilds itself in the presence of oxygen.
$1.50
S-H105 Screw - 1", Phillips, Pan Head, Matching T-Nut
Package of 4
1" panhead, Phillips screw with matching t-nut. (package of 4)
$1.40
S-H104 Screw - #2 x ⅜, Phillips, Oval Head, SMS, Zinc
Package of 25
#2 x 3/8", zinc, oval head, phillips, sms screws. Package of 25.
$3.00
Save 25%
Originally: $4.00
S-HS1032-X Screw - 10-32, Phillips, Pan Head, Machine, Zinc, fine thread
Package of 5
Phillips panhead machine screw, 10-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.75
S-HS440-X Screw - 4-40, Phillips, Pan Head, Machine
Package of 5
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.35
S-HS632-X Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.40
P-GTNP-4C-FND Neck Plate - Fender®, 4-Bolt 70s "F" Style, Chrome
"F" Style 4 bolt neck plate as used on 1970s Fender® guitars
$10.25
S-HST8-X Screw - #8, Phillips, Pan Head, Self-Tapping, Zinc
Package of 5
Self tapping Phillips panhead machine screw #8, zinc type AB. Type AB screws tap their own mating internal thread. They require a preformed hole for installation into metallic materials but necessary for wood or plastic materials. Combines locating point of Type A with thread size and pitch of Type B. Normal limitations of Type B apply. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Provides good control in driving and is the most recommended drive.
$0.50
P-PGA1-X Screws - Fender®, for fastening pick guards
Package of 24
Original Fender pickguard screws. Package of 24.
Starting at $3.95
S-HS1032-1F-SET Hardware - Fender, Screws & T-Nuts for Handle
Package of 5
Screw - Machine, Phillips Flat Head, 10-32 x 1 in., Stainless, package of 5
Nut - T-Nut, Zinc, 10-32, package of 5
Hardware only. Amp handle not included.
$3.00
P-GTNP-4C-FND-2 Neck Plate - Fender®, for American Standard Guitar, Chrome
Original Fender® neckplate for American Standard guitar, 4 bolt with truss rod hole, chrome.
$11.95
S-HS832-X Screw - 8-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 8-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.50
S-H251 Screw - Fender®, Thumb, Piggyback, Package of 2
Package of 2
Thumb screws. Package of two.
$11.95
P-GTNP-SCREWS Screw - Fender®, Neck Mounting
Package of 4
Fender® neck mounting screws (4 pack)
$3.95
P-GB-SCREW-1X Screw - Bigsby, Regular #125, Hinge
Colors Available:
Bigsby hinge screw, regular. Stainless steel
Bigsby part: 0495-1923
Bigsby Part No: 0495-1923G
Starting at $1.95
P-GGT-89 Neck Plate - Gotoh, Relic, Aged Chrome
Screws included.
$9.95
P-H249 Clip Nut - 8/32
Package of 4
Clip nut for 8/32" thread. For use with P-H248 Machine screws
$0.80
P-GTNP4-C Neck Plate - 4-Hole, Chrome
Replacement chrome 4 bolt neck plate. 4 screws included.
$4.50
S-H106 Screws - Fender®, Set Screws, for Knobs
Package of 24
Set screws for knobs. Package of 24.
Fits: US Tele/P-Bass chrome knobs and vintage-style.
$4.95
P-GTTS Screw - Fender®, Tuning Machine Mounting, Vintage
Package of 12
Fender® mounting screws for vintage style tuning machine heads. Package of 12.
$3.85
S-HSM4D7-20 Screw - M4 x 0.70, Phillips, Pan Head, Stainless Steel, Machine
Package of 4
(Metric Threading: M4 x 0.70) - 20 mm long
$0.80
P-GTNP-3C-FND Neck Plate - Fender®, Chrome 3-Bolt 70s "F" Style
"F" Style 3 bolt neck plate as used on 1970s Fender® guitars
$9.50
P-GTNP-4C-FND-3 Neck Plate - Fender®, for American Standard Bass, Chrome
Original Fender® neck plate for American bass, 4 bolt, chrome.
$11.00
Don't see what you're looking for? Send us your product suggestions!