Guitar Parts

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!

Guitar Parts

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
R-VPMT-VT Circuit - PMT, Variable Treble Bleed
Precision Music Technologies V-Treb – Variable Treble Bleed Bypass Circuit. Made in USA. The V-Treb variable treble bleed/bypass circuit corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. PCB dimentions: 1.06” x 0.46” x 0.07”
$8.78
Save 10%
Originally: $9.75
K-704 Upgrade Kit - For Fender®, Mid Boost Preamp for Strats
This kit includes all of the parts needed to upgrade your guitar with the Mid Boost Pream used on the Buddy Guy and Eric Clapton Strats. Includes PCB ASSY Clapton preamp, Control 50K audio, Control 350K special taper, washer, jack output OPN stereo surge, TBX tone control and schematic wiring diagram.
$45.90
Save 10%
Originally: $51.00
R-VPMT-DMT Potentiometer - PMT, Dual Mode Tone Control, ⅜" Shaft/Bushing
Precision Music Technologies DMT Control – Dual Mode High Pass & Low Pass Tone Control. Made in USA. The DMT Tone Control is a passive dual mode tone filter than can operate in either high pass or low pass modes. This greatly expands the utility of the instruments controls vs. a traditional tone control. A frequency selector switch for each mode further adds to the DMT Controls versatility. Push-pull pot: 500KA, 16 mm body diameter, ¼” knurled split shaft. Bushing diameter = 3/8”, Bushing Length = 3/8”. PCB dimentions: 1.06” x 0.70” x 0.07”
$17.55
Save 10%
Originally: $19.50
R-VPMT-DMTL Potentiometer - PMT, Dual Mode Tone Control, ¾" Shaft/Bushing
Precision Music Technologies DMT Control – Dual Mode High Pass & Low Pass Tone Control. Made in USA. The DMT Tone Control is a passive dual mode tone filter than can operate in either high pass or low pass modes. This greatly expands the utility of the instruments controls vs. a traditional tone control. A frequency selector switch for each mode further adds to the DMT Controls versatility. Push-pull pot: 500KA, 16 mm body diameter, ¼” knurled split shaft. Bushing diameter = 3/8”, Bushing Length = 3/4”. PCB dimentions: 1.06” x 0.70” x 0.07”
$22.50
Save 10%
Originally: $25.00
R-VPMT-HCP Potentiometer - PMT, Humbucker Control, Coil Filters
Precision Music Technologies HCP Control – Humbucker Control Pot w/ Coil Filter Modes. Made in USA. The HCP Humbucker Control Pot is a passive dual mode coil selector that eliminates the additional switches associated with coil splitting a pair of humbuckers which greatly simplifies operation. Push-pull pot: 500KA, 16 mm body diameter, ¼” knurled split shaft. Bushing diameter = 3/8”, Bushing Length = 3/8”. PCB dimentions: 1.06” x 0.70” x 0.07”
$20.48
Save 10%
Originally: $22.75
R-VPMT-VTB250X Potentiometer - PMT, V-Treb, 250K Audio Treble Bleed, ⅜"
Precision Music Technologies V-Treb with 250KA course splined pot – Variable Treble Bleed Bypass Circuit. Made in USA. The V-Treb variable treble bleed/bypass circuit corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. Available in either course or fine settings
$13.95
Save 10%
Originally: $15.50
R-VPMT-VTB500X Potentiometer - PMT, V-Treb, 500K Audio Treble Bleed, ⅜"
Precision Music Technologies V-Treb with 500KA course splined pot – Variable Treble Bleed Bypass Circuit. Made in USA. The V-Treb variable treble bleed/bypass circuit corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. Pot: 24 mm body diameter, ¼” knurled split shaft. Bushing diameter = 3/8”, Bushing Length = 3/8”. PCB dimentions: 1.06” x 0.46” x 0.07”
Available in coarse or fine options
$13.95
Save 10%
Originally: $15.50
R-VPMT-VTC500L Potentiometer - PMT, Audio, Variable Treble Bleed, ¾"
Precision Music Technologies V-Treb with 500KA CTS pot – Variable Treble Bleed Bypass Circuit. Made in USA. The V-Treb variable treble bleed/bypass circuit corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. Pot: 24 mm body diameter, ¼” knurled split shaft. Bushing diameter = 3/8”, Bushing Length = 3/4”. PCB dimentions: 1.06” x 0.46” x 0.07”
$14.18
Save 10%
Originally: $15.75
R-VPMT-VTCX Potentiometer - PMT, CTS, Audio, Variable Treble Bleed, ⅜"
Resistances Available:
Precision Music Technologies V-Treb with CTS pot – Variable Treble Bleed Bypass Circuit. Made in USA.
The V-Treb variable treble bleed/bypass circuit corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced.
Pot:
24 mm body diameter, ¼” knurled split shaft. Bushing diameter = ⅜”, Bushing Length = ⅜”.
PCB dimentions:
1.06” x 0.46” x 0.07”
$13.95
Save 10%
Originally: $15.50
Don't see what you're looking for? Send us your product suggestions!