Guitar Parts & Pickups

Switchcraft Switch Tip for Gibson Pickup Selectors. Threading: 8-32. Replacement for Gibson: PRTK-010

Gibson style top hat knob.

Gibson style top hat knob.

Gibson style top hat knob. Multiple color options available.

Gibson style top hat knob.

Gibson style speed knob with embossed numbers. For 24 teeth knurled shaft.

Gibson style top hat knob. 24 spline (for knurled split shaft pots).

This Rhythm - Treble Ring for Gibson® Les Paul® is on thin plastic with Gold Lettering. The self-adhesive backing makes it easy to apply under the washer and nut of your typical 3-way toggle switch.

Gibson style top hat knob with embossed numbers. Multiple color options available.

Gibson style speed knob. For 24 teeth knurled shaft.

Generic plastic jack plate. Fits Les Paul and other guitars. Mount the guitar's output jack in the ⅜" hole in the center of the jack plate.

This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

• Length = 1 23/32 inches (43.75mm)
• Height #1 (fretboard side) = 5/16 inches (7.81mm)
• Height #2 (headstock side) = 9/32 inches (7mm)
• Thickness at bottom = 15/64 inches (6.1mm)
• Thickness at top = 3/16 inches (4.78mm)

Dunlop®, 6130,.036" x.106", 28% nickel/silver, hard alloy, 2 5/8" long, large/jumbo size, good on early Gibson®, 24 pieces

Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.

Switchcraft Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.

This truss rod cover will directly replace any Gibson two-screw bell shaped truss cover with no modifications. Mounts with (2) screws not included. Available in B/W/B or Cream

Replacement chrome tailpiece for Les Paul style guitars and others. M8 * 12.5 thread studs (anchor bushings included). Made in Korea.

If you’re one of the many Gibson® bass owners who are fed up with the stock bridge, our SuperTone Gibson® replacement bridge is the answer to your prayers. By utilizing the existing mount pattern, the SuperTone gives you a full range of intuitive adjustability and excellent tone transference without any modifications to your bass whatsoever. And with its timeless and elegant lines, the SuperTone will help you look as good as you sound. It’s the bridge your Gibson® has been waiting for.

This bridge, popularly referred to as the harmonica bridge is a direct replication of the original using all the same quality fabrication, dimensions and best of all, milled from steel billet to give you the tone you crave. Now there is finally a proper replacement for all those vintage Gibson guitars without having to modify the original instrument! Just when you thought you weren’t going to be able to restore your original hardware, Kluson comes through!

Hipshot 4 string Supertone 2 point bass bridge. A direct replacement for 1967 to 1973 Gibson 2 point bass bridges (e.g. Thunderbird, SG Bass, etc.) using the existing hole pattern. Features complete adjustability for precise intonation, independent string height and side-to-side string spacing. Includes: (2) 5/16-20 hex cap socket screws and (2) hex/allen keys: 1/16” and 5/64”

Switchcraft Pickup Selector, Replacement for Gibson L-Type. Similar to Gibson® PSTS-010. As found on 335 hollow body style guitars as well as thinner solid bodies such as the Gibson SG. This version of the L-Type switch is used in the common two pickup wiring for a neck position, middle position with neck and bridge, and a bridge position.