Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!

Gretsch

Gretsch is an American company that manufactures guitars, basses and drums. The company was founded in 1883 in Brooklyn, New York.
P-GPS-1X Pickup Kit - Build Your Own Humbucker
Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.
Starting at $14.02
Save 11%
Originally: $15.75
P-PUGRETX Pickup - Gretsch, FilterTron, nickel
"Gretsch Filter'Tron Electric Guitar Pickups Filter Out Hum, Neon Noises, Crackle and Electrical Disturbance!" The Filter'Tron "Electronic Guitar Head" was introduced in 1957 at the summer NAMM show in Chicago. Filter'Tron pickups feature dual-coils and are designed to Filter out the electronic hum normally associated with single-coil pickups, while adding a warmer tone, and a significant increase in output and sustain.
$75.61
Save 11%
Originally: $84.95
P-PUGRETMR-S Pickup Mounting Ring - Gretsch, FilterTron, Silver
Gretsch® Original Filtertron Pickup Ring, for bridge or neck.
In addition to the four mounting holes, these rings feature three pickup mounting holes, two on one side, one on the opposite side.
$5.87
Save 11%
Originally: $6.60
P-GB-HINGE-1X Hinge - Bigsby, Gretsch, for vibrato
Colors Available:
Original Bigsby vibrato hinge. Multiple color options available.
Bigsby Part No: 0495-0890G
Bigsby Part No: 0495-0890
Starting at $14.20
Save 11%
Originally: $15.95
P-GPS-4 Pickup Kit - Filtertron, Nickel Cover
Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 2 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.
These humbuckers feature two rows of adjustable polepiece, in bridge and neck position spacings. The neck pickup is warm and buttery, with a clear, present top end. The bridge pickup is fat and honky, with a rich low end and great clarity. Great choice for rock, rockabilly, blues, country and more!
  • Resistance(Kohm) : 4.8K
  • Magnet : Alnico 2 Bar

This kit builds one pickup.
$23.81
Save 11%
Originally: $26.75
P-K366 Switch Tip - Gretsch, Nickel
Package of 2
Original Gretsch nickel switch knobs. Made in USA. Gretsch part number: 922-1042-000
$10.01
Save 11%
Originally: $11.25
P-K364X Strap Buttons / Pins - Gretsch, Screw-On
Package of 2
Colors Available:
Gretsch screw-on strap button for guitars, package of 2
Starting at $15.98
Save 11%
Originally: $17.95
P-K36X Knob - Gretsch, "G" with Arrow logo
Package of 4
Colors Available:
"G" with arrow, package of 4. Gretsch originally used these knobs on guitars from 1957 - 1967. These knobs are designed to fit 1/4" solid shaft pots.
Starting at $35.38
Save 11%
Originally: $39.75
P-K363 Knob - Gretsch, Gold with Arrow, Set Screw
Package of 4
Arrow only, gold, package of 4.
$41.79
Save 11%
Originally: $46.95
On Backorder
P-GPS-2 Pickup Kit - Single Coil for Strat, White Cover
Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.
$13.31
Save 11%
Originally: $14.95
P-GPS-3X Pickup Kit - Tele, Bridge or Neck
Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. These pickups use alnico 5 pole pieces to produce a warm, well rounded classic tone.
$14.20
Save 11%
Originally: $15.95
P-GPS-5X Pickup Kit - J-Bass, Black Cover
Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. JBA is the most represented in J-Bass style pickup line of WSC. Overwound for more punch, midrange, bass, and output, and delivers '60s Jazz Bass tone. It is constructed with Alnico 5 magnets and Formvar magnet wire for serious thump and growl.
$15.09
Save 11%
Originally: $16.95
P-GPS-6 Pickup Kit - P-Bass, Black Cover
Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires. PBA pickup uses Alnico 5 rod magnets and a knifeedge gloss-cover hot coil wind that delivers a forceful sound with pushed midrange but tight bass and treble response. This pickup provides the humbucking punch and boom associated with the electric bass.
$16.24
Save 11%
Originally: $18.25
P-GP-COV-1N Pickup Cover - 50mm, Nickel
Nickel pickup cover used when winding your own humbucker sized pickups or for covering previously uncovered pickups to give them that sleek nickel look. These covers are plated and polished to a beautiful shine and feature a vintage style spacing.
  • 50mm/1.95” vintage style spacing(outer holes center to center)
  • Nickel plated
  • Overall measurements:70mm/2.76” Length x 39.7mm/1.56” Width x 16.8mm/.66” Height
  • Sold individually
$8.23
Save 11%
Originally: $9.25
P-GP-COV-1C Pickup Cover - 50mm, Chrome
Chrome pickup cover used when winding your own humbucker sized pickups or for covering previously uncovered pickups to give them that sleek chrome look. These covers are plated and polished to a beautiful shine and feature a vintage style spacing.
  • 50mm/1.95” vintage style spacing(outer holes center to center)
  • Chrome plated
  • Overall measurements: 70mm/2.76” Length x 39.7mm/1.56” Width x 16.8mm/.66” Height
  • Sold individually
$8.23
Save 11%
Originally: $9.25
P-GP-COV-2C Pickup Cover - Tele, Chrome
Standard chrome cover for telecaster rhythm/neck position pickup.
  • Chrome plated
  • Overall measurements: 65.1mm/2.56” Length x 15.9mm/.62” Width
  • Sold individually
$5.07
Save 11%
Originally: $5.70
P-GP-COV-3BR Pickup Cover - Nickel, Brass
Nickel pickup cover for building or repairing Filtertron style humbucking pickups.
  • Nickel plated brass
  • Overall measurements: 71.9mm/2.83” Length x 35.3mm/1.38” Width x 16.2mm/.63” Height
  • 63.6mm/2.50” center to center mounting screw holes
  • Sold individually
$11.88
Save 11%
Originally: $13.35
P-GP-PLATE-1 Pickup Part - Base Plate, Nickel
Nickel baseplate used for building your own humbucker pickups or repairing vintage originals. Vintage style spacing will accommodate many production pickups as a replacement.
  • 50mm/1.95” vintage style spacing(outer holes center to center)
  • .03 stamped nickel construction
  • Compatible with our pickup covers (P-GP-COV-1C and P-GP-COV-1N)
  • Sold individually
$4.54
Save 11%
Originally: $5.10
P-GP-PLATE-2 Pickup Part - Base Plate, Tele Bridge, Steel, Copper Plated
Copper plated steel baseplate for building a Telecaster bridge pickup or repairing a vintage original.
  • .04” copper plated steel
  • 6-32 mounting screw thread
  • Sold individually
$2.76
Save 11%
Originally: $3.10
P-GP-PLATE-3 Pickup Part - 7-String Base Plate, Nickel
Stamped nickel baseplate for building or repairing a 7 string pickup.
  • 61.2mm/2.40” spacing(outer holes center to center)
  • 88.9mm/3.50”mounting screw hole spacing (center to center)
  • .03” stamped nickel construction
  • Sold individually
$5.07
Save 11%
Originally: $5.70
P-GP100X Pickup Part - Black Bobbin, 7-string
Black humbucker screw or slug side bobbin for building or repairing 7-string pickups. Compatible with our 7-string baseplate (P-GP-PLATE-3). 61.2mm/2.40” pole spacing(outer holes center to center
$2.14
Save 11%
Originally: $2.40
P-GP102 Pickup Part - Metal Spacers
Metal spacer for building or repairing 7-string humbucking pickups. This spacer is found under the adjustable screw side of the pickup and is compatible with our 7-string baseplate (P-GP-PLATE-3) and screw-side bobbin (P-GP100).
$1.56
Save 11%
Originally: $1.75
P-COV-H50-U-X Cover - Humbucker, 50mm, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.
Starting at $5.30
Save 11%
Originally: $5.95
P-COV-HO-U-X Cover - Humbucker, Open, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have no holes.
Starting at $7.08
Save 11%
Originally: $7.95
Don't see what you're looking for? Send us your product suggestions!