Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!

Guitar Parts & Pickups

Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
P-GB7-X Vibrato - Bigsby, B7, for arch-top electric guitars
Colors Available:
Designed for use on arch top electric guitars.
Bigsby B7 Specifications
  • Model Name: B-7
  • Series: Original Kalamazoo Line
  • Manufacturing Method: Cast
  • Manufacturing Material: Aluminum
  • Approximate weight: 354 grams/12.5 oz.
  • Overall Length: 8 ¾" /222.3 mm
  • Overall Width: 3 5/8" /92.1 mm
  • Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

Bigsby B7 Includes:
  • Tremolo
  • Arm Assembly
  • 6 Mounting Screws
  • Spring
  • Plastic Washer
  • Installation Instructions
Starting at $164.95
P-GB5-X Vibrato - Bigsby, B5, for flat-top electric guitars
Colors Available:
The B5, sometimes referred as the Bigsby "horseshoe" is designed for flat top solid body guitars. Attaching via four screws to a guitar's top, the B5 is extremely versatile. B5s are common on many styles of guitars including SGs, Les Paul Jrs, Telecasters, and Rickenbacker 325s.
Bigsby B5 Specifications
  • Model Name: B-5
  • Series: Original Kalamazoo Line
  • Manufacturing Method: Cast
  • Manufacturing Material: Aluminum
  • Approximate Weight: 287 Grams
  • Overall Length: 4.75"/120.65mm
  • Overall Width: 3.7"/93.98mm

*Designed for use on thin hollow body and semi-hollowbody guitars
Starting at $122.00
S-T220 Tremolo Stopper - Brass Block, Hex Screw, Allen Key
Brass tremolo stopper. Used as a floating bridge stop for Fender and Floyd Rose style tremolo systems. Prevents inadvertent vibrato effects produced by resting the picking hand over the bridge while playing. Allows for down-bends and prevents up-bends for a stabilized return of the whammy bar. Allen screw can be easily reversed to allow for a floating bridge setup again. Includes: (1) brass block (1.05" L x .39" W x .49" H) (1) allen key, 2 mm (1) allen screw (M4 x .70 thread, 20 mm length) (1) hex nut (M4 x .70 thread) (2) countersunk mounting screws (10 mm length)
$8.50
P-GB-SPRING-4X Tension Spring - Bigsby, Vibrato, ~\frac{11}{16}~" long
Colors Available:
Genuine Bigsby® replacement spring for tremolo units. These springs are 11/16" (17.5mm) in length and are the shortest springs available from Bigsby®. 11/16" springs are shorter than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to lower the trem arm.
Starting at $6.95
P-GV5-X Adapter Kit - Vibramate, V5 Standard Mounting
Colors Available:
Vibramate Standard V5 Adapter Mounting Kit, For Bigsby B5, Aluminum Now you can install a Bigsby Vibrato on your guitar without drilling any holes!
Starting at $57.95
P-GGT-26-X Tremolo Arm - Wilkinson by Gotoh VS-100N
Colors Available:
Genuine replacement arm for the Wilkinson/Gotoh VS-100N Tremolo. Internally threaded, sturdy knobless .216"-diameter (5.5mm) stainless steel; extends approximately 5-⅝" (142.88mm). Sturdy VS-100N tremolo arm. Multiple color options available.
Starting at $9.00
P-GB-SPRING-5X Tension Spring - Bigsby, Vibrato, 1 ⅛" long
Colors Available:
Genuine Bigsby® replacement spring for tremolo units. These springs are 1 1/8" (28.6mm) in length and are the longest springs available from Bigsby®. 1 1/8" springs are longer than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to raise the trem arm.
$8.50
P-GVSR1-X Spoiler String Retainer - Vibramate
Colors Available:
Vibramate String Spoiler For Bigsby Vibratos The Vibramate String Spoiler is an ingenious little bracket designed to fit right onto your existing Bigsby vibrato without any modifications or special tools. It easily slips right into place and is held in position by the tension of the strings when tuned to pitch. The Spoiler makes string changes so easy you'll wonder how you ever lived without it. No more need for wrapping the strings around and under the vibrato roller with needle-nose pliers in an attempt to get the ball onto that little pin. Multiple color options available.
Starting at $36.25
P-GTARM0X Tremolo Arm - Fender®, Mexican Standard
Colors Available:
With white tip, for Mexican Standard Strat.
Starting at $6.95
P-GTFSPR-AM Tremolo Springs - Fender®, American Series
Package of 12
This spring helps set your tremolo arm in a fixed position when used with any Fender® American series or American Standard series tremolo. Simply insert spring into tremolo arm receptacle prior to installing tremolo arm. Package includes twelve tension springs. Used in Custom Shop, American Series, American Vintage, American Standard (USA), and Classic, Deluxe, and Road Worn® Series (Mexico) instruments.
$6.25
P-GV7-335-X Adapter Kit - Vibramate, V7-335 for Gibson and Epiphone Arch Top
Color / Spacings Available:
Vibramate V7-335 installs in minutes with no drilling! For arch top guitars with stop tailpiece and Tune-A-Matic bridge. The E-series is for 8.0" guitars. The G-Series is for 8.5" guitars.
Starting at $79.95
P-GB5-A--P-GV5-A Vibrato - Bigsby, B5 Aluminum, for solid-body guitars, with Vibramate
Includes:
  • (1) P-GB5-A
  • (1) P-GV5-A
$179.95
On Backorder
P-GT-ARM-X Tremolo arm tip - Fender®
Package of 2
Colors Available:
Get better leverage and grip on your whammy bar by replacing the plastic tip, package of two.
Starting at $2.95
P-GV7-LP-X Adapter Kit - Vibramate, Standard Carved Top Les Paul
Colors Available:
Vibramate V7-LP Les Paul Adapter Mounting Kit, For Bigsby B7 - Now you can install a Bigsby Vibrato on your carved top Les Paul® guitar without drilling any holes!
Starting at $54.95
P-GB-WASHER-2 Washer - Bigsby, Plastic
Genuine Bigsby® replacement washer for tremolo units. This white plastic washer sits beneath the spring in the cup located on the frame. These washers reduce noise and potential damage to the spring and cup.
$1.25
P-GB3-X Vibrato - Bigsby, B3, for thin hollow and semi-hollow guitars
Colors Available:
Designed for use on thin electric hollow and semi-hollow guitars
Bigsby B3 Specifications
  • Model Name: B-3
  • Series: Original Kalamazoo Line
  • Manufacturing Method: Sand Cast
  • Manufacturing Material: Aluminum
  • Approximate weight: 296 grams/10.4 oz.
  • Overall Length: 7 5/8" /193.7mm
  • Overall Width: 3 5/8" /92.1mm
  • Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench
Starting at $134.95
P-GB-SPRING-1X Tension Spring - Bigsby, Vibrato, 1" long
Colors Available:
Genuine Bigsby® replacement spring for tremolo units. These springs are 1" (25.4mm) in length. 1" springs are longer than the standard ⅞” (22.2mm) springs that are stock in most Bigsby models. This spring can be used to raise the trem arm.
Starting at $6.95
P-GVB-SB-GRIP Vibramate - Super Grip for Bigsby Trems
The Vibramate Super Grip is custom made specifically to fit the arm of your Bigsby vibrato. The textured design adds contour to the overall grip and a soft comfortable feel for subtle vibrato techniques. The Vibramate Super Grip easily slides onto your existing Bigsby vibrato arm without any modifications or special tools. The tapered design ensures a snug fit once installed but can be removed just as easily by sliding it back off. One size fits all - Vibramate Super Grip fits all Bigsby vibratos using the standard stock flat arm including Import and Left-Hand models. Made in USA.
$8.95
P-GGT-25-X Tremolo - Wilkinson by Gotoh, VSVG, Vintage
Colors Available:
If you are looking for a tremolo that is designed for enhanced sustain and better reliability, then you have found it. The VSVG Vintage tremolo features enlongated baseplate holes so the screws won't bind and it gives a very smooth, accurate return to pitch. With the string mounting holes being staggered in the steel block you will find much more tuning stability because of the more consistent string angle over the adjustable locking bent-steel saddles. Hardware included.
Starting at $102.00
P-GV5-TEV-X Adapter Kit - Vibramate, V5 Stage II Vintage Telecaster, chrome
Now you can install a Bigsby Vibrato on your vintage Telecaster® guitar without drilling any holes! The Vibramate V5-TEV Stage II Model Mounting Kit is designed for a Bigsby B5 Original Vibrato and will fit most standard Telecaster® guitars that have a vintage style "Ash-Tray" bridge and 4-screw mount. The kit includes mounting hardware for the Bigsby B5 Vibrato and utilizes your existing Telecaster® pickup and bridge saddles.
Starting at $87.95
P-GTSPRN-X Tremolo springs - Replacement for Fender Style Tremolos
Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.
Starting at $1.15
P-GTSPRN-5 Tremolo Springs - Fender®, Tension, Package of 5
Package of 5
Set of five Stratocaster® tremolo tension springs for use on American Vintage series and Custom Shop instruments.
  • Set of five nickel-plated steel tremolo tension springs
  • For American Vintage series and Custom Shop instruments
$8.79
P-GB6-X Vibrato - Bigsby, B6, for large hollow-body guitars
Colors Available:
Designed for use on thin hollow body and semi-hollowbody guitars
Bigsby B6 Specifications
  • Model Name: B-6
  • Series: Original Kalamazoo Line
  • Manufacturing Method: Cast
  • Manufacturing Material: Aluminum
  • Approximate weight: 311 grams/11 oz.
  • Overall Length: 9" /235 mm
  • Overall Width: 3 5/8" / 92.1 mm
  • Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench
Starting at $203.95
P-GB-PIN-X2 Pin - Bigsby, Hinge
Colors Available:
Genuine Bigsby® replacement hinge pin for tremolo units. This hinge pin measures 1 13/16" from the base of the head to the end.
Starting at $3.95
Don't see what you're looking for? Send us your product suggestions!