Grid / Plate Anode Cap - Ceramic for tubes

Pictured: 7mm top connection
Pictured: 7mm top connection
Pictured: .36" top connection
Pictured: .36" top connection
Pictured: .566" top connection
Pictured: .566" top connection
Pictured: .25" top connection
Pictured: .25" top connection
Click to zoom in
Grid / Plate Anode Cap - Ceramic for tubes image 1Grid / Plate Anode Cap - Ceramic for tubes image 2Grid / Plate Anode Cap - Ceramic for tubes image 3Grid / Plate Anode Cap - Ceramic for tubes image 4
Customer Images:
No Images yet! Submit a product image below!

Grid / Plate Anode Cap - Ceramic for tubes

Starting at: $0.62
In stock

Diameter listed is the inside diameter. The anode cap is used for making an electrical connection to vacuum tubes which have anode high voltage connection from the top. Its contact resistance is less than 0.01 ohm, insulation resisitance is over 10,000 Mohm. Life time is about 200 cycles.

SKU:
P-SG11X
Item ID:
003320
Part Numbers
FitsOur Part NumberUPC/EAN
.25" top connectionP-SG117841358108235
7mm top connectionP-SG110609722155359
.36" top connectionP-SG111609722155366
.566" top connectionP-SG115609722155373
Product Measurements
Intensity of Breakdown20 KV × mm
Intensity of Resisting Fold1,400k gf/cm2
Interior Diameter.25" top connection version8.5 mm
.36" top connection version11.3 mm
7mm top connection version8.5 mm
Interior Height.25" top connection version8 mm
.36" top connection version11.5 mm
.566" top connection version15 mm
7mm top connection version8 mm
Intervene Current Normal Number< 7.5
Item Height.25" top connection version10.5 mm
.36" top connection version17 mm
.566" top connection version20 mm
7mm top connection version10.5 mm
Item Length.25" top connection version22 mm
.36" top connection version30.5 mm
.566" top connection version38.4 mm
7mm top connection version22 mm
Item Width.25" top connection version13 mm
.36" top connection version17 mm
.566" top connection version24 mm
7mm top connection version13 mm
Lifetime~ 200 cycles
Resistivity> 1012 Ω×cm
Secant Of Depletion< 8×10-4
Swell Modulus< 8×10-6 mm/℃
Volume Density> 2.7 g/cm3
Packaging Information
Packaging Dimensions.25" top connection version0.885 in. × 0.514 in. × 0.42 in.
.36" top connection version1.3 in. × 0.8 in. × 0.8 in.
.566" top connection version1.5 in. × 1 in. × 0.8 in.
7mm top connection version3 in. × 2 in. × 1 in.
Weight (Packaging).25" top connection version0.011 lbs.
.36" top connection version0.026 lbs.
.566" top connection version0.055 lbs.
7mm top connection version0.014 lbs.

My Project Lists

You must be logged in to add items to a project list.

Questions and Answers

Click each question to see its answers.
Asked by Anonymous on March 7th, 2017.
Matt H
March 7th, 2017
You would want to solder to the metal tab.
Matt H
March 7th, 2017
You would want to solder to the metal tab.
Asked by Anonymous on January 5th, 2017.
Matt H
January 5th, 2017
Hi, we do not have the resources or reference materials to determine if this will work in your application. I would compare specs to insure a proper fit.
Asked by Anonymous on December 20th, 2017.
Matt H
December 20th, 2017
Currently, these are the only grid caps we offer.
Asked by Anonymous on September 5th, 2018.
BradWbr
September 5th, 2018
Staff Member
You will want to measure your tube to insure a proper fit.

Product Reviews

5.00 out of 5 based on 1 reviews
- May 24th, 2019
5 out of 5

Good

Don't see what you're looking for? Send us your product suggestions!