Click to zoom in
Customer Images:
No Images yet! Submit a product image below!
Fuse - Slow-Blow, 250V, Miniature, 5mm x 20mm
Protect your expensive investment or hobby with inexpensive fuses. Time-delay, low breaking capacity.
- GMD Type
- Rated at 250V
- Measures .78"(20mm) in length, 0.19"(5mm) in diameter
- Slow-Blow
- Package of 5
| Amperage | Our Part Number | UPC/EAN |
|---|---|---|
| 0.5 Amps | F-ZGMD-SD5 | 609722164382 |
| 1 Amps | F-ZGMD-S1 | 841358104787 |
| 2 Amps | F-ZGMD-S2 | 609722131117 |
| 3 Amps | F-ZGMD-S3 | 609722131124 |
| 4 Amps | F-ZGMD-S4 | 609722131131 |
| D.C. Cold Resistance | 0.5 Amps version | 1.0645 Ω |
| 1 Amps version | 0.3065 Ω | |
| 2 Amps version | 0.107 Ω | |
| 3 Amps version | 0.0655 Ω | |
| 4 Amps version | 0.048 Ω | |
| Diameter | 0.1968 in. | |
| Interrupting Rating @ 125 VAC | 10,000 A | |
| Interrupting Rating @ 250 VAC | 0.5 Amps version | 35 A |
| 1 Amps version | 35 A | |
| 2 Amps version | 100 A | |
| 3 Amps version | 100 A | |
| 4 Amps version | 200 A | |
| Item Length | 0.7874 in. | |
| Melting (I2t) | 0.5 Amps version | 1.4 A |
| 1 Amps version | 12 A | |
| 2 Amps version | 42 A | |
| 3 Amps version | 145 A | |
| 4 Amps version | 300 A | |
| Voltage Drop | 0.5 Amps version | 550 mV |
| 1 Amps version | 310 mV | |
| 2 Amps version | 200 mV | |
| 3 Amps version | 190 mV | |
| 4 Amps version | 190 mV | |
| Voltage Rating | 250 V |
| Packaging Dimensions | 0.5 Amps version | 0.963 in. × 0.791 in. × 0.187 in. |
| 1 Amps version | 2.8 in. × 1.3 in. × 0.3 in. | |
| 2 Amps version | 2.8 in. × 1.3 in. × 0.3 in. | |
| 3 Amps version | 2.8 in. × 1 in. × 0.3 in. | |
| 4 Amps version | 2.8 in. × 1.4 in. × 0.3 in. | |
| Weight (Packaging) | 0.5 Amps version | 0.15 lbs. |
| 1 Amps version | 0.05 lbs. | |
| 2 Amps version | 0.05 lbs. | |
| 3 Amps version | 0.05 lbs. | |
| 4 Amps version | 0.06 lbs. |
 Specification Sheet | All Models |
My Project Lists
Specifications, Files, and Documents
Questions and Answers
Click each question to see its answers.
1 answers
Do you sell the holder for this fuse?
Asked by Anonymous on November 21st, 2017.
We have a few different holders but they will be specific to the amp. Do a search for fuse holders. You can also email us at info@amplifiedparts.com if you can not find what you are looking for.
1 answers
Will this work in my Fender Frontman 15G?
Asked by Anonymous on March 20th, 2018.
March 20th, 2018
Staff Member
We do not have cross reference materials to verify what type of fuse is used in a Fender Frontman 15G. You will need to consult a tech in your area.
1 answers
my Vox ac100cph needs this in a 5amp version. have any?
Asked by Anonymous on April 27th, 2018.
Unfortunately we only have these up to 4 amps.
1 answers
Will this work on my Marshall valvestat 2000 AVT 275 1960 classic
Asked by Anonymous on September 25th, 2018.
September 26th, 2018
Staff Member
We do not have sufficient cross reference materials to verify what fuse is needed for your amp. Most amplifiers will have such information printed somewhere on the amplifier chassis. Please refer to your amp or contact Marshall direct.
1 answers
Is this the correct fuse for a Marshall JCM 900 4100 100 watt valve fuse?
Asked by Anonymous on October 4th, 2018.
October 4th, 2018
Staff Member
We do not have sufficient cross reference materials to verify what fuse is needed for your amp. We advise consulting a tech or contacting Marshall direct.
1 answers
I'm in need of a 1 amp 220 volt slow blow fuse for a guitar amp, is the 250 volt rating on these fuses ok to use?
Asked by Anonymous on October 16th, 2018.
October 16th, 2018
Staff Member
Yes, it is safe to go higher in voltage, but not under.
1 answers
Will this work in a powered p.a speaker?
Asked by Anonymous on November 29th, 2018.
November 30th, 2018
Staff Member
If your powered P.A. speaker calls for a 20mm, slo-blo fuse rated at 0.5 amp to 4 amp, yes, this will work. It should have information about the type of fuse needed printed somewhere on the speaker or in the literature the manufacturer provides.
Product Reviews