Enclosures / Chassis

P-H-M45-GORVA-X Chassis Box - GØRVA Design, M45, Diecast, 3.94" x 1.77" x 1.38"
Colors Available:
The Gorva Design M45 enclosure has similar dimensions to 1590A but a bit larger for practical use. It measures 100mm [3.94"] x 45mm [1.77"] x 35 mm [1.38"]. The extended dimensions allow for easier builds and top mounted jacks. Features:
  • Slightly beveled top and rounded corners for a high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for a more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Recessed bottom lid
$9.95
P-H1590BCEX Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
New!:
4.40" x 2.38" x 1.06" D. Equivalent to Hammond P-H1590B.
Add 0.16" to enclosure depth for lid.
Starting at $5.95
P-H1590MS-X Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Package of 4
Colors Available:
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
$0.79
P-HWCHAS1310X Chassis Box - Hammond, Walnut / Aluminum, 13" x 10" x 3"
Colors Available:
Special Order Item
Walnut chassis with aluminum top panel. Measures 13" x 10" x 3".
  • Heavy duty construction walnut chassis.
  • Top panel in natural aluminium.
  • Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
  • Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
  • Includes four large round rubber feet (0.75" dia.
Starting at $86.89
Partially Out of Stock
Note: special order items require additional lead time. See our page on special order items.
P-H1441-20X Chassis Box - Hammond, Steel, 17" x 4" x 3"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Chassis box 17 inch wide by 4 inch deep by 3 inch tall.
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3
Starting at $30.02
Note: P-H1441-20BK3: Black is a special order item.
P-H1441-28X Chassis Box - Hammond, Steel, 16" x 8" x 3"
Colors Available:
Hammond Chassis Box, steel, 16 in. x 8 in. x 3 in.
  • Spot welded heavy duty construction chassis.
  • 0.036" thick.
  • Dimensions shown are exterior dimensions.
  • Does not include cover. See P-H1431-26
Starting at $35.00
P-H1431-29X Cover Plate - Hammond, Steel, 12" x 10", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 12” x 10” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Starting at $12.56
Note: P-H1431-29: Grey is a special order item.
P-H1441-26X Chassis Box - Hammond, Steel, 16" x 8" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-26
Starting at $29.61
P-H1441-9X Chassis Box - Hammond, Steel, 8" x 4" x 1"
Colors Available:
Special Order Item
8 inch wide by 4 inch deep by 1 inch tall
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-9 P-H1431-9 Steel Black Satin P-H1441-9BK3 P-H1431-9BK3
$12.73
Out of Stock
P-H1590ACE-X Chassis Box - 1590A, Diecast, 3.64" x 1.52" x 1.06"
Colors Available:
Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.
$5.65
P-H1441-8X Chassis Box - Hammond, Steel, 6" x 4" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-8 or P-H1431-8BK3
Starting at $11.66
P-HRM-1U-19 Rack-mounted Enclosure - Hammond, 1U, full-width
1 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
  • Manufactured in North America.
Starting at $132.54
P-H1431-12X Cover Plate - Hammond, Steel, 7" x 5", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 7” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$4.48
P-H1441-10BK3 Chassis Box - Hammond, Steel, 8" x 4" x 2", Black
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Black powder coated. Dimensions shown are exterior dimensions. Does not include cover.
$12.73
Note: special order items require additional lead time. See our page on special order items.
P-H1451-26X Chassis Cage - Hammond, Steel, 16" x 8" x 5.2"
Colors Available:
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • Four self-tapping screws included.
Starting at $52.50
P-HRM-2U-19 Rack-mounted Enclosure - Hammond, 2U, full-width
2 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
  • Manufactured in North America.
Starting at $158.00
P-H1431-18X Cover Plate - Hammond, Steel, 13.5" x 5", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 13.5” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8"" holes to allow installation of optional bottom plates).
$8.08
P-H1441-38X Chassis Box - Hammond, Steel, 17" x 14" x 3"
Colors Available:
Special Order Item
Chassis box 17 inch wide by 14 inch deep by 3 inch tall
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-38 P-H1431-38 Steel Black Satin P-H1431-38BK3
$58.24
Note: special order items require additional lead time. See our page on special order items.
P-H1590BX Chassis Box - Hammond, 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $7.07
P-HRM-3U-19 Rack-mounted Enclosure - Hammond, 3U, full-width
3 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
  • Manufactured in North America.
Starting at $188.75
P-H1431-22X Cover Plate - Hammond, Steel, 12" x 8", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 12” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
$9.87
P-H1441-12BK3CWW Chassis Box - Hammond, Steel, 7" x 5" x 2", Walnut Side Panels
Special Order Item
7" wide x 5" long x 2" tall steel chassis and bottom plate with walnut side panels Features:
  • Spot welded steel (20 gauge) - heavy duty construction chassis.
  • Steel chassis is finished in satin black powder paint
  • Side panels are made from solid walnut and routed out to fit over ends of chassis (pre-punched for easy mounting).
  • Walnut side panels attach with four machine screws & lockwashers (included) into metal inserts to avoid wood damage.
$58.41
Note: special order items require additional lead time. See our page on special order items.
P-H1590BBCE-X Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
Chassis box perfectly suited for effects pedals and other DIY projects.
Starting at $9.15
P-H1590N1-GORVA-X Chassis Box - GØRVA Design, C65, Diecast, 4.72” x 2.56” x 1.54”
Colors Available:
The Gorva C65 is a high quality powder-coated take on the Hammond 125B size enclosure with a focus on function and design. Features:
  • Slightly beveled top and rounded corners for high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Recessed bottom lid
$14.95
Don't see what you're looking for? Send us your product suggestions!