Enclosures / Chassis

30° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:

• 4" x 5.5" x 3" (1” height at front)
• Bottom panels are 0.081” (2 mm) thick aluminum
• Top panels are 0.064” thick aluminum
• Fully Powder Coated
• Comes with self adhesive rubber feet and required mounting hardware.

15° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:

• 4" x 5.5" x 2" (1” height at front)
• Bottom panels are 0.081” (2 mm) thick aluminum
• Top panels are 0.064” thick aluminum
• Fully Powder Coated
• Comes with self adhesive rubber feet and required mounting hardware.

Spot welded heavy duty construction chassis. 0.036 thick. Does not include cover. please refer to P-H1431-29

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Chassis box 17 inch wide by 4 inch deep by 3 inch tall.

• Spot welded steel - heavy duty construction chassis.
• Finished in ASA 61 smooth grey or satin black powder paint
• Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3

1 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.

• Strong construction, yet light weight using all aluminum components
• Suitable for desk top or rack-mountable applications.
• Knockdown design ships un-assembled for easy handling and shipping protection.
• Strong construction using:
  
  • extruded aluminum side panels 0.125" (3.2 mm) thick
  • extruded aluminum front & rear panels 0.125" (3.2mm) thick
  • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
• Can be used with or without rack mounting brackets (one pair included)
• Front & rear panel are interchangeable.
• Enclosure is finished in rugged, textured, black powder coat.
• Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
• Manufactured in North America.

17 inch wide by 10 inch deep by 2 inches tall

• Spot welded steel - heavy duty construction chassis.
• Finished in ASA 61 smooth grey
• Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-30 P-H1431-30 Steel Black Satin P-H1431-30BK3

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-26

2 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.

• Strong construction, yet light weight using all aluminum components
• Suitable for desk top or rack-mountable applications.
• Knockdown design ships un-assembled for easy handling and shipping protection.
• Strong construction using:
  
  • extruded aluminum side panels 0.125" (3.2 mm) thick
  • extruded aluminum front & rear panels 0.125" (3.2mm) thick
  • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
• Can be used with or without rack mounting brackets (one pair included)
• Front & rear panel are interchangeable.
• Enclosure is finished in rugged, textured, black powder coat.
• Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
• Manufactured in North America.

Cover for chassis box 17 inch wide by 14 inch deep by 5 inch tall.

• Spot welded steel - heavy duty construction chassis.
• Finished in ASA 61 smooth grey or satin black powder paint
• Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-8 or P-H1431-8BK3

3 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.

• Strong construction, yet light weight using all aluminum components
• Suitable for desk top or rack-mountable applications.
• Knockdown design ships un-assembled for easy handling and shipping protection.
• Strong construction using:
  
  • extruded aluminum side panels 0.125" (3.2 mm) thick
  • extruded aluminum front & rear panels 0.125" (3.2mm) thick
  • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
• Can be used with or without rack mounting brackets (one pair included)
• Front & rear panel are interchangeable.
• Enclosure is finished in rugged, textured, black powder coat.
• Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
• Manufactured in North America.

Hammond Mfg 20 gauge steel 7” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).

17" wide x 10" long x 4" tall steel chassis with walnut side panels Features:

• Spot welded steel (20 gauge) - heavy duty construction chassis.
• Steel chassis is finished in satin black powder paint
• Side panels are made from solid walnut and routed out to fit over ends of chassis (pre-punched for easy mounting).
• Walnut side panels attach with four machine screws & lockwashers (included) into metal inserts to avoid wood damage.

• Dimensions shown are exterior dimensions.
• For use with the P-H1441 and P-H1444 series chassis.
• Four self-tapping screws included.

Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.

Hammond Mfg 20 gauge steel 13.5” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8"" holes to allow installation of optional bottom plates).

12" wide x 8" long x 3" tall steel chassis with walnut side panels Features:

• Spot welded steel (20 gauge) - heavy duty construction chassis.
• Steel chassis is finished in satin black powder paint
• Side panels are made from solid walnut and routed out to fit over ends of chassis (pre-punched for easy mounting).
• Walnut side panels attach with four machine screws & lockwashers (included) into metal inserts to avoid wood damage.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Hammond Mfg 20 gauge steel 12” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).

Uniquely shaped trapezoid Hammond enclosure. Screws included.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

20 gauge. Cover for chassis box 17 inch wide by 10 inch deep. Spot welded steel - heavy duty construction chassis. Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Hammond Chassis Box, steel, 16 in. x 8 in. x 3 in.

• Spot welded heavy duty construction chassis.
• 0.036" thick.
• Dimensions shown are exterior dimensions.
• Does not include cover. See P-H1431-26

Walnut chassis with aluminum top panel. Measures 13" x 10" x 3".

• Heavy duty construction walnut chassis.
• Top panel in natural aluminium.
• Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
• Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
• Includes four large round rubber feet (0.75" dia.