Enclosures / Chassis

P-H1590TRPB Chassis Box - Hammond, 1590TRPB, Short Trapezoid, 4.41 x 3.11 x 1.54"
Short trapezoid shaped Hammond enclosure. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$9.25
P-H1590BCEX Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
New!:
4.40" x 2.38" x 1.06" D. Equivalent to Hammond P-H1590B.
Add 0.16" to enclosure depth for lid.
Starting at $5.95
P-H1590MS-X Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Package of 4
Colors Available:
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
$0.79
P-H1444-24CWW Chassis Box - Hammond, 12" x 8" x 3", Wood Sides
Hammond aluminum chassis box with walnut sides. Measures 12" by 8" by 3".
$76.76
P-H1590N1 Chassis Box - Hammond, 1590N1, Diecast, 4.77" x 2.58" x 1.41"
Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
Add 0.16" to enclosure depth for lid.
$10.81
P-H1444-26 Chassis Box - Hammond, Aluminum, 16" x 8" x 2"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
  • Spot-welded heavy duty construction
  • Natural finish
Does not include cover. See P-H1434-26
$28.45
P-H1444-12825 Chassis Box - Hammond, Aluminum, 12" x 8" x 2.5"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$24.57
Out of Stock
P-H1590ACE-X Chassis Box - 1590A, Diecast, 3.64" x 1.52" x 1.06"
Colors Available:
Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.
$5.65
P-HCH06 Chassis - Marshall Style JTM-45 with front and back plates
Marshall™ style JTM45 chassis w/ front and back plates
  • Brushed aluminum chassis, .07" thick.
  • Gold “plexi” style front and back plates
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 3
  • Capacitor mounting holes:1
  • Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:
  • Power transformer mounting centers: 3-7/16” x 2-3/4”
  • Output transformer mounting centers: 2-1/2” x 2-3/8”
  • Choke mounting centers: (#1) 2-7/8” (#2) 3-3/16”
  • Can cap mounting centers : 2”
  • Octal (8-pin) tube sockets: 1-1/2”
  • Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:
  • Noval socket with shield base: P-ST9-700
  • Noval socket (no shield): P-ST9-600
  • Octal socket : P-ST8-600
  • Output transformer: P-T1750Q
  • Choke: P-C194G
$88.47
P-H1590V Chassis Box - Hammond, 1590V, Diecast, 4.70" x 4.70" x 3.54"
Special Order Item
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$18.38
Note: special order items require additional lead time. See our page on special order items.
P-H1444-32 Chassis Box - Hammond, Aluminum, 17" x 10" x 3"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
  • Spot-welded heavy duty construction
  • Natural finish
Does not include cover. See P-H1434-30
$37.34
On Backorder
P-H1434-86 Cover Plate - Hammond, Aluminum, 8" x 6"
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$7.17
P-H1434-127 Cover Plate - Hammond, Aluminum, 12" x 7", 20 Gauge
Special Order Item
20 gauge bottom chassis plate for P-H1444-1273 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$6.83
Note: special order items require additional lead time. See our page on special order items.
P-HCH08 Chassis - Marshall Style 18 Watt Tremolo
Marshall™ style 18 Watt Tremolo chassis w/ front and back plates
  • Brushed aluminum chassis, .07" thick.
  • Gold “plexi” style front and back plates
  • 9-Pin (miniature) socket holes: 6
  • Capacitor mounting holes:1
  • Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:
  • Power transformer mounting centers: 3-1/8” x 2-1/2”
  • Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
  • Can cap mounting centers : 2”
  • Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:
  • Noval socket with shield base: P-ST9-700
  • Noval socket (no shield): P-ST9-600
$88.47
P-H1590XX Chassis Box - Hammond, 1590XX, Diecast, 5.72" x 4.77" x 1.39"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$13.02
P-H1590A Chassis Box - Hammond, 1590A, Diecast, 3.64" x 1.52" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$6.22
P-H1434-97 Cover Plate - Hammond, 20 gauge steel, 9" x 7"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$5.92
Out of Stock
P-H1444-1273 Chassis Box - Hammond, Aluminum, 12" x 7" x 3"
Special Order Item
Aluminum chassis. 0.051" thick. Spot-welded heavy duty construction. See P-H1434-127 for cover.
$21.84
Note: special order items require additional lead time. See our page on special order items.
P-H1434-12 Cover Plate - Hammond, Aluminum, 7" x 5", 20 Gauge
20 gauge bottom chassis plate for P-H1444-12 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$4.61
P-H1590B3 Chassis Box - Hammond, 1590B3, Diecast, 4.57" x 3.03" x 1.32"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
$8.90
P-HHW1310XPL Cover Plate - Hammond, Aluminum, 11.75" x 8.75"
Colors Available:
Special Order Item
Bottom panel for use with Hammond HWCHAS1310 Natural Aluminum. 11.75" W X 8.75" D
Starting at $10.65
Note: special order items require additional lead time. See our page on special order items.
P-H1590BBX Chassis Box - Hammond, 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $9.42
P-H1434-955 Cover Plate - Hammond, Aluminum, 9.5" x 5"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$5.00
Out of Stock
P-H1444-20 Chassis Box - Hammond, Aluminum, 17" x 4" x 3"
Special Order Item
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions. Features:
  • Spot-welded heavy duty construction
  • Natural finish

Does not include cover.
$27.29
Out of Stock
Don't see what you're looking for? Send us your product suggestions!