Enclosures / Chassis

P-HFZ-3-DGRY Chassis - Mod®, Buzzaround, Pre-drilled, Hammered Dark Gray
Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original Burns Buzzaround enclosures and is pre-drilled to match the original layout of the Buzzaround pedal. The hammered dark gray powder coat provides a close match for the original appearance but will hold up much better than the paint found on the vintage pedals.
$74.95
P-H1590BB-GORVA-HMT-BLU Chassis Box - GØRVA Design, S90, Diecast, 4.61" x 3.54" x 1.38", Hammered Blue
Limited Run!
The Gorva S90 is a high quality hammered blue powder-coated take on the Hammond 1590BBM size enclosure with a focus on function and design.
Features:
  • Hammered Blue powdercoat
  • Beveled top and rounded corners for high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered blue enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BLU 1590N1 / 125B P-H1590N1CE-HMT-BLU C65 (Gorva) P-H1590N1-GORVA-HMT-BLU S90 (Gorva) P-H1590BB-GORVA-HMT-BLU YY P-H-YY-HMT-BLU 1590TRPD Trapezoid P-H1590TRPB-HMT-BLU
$18.95
Out of Stock
P-H1590N1CE-HMT-BLU Chassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.58" x 1.41", Hammered Blue
Limited Run!
1590N1 / 125B diecast enclosure finished in a hammered blue powdercoat. Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
  • 4.77" x 2.58" x 1.41"
  • Hammered blue powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590N1
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered blue enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BLU 1590N1 / 125B P-H1590N1CE-HMT-BLU 1590N1 (Gorva) P-H1590N1-GORVA-HMT-BLU 1590BB (Gorva) P-H1590BB-GORVA-HMT-BLU YY P-H-YY-HMT-BLU 1590TRPD Trapezoid P-H1590TRPB-HMT-BLU
$14.75
Out of Stock
P-H1590TRPB-HMT-BLU Chassis Box - Hammond, 1590TRPB, Short Trapezoid, 4.41 x 3.11 x 1.54", Hammered Blue
Limited Run!
Short trapezoid shaped Hammond enclosure in a hammered blue powdercoat. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:
  • Hammered blue powdercoat
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$24.95
Out of Stock
P-H1590BCE-HMT-BLU Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Blue
Limited Run!
1590B diecast enclosure finished in a hammered blue powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered blue powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered blue enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BLU 1590N1 / 125B P-H1590N1CE-HMT-BLU C65 (Gorva) P-H1590N1-GORVA-HMT-BLU S90 (Gorva) P-H1590BB-GORVA-HMT-BLU YY P-H-YY-HMT-BLU 1590TRPD Trapezoid P-H1590TRPB-HMT-BLU
$14.95
P-H1590N1-GORVA-HMT-BLU Chassis Box - GØRVA Design, C65, Diecast, 4.72” x 2.56” x 1.54”, Hammered Blue
Limited Run!
The Gorva C65 is a high quality powder-coated take on the Hammond 125B size enclosure with a focus on function and design. Features:
  • Hammerted Blue powdercoat
  • Slightly beveled top and rounded corners for high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for more flexible layout.
  • Smooth, eggshell-like matte powder coating.
  • Recessed bottom lid

Part of a limited run of hammered blue enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BLU 1590N1 / 125B P-H1590N1CE-HMT-BLU C65 (Gorva) P-H1590N1-GORVA-HMT-BLU S90 (Gorva) P-H1590BB-GORVA-HMT-BLU YY P-H-YY-HMT-BLU 1590TRPD Trapezoid P-H1590TRPB-HMT-BLU
$19.95
Out of Stock
P-H-YY-HMT-BLU Chassis Box - YY, Diecast, Slanted, 4.65" x 3.70" x 1.66", Hammered Blue
Limited Run!
YY enclosure finished in a hammered blue powdercoat. The slanted YY enclosures are perfect for fuzz pedals and other vintage style effects. In addition to the classic slant, this enclosure features thick diecast walls and a recessed bottom cover. The four bottom plate cover screws are included. Features
  • Vintage style slant
  • Hammered blue powdercoat
  • Flat top-section for mounting controls
  • Recessed lid
  • Thick diecast construction

Part of a limited run of hammered blue enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BLU 1590N1 / 125B P-H1590N1CE-HMT-BLU 1590N1 (Gorva) P-H1590N1-GORVA-HMT-BLU 1590BB (Gorva) P-H1590BB-GORVA-HMT-BLU YY P-H-YY-HMT-BLU 1590TRPD Trapezoid P-H1590TRPB-HMT-BLU
$35.95
Out of Stock
P-HWAH Enclosure - Wah Pedal Shell and Hardware
Wah pedal enclosure, bottom, and foot-pedal shell and hardware. Enclosure shell & foot pedal are cast aluminum.
$40.00
P-H1434-86 Cover Plate - Hammond, Aluminum, 8" x 6"
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$9.10
P-H1590BBCE-HMT-BRZ Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Hammered Bronze
Limited Run!
1590BB diecast enclosure finished in a hammered bronze powdercoat. The 1590BB chassis box is perfectly suited for effects pedals and other DIY projects.
  • 4.71" x 3.70" x 1.18"
  • Hammered bronze powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590BB
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered bronze enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-BRZ 1590N1 / 125B P-H1590N1CE-HMT-BRZ 1590BB P-H1590BBCE-HTM-BRZ YY P-H-YY-HMT-BRZ 1590J P-H1590J-HMT-BRZ
$14.95
Out of Stock
P-H1444-22 Chassis Box - Hammond, Aluminum, 12" x 8" x 2"
Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:
  • Spot-welded heavy duty construction
  • Natural finish
Does not include cover. See P-H1434-22
$35.10
P-H1441-28X Chassis Box - Hammond, Steel, 16" x 8" x 3"
Colors Available:
Hammond Chassis Box, steel, 16 in. x 8 in. x 3 in.
  • Spot welded heavy duty construction chassis.
  • 0.036" thick.
  • Dimensions shown are exterior dimensions.
  • Does not include cover. See P-H1431-26
$47.25
P-H1456-2A-X Chassis Box - Hammond, 1456, 15° Aluminum, 4" x 5.5" x 2"
Colors Available:
15° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:
  • 4" x 5.5" x 2" (1” height at front)
  • Bottom panels are 0.081” (2 mm) thick aluminum
  • Top panels are 0.064” thick aluminum
  • Fully Powder Coated
  • Comes with self adhesive rubber feet and required mounting hardware.
$30.90
P-HFZ-2 Chassis - Mod® Electronics, MK1 Fuzz, Pre-drilled, Folded 16 ga. Steel
Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original MK1 Tone Bender enclosures and is pre-drilled to match the original layout of the MK1 pedal. The layout is intended for two pots, two jacks, and a footswitch so many fuzz varieties can be built in this enclosure. The MK1 fuzz enclosure features a removable bottom door for easy access to the battery. All required screws and rubber feet are included.
$49.95
P-H1434-22 Cover Plate - Hammond, Aluminum, 12" x 8", 20 Gauge
20 gauge bottom chassis plate for P-H1444-22 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$13.55
P-H1444-12103 Chassis Box - Hammond, Aluminum, 12" x 10" x 3"
Special Order Item
Aluminum chassis. 0.051" thick. Spot-welded heavy duty construction. See P-H1434-29 for cover
$33.95
Note: special order items require additional lead time. See our page on special order items.
P-HRM-4U-19 Rack-mounted Enclosure - Hammond, 4U, full-width
4 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
  • Manufactured in North America.
Starting at $259.88
P-H1590F Chassis Box - Hammond, 1590F, Diecast, 7.40" x 7.40" x 2.48"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
$33.10
P-H1590BB2 Chassis Box - Hammond, 1590BB2, Diecast, 4.7" x 3.7" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
$11.95
P-H1434-178 Cover Plate - Hammond, Aluminum, 17" x 8", 20 Gauge
20 gauge bottom chassis plate for P-H1444-1783
Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$13.95
P-H1434-97 Cover Plate - Hammond, 20 gauge steel, 9" x 7"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$7.62
Out of Stock
P-H1444-29 Chassis Box - Hammond, Aluminum, 12" x 10" x 2"
Hammond Chassis Box, Aluminum, 12 in. x 10 in. x 2 in. Spot-welded heavy duty construction, natural finish. See P-H1434-29 for cover.
$36.35
P-H1444-17123 Chassis Box - Hammond, 17" x 12" x 3", 1444-17123
Special Order Item
Hammond natural aluminum chassis box. Measures 17" x 12" x 3".
$45.08
Note: special order items require additional lead time. See our page on special order items.
P-H1456W-2A-X Chassis Box - Hammond, 1456, 15° Aluminum/Wood, 4" x 5.5" x 2"
Colors Available:
15° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes.
Features:
  • 4" x 5.5" x 2" (1” height at front)
  • Top panels are 0.064” thick aluminum
  • Powder coated top and bottom
  • Wood sides are real walnut - each piece has a unique color & grain.
  • Solid oiled walnut sides on a black, ventilated steel base.
  • Comes with self adhesive rubber feet and required mounting hardware.
Starting at $59.95
Don't see what you're looking for? Send us your product suggestions!