Enclosures / Chassis

Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original Burns Buzzaround enclosures and is pre-drilled to match the original layout of the Buzzaround pedal. The hammered dark gray powder coat provides a close match for the original appearance but will hold up much better than the paint found on the vintage pedals.

Wah pedal enclosure, bottom, and foot-pedal shell and hardware. Enclosure shell & foot pedal are cast aluminum.

Hammond aluminum chassis box with walnut sides. Measures 12" by 8" by 3".

Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Measures 4.77" x 2.58" x 1.41". Add 0.16" to enclosure depth for lid.

The Gorva S90 is a high quality powder-coated take on the Hammond 1590BBM size enclosure with a focus on function and design. Features:

• Beveled top and rounded corners for high quality look.
• Tight fit and small gap between the enclosure and lid.
• Undercut boss allows more internal room for more flexible layout.
• Smooth, eggshell-like matte powder coating.
• Add 0.16" to enclosure depth for lid.

Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-26

Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.

Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.

Pre-drilled vintage style pedal enclosure by Mod® Electronics. The shape of this folded steel enclosure is inspired by the original MK1 Tone Bender enclosures and is pre-drilled to match the original layout of the MK1 pedal. The layout is intended for two pots, two jacks, and a footswitch so many fuzz varieties can be built in this enclosure. The MK1 fuzz enclosure features a removable bottom door for easy access to the battery. All required screws and rubber feet are included.

Marshall™ style JTM45 chassis w/ front and back plates

• Brushed aluminum chassis, .07" thick.
• Gold “plexi” style front and back plates
• 8-Pin (Octal) socket holes: 3
• 9-Pin (miniature) socket holes: 3
• Capacitor mounting holes:1
• Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:

• Power transformer mounting centers: 3-7/16” x 2-3/4”
• Output transformer mounting centers: 2-1/2” x 2-3/8”
• Choke mounting centers: (#1) 2-7/8” (#2) 3-3/16”
• Can cap mounting centers : 2”
• Octal (8-pin) tube sockets: 1-1/2”
• Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:

• Noval socket with shield base: P-ST9-700
• Noval socket (no shield): P-ST9-600
• Octal socket : P-ST8-600
• Output transformer: P-T1750Q
• Choke: P-C194G

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Short trapezoid shaped Hammond enclosure. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:

• Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Aluminum chassis. 0.051" thick. Dimensions shown are exterior dimensions.
Features:

• Spot-welded heavy duty construction
• Natural finish

Does not include cover. See P-H1434-30

Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).

20 gauge bottom chassis plate for P-H1444-1273 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

Marshall™ style 18 Watt Tremolo chassis w/ front and back plates

• Brushed aluminum chassis, .07" thick.
• Gold “plexi” style front and back plates
• 9-Pin (miniature) socket holes: 6
• Capacitor mounting holes:1
• Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:

• Power transformer mounting centers: 3-1/8” x 2-1/2”
• Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
• Can cap mounting centers : 2”
• Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:

• Noval socket with shield base: P-ST9-700
• Noval socket (no shield): P-ST9-600

Walnut chassis with aluminum top panel. Measures 13" x 10" x 3".

• Heavy duty construction walnut chassis.
• Top panel in natural aluminium.
• Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
• Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
• Includes four large round rubber feet (0.75" dia.

4.72" x 3.70" x 2.1" (119mm x 94mm x 56mm) diecast aluminum enclosure. Equivalent to the Hammond 1590C enclosure. This enclosure is a taller version of the 1590BB allowing for more vertical space for larger projects.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C.

Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).

Aluminum chassis. 0.051" thick. Spot-welded heavy duty construction. See P-H1434-127 for cover.

20 gauge bottom chassis plate for P-H1444-12 Features:

• Heavy duty construction
• Natural finish
• Punched with 4 holes - 3/16" diameter

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Four 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.
• Add 0.16" to enclosure depth for lid.

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x 1/2" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Add 0.16" to enclosure depth for lid.