Enclosures / Chassis
Hammond
Hammond Manufacturing offers a full range of transformers, chokes and enclosures.
Screw - Hammond, Phillips, Countersunk, 6-32 UNC
Genuine Hammand screws for use with diecast enclosures. These screws fit all Hammond diecast enclosures as well as any 6-32 UNC threaded enclosure. The thread length is 0.375”.
Colors Available:
Starting at $1.35
package of 4
Cover Plate - Hammond, Aluminum, 4.5" x 3.5"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$5.27
Cover Plate - Hammond, Aluminum, 4" x 4"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$5.62
Out of Stock
Cover Plate - Hammond, Aluminum, 7" x 5", 20 Gauge
20 gauge bottom chassis plate for P-H1444-12 Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$6.05
Cover Plate - Hammond, Aluminum, 10" x 5", 20 Gauge
20 gauge bottom chassis plate for P-H1444-1053
Features:
Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$6.05
Cover Plate - Hammond, Aluminum, 9.5" x 5"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$6.43
Out of Stock
Cover Plate - Hammond, Aluminum, 6" x 4", 20 Gauge
20 gauge bottom chassis plate for P-H1444-8 Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$6.55
Cover Plate - Hammond, Aluminum, 8" x 4", 0.04" Thick
0.04" thick bottom chassis plate for P-H1444-10 (sold seperately).
$6.90
Cover Plate - Hammond, Aluminum, 9" x 5", 0.04" Thick
0.04" thick bottom chassis plate for P-H1444-14 (sold seperately).
$7.25
Chassis Box - Hammond, 1590LB, Diecast, 1.99" x 1.99" x 1.06"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $7.45
Chassis Box - Hammond, 1590A, Diecast, 3.64" x 1.52" x 1.06"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
$7.55
Cover Plate - Hammond, 20 gauge steel, 9" x 7"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$7.62
Out of Stock
Chassis Box - Hammond, 1550P, Diecast, 3.15” x 2.17” x 0.83”
The 1550P is a 3.15 in. x 2.17 in. x 0.83. diecast enclosure made by Hammond. This enclosure is a great option for extra compact builds while still offering plenty of room for an easy construction.
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
- M3.5-0.6 threaded holes for mounting the bottom plate. Screws included.
$7.75
Chassis Box - Hammond, 1590G, Diecast, 3.94" x 1.97" x 0.83"
Add 0.16" to enclosure depth for lid.
Special Order Item
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x 1/2" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.Add 0.16" to enclosure depth for lid.
$8.73
Out of Stock
Chassis Box - Hammond, 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $8.75
Cover Plate - Hammond, Aluminum, 12" x 7", 20 Gauge
Special Order Item
20 gauge bottom chassis plate for P-H1444-1273 Features:- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$8.78
Cover Plate - Hammond, Aluminum, 8" x 6"
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$9.10
Chassis Box - Hammond, 1590B2, Diecast, 4.43" x 2.38" x 1.32"
The Hammond 1590B2 is a version of the ubiquitous 1590B with a little more vertical space. Great for any designs that require more clearance and allows for easier top-mounted jacks.
$9.40
Chassis Box - 1590G2, Diecast, 3.94" x 1.97" x 1.06"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$9.65
Cover Plate - Hammond, Aluminum, 13.5" x 5", 20 Gauge
20 gauge bottom chassis plate for P-H1444-18 Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$9.70
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Predrilled
Predrilled 1590BB enclosures. Measures 4.71" x 3.70" x 1.18" deep. These enclosures come drilled with holes for pots, footswitch and top mounted jacks.
Colors Available:
- Standard size footswitch mounting hole fits 12mm or 15/32” bushings
- ⅜” mounting holes for top mounted jacks
- Enclosed or low profile ¼” jacks recommended
- Top mounted DC jack mounting hole fits common switched jacks such as S-H750-X and P-JBLB-IN-S
- 8mm potentiometer mounting holes fit a variety of different pot sizes but 16mm pots are recommended.
Starting at $9.95
Cover Plate - Hammond, Aluminum, 10" x 6", 20 Gauge
20 gauge bottom chassis plate for P-H1444-16 Features:
- Heavy duty construction
- Natural finish
- Punched with 4 holes - 3/16" diameter
$10.50
Cover Plate - Hammond, Aluminum, 10" x 8"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$10.55
Out of Stock
Chassis Box - Hammond, 1590B3, Diecast, 4.57" x 3.03" x 1.32"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$10.80