Enclosures / Chassis
Chassis Box - 1590LB, Diecast, 1.99″ x 1.99″ x 1.22″
1.99″ x 1.99″ x 1.22″ (51mm x 51mm x 31mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590LBX enclosure. This enclosure is great for tap tempos and other utility pedals.
$3.95
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Chassis box perfectly suited for effects pedals and other DIY projects.
Colors Available:
Starting at $5.40
Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06"
4.40" x 2.38" x 1.06" D. Equivalent to Hammond P-H1590B.
Add 0.16" to enclosure depth for lid.
Colors Available:
Add 0.16" to enclosure depth for lid.
Starting at $5.95
Chassis Box - 1590A, Diecast, 3.64" x 1.52" x 1.06"
Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.
Colors Available:
Starting at $6.29
Chassis Box - 1590BS, Diecast, 4.40" x 2.38" x 1.65"
4.40" x 2.38" x 1.65" (112mm x 61m x 42mm) diecast aluminum enclosure. Equivalent to the Hammond 1590BS enclosure. This enclosure is a taller version of the 1590B allowing for top mounted jack and more overall area for larger projects.
$6.95
Chassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.58" x 1.41"
Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Measures 4.77" x 2.58" x 1.41". Add 0.16" to enclosure depth for lid.
Colors Available:
Measures 4.77" x 2.58" x 1.41". Add 0.16" to enclosure depth for lid.
Starting at $7.25
Chassis Box - Hammond, 1590LB, Diecast, 1.99" x 1.99" x 1.06"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $7.45
Chassis Box - Hammond, 1590A, Diecast, 3.64" x 1.52" x 1.06"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
$7.55
Chassis Box - Hammond, 1550P, Diecast, 3.15” x 2.17” x 0.83”
The 1550P is a 3.15 in. x 2.17 in. x 0.83. diecast enclosure made by Hammond. This enclosure is a great option for extra compact builds while still offering plenty of room for an easy construction.
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
- M3.5-0.6 threaded holes for mounting the bottom plate. Screws included.
$7.75
Chassis Box - 1590C, Diecast, 4.72" x 3.70" x 2.10"
4.72" x 3.70" x 2.1" (119mm x 94mm x 56mm) diecast aluminum enclosure. Equivalent to the Hammond 1590C enclosure. This enclosure is a taller version of the 1590BB allowing for more vertical space for larger projects.
$7.95
Chassis Box - Hammond, 1590G, Diecast, 3.94" x 1.97" x 0.83"
Add 0.16" to enclosure depth for lid.
Special Order Item
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x 1/2" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.Add 0.16" to enclosure depth for lid.
$8.73
Out of Stock
Chassis Box - Hammond, 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $8.75
Chassis Box - 1590XX, Diecast, 5.72" x 4.77" x 1.55"
5.72″ x 4.77″ x 1.55″ (145mm x 121mm x 39mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590XX enclosure. This large enclosure is great for bigger projects.
$8.80
Chassis Box - Hammond, 1590B2, Diecast, 4.43" x 2.38" x 1.32"
The Hammond 1590B2 is a version of the ubiquitous 1590B with a little more vertical space. Great for any designs that require more clearance and allows for easier top-mounted jacks.
$9.40
Chassis Box - 1590G2, Diecast, 3.94" x 1.97" x 1.06"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$9.65
Chassis Box - GØRVA Design, C65, Diecast, 4.72” x 2.56” x 1.54”
The Gorva C65 is a high quality powder-coated take on the Hammond 125B size enclosure with a focus on function and design. Features:
Colors Available:
- Slightly beveled top and rounded corners for high quality look.
- Tight fit and small gap between the enclosure and lid.
- Undercut boss allows more internal room for more flexible layout.
- Smooth, eggshell-like matte powder coating.
- Recessed bottom lid
Starting at $10.45
Chassis Box - Hammond, 1590B3, Diecast, 4.57" x 3.03" x 1.32"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$10.80
Chassis Box - Hammond, 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $10.95
Chassis Box - GØRVA Design, S90, Diecast, 4.61" x 3.54" x 1.38"
The Gorva S90 is a high quality powder-coated take on the Hammond 1590BBM size enclosure with a focus on function and design. Features:
Colors Available:
- Beveled top and rounded corners for high quality look.
- Tight fit and small gap between the enclosure and lid.
- Undercut boss allows more internal room for more flexible layout.
- Smooth, eggshell-like matte powder coating.
- Add 0.16" to enclosure depth for lid.
Starting at $10.95
Chassis Box - Hammond, 1590TRPB, Short Trapezoid, 4.41 x 3.11 x 1.54"
Short trapezoid shaped Hammond enclosure. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:
Colors Available:
- Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
Starting at $10.95
Chassis Box - 1032L, Diecast, Looper, 10" x 2.75" x 1.89"
Extra long diecast aluminum chassis commonly used for looper/loop-switching pedals. This enclosure style is often referred to as the 1032L. Mounting screws for the bottom plate are included with this chassis box. Add 0.16" to enclosure depth for lid.
$10.99
Chassis Box - Hammond, 27969PSLA, Eddystone 1590A, Diecast, 3.6” x 1.5” x 1.2”
Eddystone 27969PSLA enclosure with similar dimensions to the Hammond 1590A enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590A style builds.
- Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
- Aluminum alloy to BS1490, LM2M - supplied in natural finish.
- Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
- Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
- Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
- Countersunk lid holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$11.95
Chassis Box - Hammond, 1590BB2, Diecast, 4.7" x 3.7" x 1.5"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$11.95
Chassis Box - Hammond, 1590Y, Diecast, 3.62” x 3.62” x 1.50”
Square 3.62” x 3.62” x 1.50” Hammond 1590Y enclosure. This enclosure is a stylish option for builds offering a similar amount of space as a 1950BB enclosure.
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
$11.95