1. Home
  2. Products
  3. Enclosures / Chassis

Enclosures / Chassis

Hammond

Hammond Manufacturing offers a full range of transformers, chokes and enclosures.
products per page
P-H1456W-3A-BGE Chassis Box - Hammond, 1456, 30° Aluminum/Wood, 4" x 5.5" x 3"
30° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:
  • 4" x 5.5" x 3" (1” height at front)
  • Top panels are 0.064” thick aluminum
  • Powder coated top and bottom
  • Wood sides are real walnut - each piece has a unique color & grain.
  • Solid oiled walnut sides on a black, ventilated steel base.
  • Comes with self adhesive rubber feet and required mounting hardware.
$87.90
P-H1456W-2A-X Chassis Box - Hammond, 1456, 15° Aluminum/Wood, 4" x 5.5" x 2"
Colors Available:
15° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes.
Features:
  • 4" x 5.5" x 2" (1” height at front)
  • Top panels are 0.064” thick aluminum
  • Powder coated top and bottom
  • Wood sides are real walnut - each piece has a unique color & grain.
  • Solid oiled walnut sides on a black, ventilated steel base.
  • Comes with self adhesive rubber feet and required mounting hardware.
Starting at $59.95
P-H1590F Chassis Box - Hammond, 1590F, Diecast, 7.40" x 7.40" x 2.48"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
$33.10
P-H1456-3A-X Chassis Box - Hammond, 1456, 30° Aluminum, 4" x 5.5" x 3"
Colors Available:
30° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:
  • 4" x 5.5" x 3" (1” height at front)
  • Bottom panels are 0.081” (2 mm) thick aluminum
  • Top panels are 0.064” thick aluminum
  • Fully Powder Coated
  • Comes with self adhesive rubber feet and required mounting hardware.
$30.90
P-H1456-2A-X Chassis Box - Hammond, 1456, 15° Aluminum, 4" x 5.5" x 2"
Colors Available:
15° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:
  • 4" x 5.5" x 2" (1” height at front)
  • Bottom panels are 0.081” (2 mm) thick aluminum
  • Top panels are 0.064” thick aluminum
  • Fully Powder Coated
  • Comes with self adhesive rubber feet and required mounting hardware.
$30.90
P-H1590D-EDDY Chassis Box - Hammond, 26827PSLA, Eddystone 1590D, Diecast, 7.4” x 4.7” x 2.2”
Eddystone 26827PSLA enclosure with similar dimensions to the Hammond 1590D enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590D style builds.
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Aluminum alloy to BS1490, LM2M - supplied in natural finish.
  • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
  • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
  • Countersunk lid holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$28.95
P-H1590J-HMT-BRZ Chassis Box - Hammond, 1590J, Diecast, 5.7” x 3.7” x 1.9”, Hammered Bronze
Limited Run!
Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures finished in a hammered bronze powdercoat. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$26.95
Out of Stock
P-H1590J-HMT-CHC Chassis Box - Hammond, 1590J, Diecast, 5.7” x 3.7” x 1.9”, Hammered Charcoal
Limited Run!
Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures finished in a hammered charcoal powdercoat. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$26.95
Out of Stock
P-H1590E Chassis Box - Hammond, 1590E, Diecast, 7.40" x 4.72" x 3.07"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
$26.30
P-H1590TRPB-HMT-CHC Chassis Box - Hammond, 1590TRPB, Short Trapezoid, 4.41 x 3.11 x 1.54", Hammered Charcoal
Limited Run!
Short trapezoid shaped Hammond enclosure in a hammered charcoal powdercoat. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:
  • Hammered charcoal powdercoat
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$24.95
P-H1590TRPB-HMT-BLU Chassis Box - Hammond, 1590TRPB, Short Trapezoid, 4.41 x 3.11 x 1.54", Hammered Blue
Limited Run!
Short trapezoid shaped Hammond enclosure in a hammered blue powdercoat. This style is reminiscent of vintage fuzz pedals. Screws included. Key Features:
  • Hammered blue powdercoat
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Four 6-32 x 1/2” machine screws secure lid - into factory tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$24.95
Out of Stock
P-H1590D Chassis Box - Hammond, 1590D, Diecast, 7.39" x 4.71" x 2.05"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Six 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$23.45
P-H1590V Chassis Box - Hammond, 1590V, Diecast, 4.70" x 4.70" x 3.54"
Special Order Item
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$23.00
Out of Stock
P-H1590DD Chassis Box - Hammond, 1590DD, Diecast, 7.40" x 4.72" x 1.30"
Hammond Mfg. Diecast Aluminum Chassis Box – 7.4” x 4.7” x 1.3”. Made in Taiwan. Key Features: • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
$20.25
P-H1590X Chassis Box - Hammond, 1590X, Diecast, 5.72" x 4.77" x 2.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$17.40
P-H1590TRPCX Chassis Box - Hammond, 1590TRPC, Trapezoid, 5.95 x 3.74 x 1.38"
Colors Available:
Uniquely shaped trapezoid Hammond enclosure. Screws included.
$16.75
P-H1590XX Chassis Box - Hammond, 1590XX, Diecast, 5.72" x 4.77" x 1.39"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$14.95
P-H1590STPC Chassis Box - Hammond, 1590STPC, Octagon, 5.23 x 5.23 x 1.38"
Box, Hammond, Unpainted Aluminum Enclosure, Octagon, 5.23" x 5.23" x 1.38"
Features:
  • Rugged, diecast aluminum alloy (tough - yet easy to machine)
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x 1/2” machine screws secure lid into factory tapped holes
  • Designed to meet IP54
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting
$13.95
On Backorder
P-H1590J-X Chassis Box - Hammond, 1590J, Diecast, 5.7” x 3.7” x 1.9”
Colors Available:
Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
Starting at $13.95
P-H1590B-EDDY Chassis Box - Hammond, 27134PSLA, Eddystone 1590B, Diecast, 4.4” x 2.4” x 1.2”
Eddystone 27134PSLA enclosure with similar dimensions to the Hammond 1590B enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590B style builds.
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Aluminum alloy to BS1490, LM2M - supplied in natural finish.
  • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
  • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
  • Countersunk lid holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$12.95
P-H1590CX Chassis Box - Hammond, 1590C, Diecast, 4.71" x 3.70" x 2.07"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $12.95
P-H1590N1 Chassis Box - Hammond, 1590N1, Diecast, 4.77" x 2.58" x 1.41"
Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Aluminum enclosure with countersunk lid that machine screws into drilled and tapped holes. Lap joint construction provides protection from dust and water. Vibra finished, no sharp edges.
Add 0.16" to enclosure depth for lid.
$12.50
P-H1590BB2 Chassis Box - Hammond, 1590BB2, Diecast, 4.7" x 3.7" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
$11.95
P-H1590A-EDDY Chassis Box - Hammond, 27969PSLA, Eddystone 1590A, Diecast, 3.6” x 1.5” x 1.2”
Eddystone 27969PSLA enclosure with similar dimensions to the Hammond 1590A enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590A style builds.
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Aluminum alloy to BS1490, LM2M - supplied in natural finish.
  • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
  • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
  • Countersunk lid holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$11.95
Don't see what you're looking for? Send us your product suggestions!