Enclosures

P-HR149-020-000 Hammond - Fixed Elbow
Special Order Item
Command fitting - fixed elbow 48
  • For use with 48mm round tube and 60x40mm rectangular tube.
  • Vertical 48mm tube connection for use with Couplings only (not Base 48).
  • Die-cast Aluminum G Al Si 12.
  • Large cover opening for easier cable pull through.
  • No rotation.
  • Accessible from the top.
$197.42
Note: special order items require additional lead time. See our page on special order items.
P-HWCHAS1710BK Chassis Box - Hammond, Walnut / Black Aluminum, 17" x 10" x 3"
Special Order Item
Walnut chassis with black aluminum top panel, measures 17 inches by 10 inches by 3 inches Features:
  • Heavy duty construction walnut chassis
  • Top panel available in satin black powder paint finish.
  • Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing & dovetail construction methods. Designed to handle heavy components.
  • Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick.
$123.32
Note: special order items require additional lead time. See our page on special order items.
P-HWCHAS1310X Chassis Box - Hammond, Walnut / Aluminum, 13" x 10" x 3"
Colors Available:
Special Order Item
Walnut chassis with aluminum top panel. Measures 13" x 10" x 3".
  • Heavy duty construction walnut chassis.
  • Top panel in natural aluminium.
  • Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
  • Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
  • Includes four large round rubber feet (0.75" dia.
Starting at $94.79
Partially Out of Stock
Note: special order items require additional lead time. See our page on special order items.
P-H144133BK3CWW Chassis Box - Hammond, Steel, 17" x 10" x 4", Walnut Side Panels
Special Order Item
17" wide x 10" long x 4" tall steel chassis and bottom plate with walnut side panels Features:
  • Spot welded steel (20 gauge) - heavy duty construction chassis.
  • Steel chassis is finished in satin black powder paint
  • Side panels are made from solid walnut and routed out to fit over ends of chassis (pre-punched for easy mounting).
  • Walnut side panels attach with four machine screws & lockwashers (included) into metal inserts to avoid wood damage.
$94.18
Note: special order items require additional lead time. See our page on special order items.
P-HCH06 Chassis - Marshall Style JTM-45
Marshall™ style JTM45 chassis w/ front and back plates
  • Brushed aluminum chassis, .07" thick.
  • Gold “plexi” style front and back plates
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 3
  • Capacitor mounting holes:1
  • Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:
  • Power transformer mounting centers: 3-7/16” x 2-3/4”
  • Output transformer mounting centers: 2-1/2” x 2-3/8”
  • Choke mounting centers: (#1) 2-7/8” (#2) 3-3/16”
  • Can cap mounting centers : 2”
  • Octal (8-pin) tube sockets: 1-1/2”
  • Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:
  • Noval socket with shield base: P-ST9-700
  • Noval socket (no shield): P-ST9-600
  • Octal socket : P-ST8-600
  • Output transformer: P-T1750Q
  • Choke: P-C194G
$88.47
P-HCH07 Chassis - Marshall Style 18 Watt TMB
Marshall™ style 18 Watt TMB chassis w/ front and back plates
  • Brushed aluminum chassis, .07" thick.
  • Gold “plexi” style front and back plates
  • 9-Pin (miniature) socket holes: 6
  • Capacitor mounting holes:1
  • Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:
  • Power transformer mounting centers: 3-1/8” x 2-1/2”
  • Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
  • Can cap mounting centers : 2”
  • Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:
  • Noval socket with shield base: P-ST9-700
  • Noval socket (no shield): P-ST9-600
$88.47
P-HCH08 Chassis - Marshall Style 18 Watt Tremolo
Marshall™ style 18 Watt Tremolo chassis w/ front and back plates
  • Brushed aluminum chassis, .07" thick.
  • Gold “plexi” style front and back plates
  • 9-Pin (miniature) socket holes: 6
  • Capacitor mounting holes:1
  • Chassis Dimensions(without mounting flange): 17" x 6-½" x 2-½"

Chassis Measurements:
  • Power transformer mounting centers: 3-1/8” x 2-1/2”
  • Output transformer mounting centers: (#1) 3-3/16” (#2)3-11/16”
  • Can cap mounting centers : 2”
  • Noval (9-pin) tube sockets: 1-1/8”

Compatible Part Links:
  • Noval socket with shield base: P-ST9-700
  • Noval socket (no shield): P-ST9-600
$88.47
P-H1444-24CWW Chassis Box - Hammond, 12" x 8" x 3", Wood Sides
Special Order Item
Hammond aluminum chassis box with walnut sides. Measures 12" by 8" by 3".
$85.36
Note: special order items require additional lead time. See our page on special order items.
P-H1441-24BK3CWW Chassis Box - Hammond, Steel, 12" x 8" x 3", Walnut Side Panels
Special Order Item
12" wide x 8" long x 3" tall steel chassis and bottom plate with walnut side panels Features:
  • Spot welded steel (20 gauge) - heavy duty construction chassis.
  • Steel chassis is finished in satin black powder paint
  • Side panels are made from solid walnut and routed out to fit over ends of chassis (pre-punched for easy mounting).
  • Walnut side panels attach with four machine screws & lockwashers (included) into metal inserts to avoid wood damage.
$84.18
Note: special order items require additional lead time. See our page on special order items.
P-H1441-42X Chassis Box - Hammond, Steel, 17" x 14" x 5"
Colors Available:
Special Order Item
Cover for chassis box 17 inch wide by 14 inch deep by 5 inch tall.
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).
$75.89
Note: special order items require additional lead time. See our page on special order items.
P-HCH04 Chassis - Fender Style 5F6A Tweed Bassman
Fender® style narrow panel Tweed Bassman™(5F6A) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 3
  • Chassis Dimensions: 20'' x 4 1/8'' x 2 5/8''
$74.76
P-HCH02 Chassis - Fender Style 5E3 Tweed Deluxe
Fender® style narrow panel Tweed Deluxe™(5E3) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 3
  • 9-Pin (miniature) socket holes: 2
  • Chassis Dimensions: 14 1/2" x 4 1/8" x 2 5/8"

*NOTE*- This chassis has replaced the “ground” switch lettering found on originals with “standby”
$68.53
P-H1451-30X Chassis Cage - Hammond, Steel, 17" x 10" x 5.2"
Colors Available:
Special Order Item
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • ASA 61 grey baked enamel finish.
  • Four self-tapping screws included.

For satin black version, see P-H1451-30BK3
$67.10
Partially Out of Stock
Note: special order items require additional lead time. See our page on special order items.
P-H144112BK3CWW Chassis Box - Hammond, Steel, 7" x 5" x 2", Walnut Side Panels
Special Order Item
7" wide x 5" long x 2" tall steel chassis and bottom plate with walnut side panels Features:
  • Spot welded steel (20 gauge) - heavy duty construction chassis.
  • Steel chassis is finished in satin black powder paint
  • Side panels are made from solid walnut and routed out to fit over ends of chassis (pre-punched for easy mounting).
  • Walnut side panels attach with four machine screws & lockwashers (included) into metal inserts to avoid wood damage.
$64.96
Note: special order items require additional lead time. See our page on special order items.
P-H1441-38X Chassis Box - Hammond, Steel, 17" x 14" x 3"
Colors Available:
Special Order Item
Chassis box 17 inch wide by 14 inch deep by 3 inch tall
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-38 P-H1431-38 Steel Black Satin P-H1431-38BK3
$64.76
Partially Out of Stock
Note: special order items require additional lead time. See our page on special order items.
P-H5-525DGY2 Chassis Box - Hammond, Steel Rack with Panel
Special Order Item
Features:
  • Standard 19" rack mount
  • Formed 16 gauge steel construction
  • Panel mounts over chassis
  • Textured powder paint finish
$63.64
Note: special order items require additional lead time. See our page on special order items.
P-HCH03 Chassis - Fender Style 5F2 Tweed Princeton
Fender® style narrow panel Tweed Princeton™(5F2) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 2
  • 9-Pin (miniature) socket holes: 1
  • Chassis Dimensions: 13-3/4" x 4-1/8 x 2-1/2"
$62.30
P-H1451-29BK3 Chassis Cage - Hammond, Steel, 10" x 12" x 5.2", Black
Special Order Item
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • Satin black baked enamel finish.
  • Four self-tapping screws included.
$56.60
Note: special order items require additional lead time. See our page on special order items.
P-HCH05 Chassis - Fender Style 5F1 Tweed Champ
Fender® style Tweed Champ™(5F1) chassis.
  • Chrome plated steel, .06" thick.
  • Screened white lettering
  • 8-Pin (Octal) socket holes: 2
  • 9-Pin (miniature) socket holes: 1
  • Chassis Dimensions: 8-3/4" x 4-1/8" x 2 5/8"
$56.07
P-H1451-26X Chassis Cage - Hammond, Steel, 16" x 8" x 5.2"
Colors Available:
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • Four self-tapping screws included.
Starting at $51.32
Note: P-H1451-26BK3: Black is a special order item.
P-H1451-22X Chassis Cage - Hammond, Steel, 12" x 8" x 5.2"
Colors Available:
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • ASA 61 grey baked enamel finish.
  • Four self-tapping screws included.

For satin black version, see P-H1451-22BK3
Starting at $49.21
Note: P-H1451-22BK3: Black is a special order item.
P-H1444-17133 Chassis Box - Hammond, 17" x 13" x 3", 1444-17133
Special Order Item
Hammond natural aluminum chassis box. Measures 17" x 13" x 3".
$46.04
Note: special order items require additional lead time. See our page on special order items.
P-H1451-16 Chassis Cage - Hammond, Steel, 10" x 6" x 5.2"
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • ASA 61 grey baked enamel finish.
  • Four self-tapping screws included.
$43.13
P-HWAH Enclosure - Wah Pedal Shell and Hardware
Wah pedal enclosure, bottom, and foot-pedal shell and hardware. Enclosure shell & foot pedal are cast aluminum.
$40.00
Don't see what you're looking for? Send us your product suggestions!