Enclosures / Chassis
Hammond
Hammond Manufacturing offers a full range of transformers, chokes and enclosures.
Chassis Box - Hammond, Steel, 17" x 14" x 5"
Colors Available:
Special Order Item
Cover for chassis box 17 inch wide by 14 inch deep by 5 inch tall.- Spot welded steel - heavy duty construction chassis.
- Finished in ASA 61 smooth grey or satin black powder paint
- Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).
$87.83
Chassis Box - Hammond, 1590P1, Diecast, 6.02” x 3.27” x 1.98”
Large 6.02” x 3.27” x 1.98” Hammond 1590P1 enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
Starting at $14.85
Chassis Box - Hammond, 1590A, Diecast, 3.64" x 1.52" x 1.06"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
$7.55
Cover Plate - Hammond, Aluminum, 4" x 4"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$5.62
Out of Stock
Chassis Box - Hammond, Aluminum, 8" x 4" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
$15.75
Chassis Box - Hammond, Steel, 16" x 8" x 2"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-26
Colors Available:
$40.00
Chassis Box - Hammond, Steel, 12" x 8" x 3"
Hammond Chassis Box, Steel, 12 in. x 8 in. x 3 in.
Colors Available:
- Spot welded heavy duty construction chassis.
- 0.036"" thick.
- Dimensions shown are exterior dimensions.
- Does not include cover. See P-H1431-22 Key
Starting at $37.48
Chassis Box - Hammond, 1590STPC, Octagon, 5.23 x 5.23 x 1.38"
Box, Hammond, Unpainted Aluminum Enclosure, Octagon, 5.23" x 5.23" x 1.38"
Features:
Features:
- Rugged, diecast aluminum alloy (tough - yet easy to machine)
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x 1/2” machine screws secure lid into factory tapped holes
- Designed to meet IP54
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting
$13.95
Cover Plate - Hammond, Steel, 16" x 8", 20 Gauge
Hammond Mfg 20 gauge steel 16” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Colors Available:
Starting at $15.23
Chassis Box - Hammond, Steel, 17" x 10" x 4", Walnut Side Panels
Special Order Item
17" wide x 10" long x 4" tall steel chassis with walnut side panels Features:- Spot welded steel (20 gauge) - heavy duty construction chassis.
- Steel chassis is finished in satin black powder paint
- Side panels are made from solid walnut and routed out to fit over ends of chassis (pre-punched for easy mounting).
- Walnut side panels attach with four machine screws & lockwashers (included) into metal inserts to avoid wood damage.
$151.38
Chassis Box - Hammond, 1456, 30° Aluminum, 4" x 5.5" x 3"
30° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:
Colors Available:
- 4" x 5.5" x 3" (1” height at front)
- Bottom panels are 0.081” (2 mm) thick aluminum
- Top panels are 0.064” thick aluminum
- Fully Powder Coated
- Comes with self adhesive rubber feet and required mounting hardware.
$30.90
Chassis Box - Hammond, 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Colors Available:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $10.95
Cover Plate - Hammond, Aluminum, 4.5" x 3.5"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$5.27
Chassis Box - Hammond, Aluminum, 10" x 6" x 1"
Special Order Item
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
$16.95
Out of Stock
Chassis Box - Hammond, Steel, 6" x 4" x 2"
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-8 or P-H1431-8BK3
Colors Available:
$15.75
Chassis Cover - Hammond, Aluminum, 17" x 12"
Special Order Item
Hammond aluminum, heavy-duty chassis cover. Measures 17 in. by 12 in.
$18.72
Chassis box - Hammond, Aluminum, 8.66" x 4.06" x 1.2"
Special Order Item
Hammond aluminum chassis box with end panels and curved, riveted sides.
$22.25
Cover Plate - Hammond, Steel, 6" x 4", 20 Gauge
Hammond Mfg 20 gauge steel 6” x 4” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Colors Available:
Starting at $5.35
Chassis Box - Hammond, Aluminum, 12" x 7" x 3"
Special Order Item
Aluminum chassis. 0.051" thick. Spot-welded heavy duty construction. See P-H1434-127 for cover.
$28.10
Chassis Box - Hammond, 1456, 30° Aluminum/Wood, 4" x 5.5" x 3"
30° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:
- 4" x 5.5" x 3" (1” height at front)
- Top panels are 0.064” thick aluminum
- Powder coated top and bottom
- Wood sides are real walnut - each piece has a unique color & grain.
- Solid oiled walnut sides on a black, ventilated steel base.
- Comes with self adhesive rubber feet and required mounting hardware.
$87.90
Chassis Box - Hammond, 1590D, Diecast, 7.39" x 4.71" x 2.05"
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Six 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C.
$23.45
Cover Plate - Hammond, Aluminum, 17" x 4"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$11.70
Out of Stock
Rack-mounted Enclosure - Hammond, 1U, half-width
1 rack unit tall, extruded aluminum, 8.5" enclosure for rack-mount or desktop use.
- Strong construction, yet light weight using all aluminum components
- Suitable for desk top or rack-mountable applications.
- Knockdown design ships un-assembled for easy handling and shipping protection.
- Strong construction using:
- extruded aluminum side panels 0.125" (3.2 mm) thick
- extruded aluminum front & rear panels 0.125" (3.2mm) thick
- flat aluminum top and bottom panels 0.064" (1.6 mm) thick
- Can be used with or without rack mounting brackets (one pair included)
- Front & rear panel are interchangeable.
- Enclosure is finished in rugged, textured, black powder coat.
- Includes top, bottom, sides, self adhesive rubber feet, and all assembly hardware
- Manufactured in North America.
Starting at $131.03
Chassis Box - Hammond, Aluminum, 10" x 6" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions. Features:
Does not include cover. See P-H1434-16
- Spot-welded heavy duty construction
- Natural finish
Does not include cover. See P-H1434-16
$18.95