Enclosures

P-H1590V Chassis Box - Hammond, Unpainted Aluminum, 4.70" x 4.70" x 3.54"
Special Order Item
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$23.15
Note: special order items require additional lead time. See our page on special order items.
P-H1441-8 Chassis Box - Hammond, Steel, 6" x 4" x 2"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions.
Does not include cover. See P-H1431-8 or P-H1431-8BK3
$13.15
Note: special order items require additional lead time. See our page on special order items.
P-HWCHAS1310AL Chassis Box - Hammond, Walnut / Aluminum, 13" x 10" x 3"
Special Order Item
Walnut chassis with aluminum top panel. Measures 13" x 10" x 3".
  • Heavy duty construction walnut chassis.
  • Top panel in natural aluminium.
  • Walnut chassis is 0.778 inches thick (19.8 mm) - corners are produced with wood bracing. Designed to handle heavy components.
  • Top panel is aluminum for easy modification and thick enough to support heavy transformers without bowing - 0.08" (2 mm) thick. Fully 'framed' support from walnut chassis.
  • Includes four large round rubber feet (0.75" dia.
$94.79
Note: special order items require additional lead time. See our page on special order items.
P-HHW1310ALPL Cover Plate - Hammond, Aluminum, 11.75" x 8.75"
Special Order Item
Bottom panel for use with Hammond HWCHAS1310
Natural Aluminum.
11.75" W X 8.75" D
$11.62
Note: special order items require additional lead time. See our page on special order items.
P-H1431-20 Cover Plate - Hammond, Steel, 17" x 4", 20 Gauge
Special Order Item
20 gauge. Cover for chassis box 17 inch wide by 4 inch deep by 3 inch tall.
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3
$8.09
Note: special order items require additional lead time. See our page on special order items.
P-HHW1310BKPL Cover Plate - Hammond, Black, 11.75" x 8.75"
Special Order Item
Bottom panel for use with Hammond HWCHAS1710
Satin Black.
11.75" W X 8.75" D
$18.90
Out of Stock
P-H1455L2201 Chassis box - Hammond, Aluminum, 8.66" x 4.06" x 1.2"
Special Order Item
Hammond aluminum chassis box with end panels and curved, riveted sides.
$19.76
Note: special order items require additional lead time. See our page on special order items.
P-H1444-12103 Chassis Box - Hammond, Aluminum, 12" x 10" x 3"
Special Order Item
Aluminum chassis. 0.051" thick. Spot-welded heavy duty construction. See P-H1434-29 for cover
$29.34
Note: special order items require additional lead time. See our page on special order items.
P-H1451-30BK3 Chassis Cage - Hammond, Steel, 17" x 10" x 5.2", Black
Special Order Item
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • Satin black baked enamel finish.
  • Four self-tapping screws included.
For grey version, see P-H1451-22
$67.10
Note: special order items require additional lead time. See our page on special order items.
P-H515-0920 Chassis Box - Hammond, 15° Sloped Steel and Aluminum
Special Order Item
Measures 6" wide by 6" deep. Rear height is 2.13" and front height is 1.13" with a 15 degree slope
Features:
  • 18 gauge steel base for extra strength
  • Easy to machine - aluminum top panels are 0.064" thick aluminum.
  • Sides include vertical rows of ventilation
  • Sold pre-assembled with a two tone grey powder paint finish (base is dark satin gray, slope top is smooth light grey).
  • Comes with four self adhesive rubber feet and required hardware.
$30.92
Note: special order items require additional lead time. See our page on special order items.
P-H1431-26BK3 Cover Plate - Hammond, Steel, 16" x 8", Black, 20 Gauge
Special Order Item
Hammond Cover/Bottom Plate, Black Steel, 16 in. x 8 in. x 0.036 in. thick. Dimensions shown are exterior dimensions. Fits P-H1441-28BK3 Chassis Box. Punched with 4 holes – 3/16” diameter (Chassis requires drilling to install bottom plate).
$13.15
Note: special order items require additional lead time. See our page on special order items.
P-H1590G Chassis Box - Hammond, Unpainted Aluminum, 3.94" x 1.97" x 0.83"
Special Order Item
Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
Vibra finished for a smooth surface with no sharp edges.
Four 6-32 x ½" machine screws secure lid - into tapped holes.
Designed to meet IP54.
Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$8.77
Note: special order items require additional lead time. See our page on special order items.
P-H1451-29BK3 Chassis Cage - Hammond, Steel, 10" x 12" x 5.2", Black
Special Order Item
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • Satin black baked enamel finish.
  • Four self-tapping screws included.
$56.60
Note: special order items require additional lead time. See our page on special order items.
P-H1441-28 Chassis Box - Hammond, Steel, 16" x 8" x 3", grey
Special Order Item
Hammond Chassis Box, Grey Steel, 16 in. x 8 in. x 3 in. Spot welded heavy duty construction chassis. 0.036"" thick.
$39.46
Note: special order items require additional lead time. See our page on special order items.
P-H1411L Chassis Box - Hammond, Utility, 1411L
Special Order Item
Hammond Mfg aluminum utility enclosure 5.0” length x 4.0” width x 3.0” height.
Key Features:
  • "1411" series - 0.04" thick aluminum
  • Four 6-32 x ¼” self-tapping screws included.
  • ASA 61 grey - baked powder paint.
  • Replacement screws 1421J6 (Pkg. of six (6), 6-32 Philips head screws).
$13.36
Note: special order items require additional lead time. See our page on special order items.
P-H1411ZU Chassis Box - Hammond, Aluminum, 17" x 4" x 3", Utility, Gray
Special Order Item
Hammon utility enclosure, 0.04" thick aluminum. 17 inch length by 4 inch width by 3 inch height. Features:
  • Four self-tapping screws included
  • ASA 61 grey baked powder paint
$33.63
Note: special order items require additional lead time. See our page on special order items.
P-H1431-38 Cover Plate - Hammond, Steel, 17" x 10"
Special Order Item
Cover for chassis box 17 inch wide by 14 inch deep
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-38 P-H1431-38 Steel Black Satin P-H1431-38BK3
$20.24
Note: special order items require additional lead time. See our page on special order items.
P-H1431-38BK3 Cover Plate - Hammond, Steel, 17" x 14", Black
Special Order Item
Cover for chassis box 17 inch wide by 14 inch deep, black powder coated.
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-38 P-H1431-38 Steel Black Satin P-H1431-38BK3
$20.24
Note: special order items require additional lead time. See our page on special order items.
P-H1434-127 Cover Plate - Hammond, Aluminum, 12" x 7", 20 Gauge
Special Order Item
20 gauge bottom chassis plate for P-H1444-1273 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$7.59
Note: special order items require additional lead time. See our page on special order items.
P-H1441-10BK-3 Chassis Box - Hammond, Steel, 8" x 4" x 2", Black
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Black powder coated. Dimensions shown are exterior dimensions. Does not include cover.
$14.17
Note: special order items require additional lead time. See our page on special order items.
P-H1441-20BK3 Chassis Box - Hammond, Steel, 17" x 4" x 3", Black
Special Order Item
Chassis box 17 inch wide by 4 inch deep by 3 inch tall. Black powder coated
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-20 P-H1431-20 Steel Black Satin P-H1441-20BK3
$33.39
Note: special order items require additional lead time. See our page on special order items.
P-H1441-30 Chassis Box - Hammond, Steel, 17" x 10" x 2"
Special Order Item
17 inch wide by 10 inch deep by 2 inches tall
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-30 P-H1431-30 Steel Black Satin P-H1431-30BK3
$37.94
Note: special order items require additional lead time. See our page on special order items.
P-H1441-38 Chassis Box - Hammond, Steel, 17" x 14" x 3"
Special Order Item
Chassis box 17 inch wide by 14 inch deep by 3 inch tall
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Bottom Steel Grey P-H1441-38 P-H1431-38 Steel Black Satin P-H1431-38BK3
$64.76
Note: special order items require additional lead time. See our page on special order items.
P-H1441-42 Chassis Box - Hammond, Steel, 17" x 14" x 5"
Special Order Item
Cover for chassis box 17 inch wide by 14 inch deep by 5 inch tall.
  • Spot welded steel - heavy duty construction chassis.
  • Finished in ASA 61 smooth grey or satin black powder paint
  • Optional bottom plates are punched with 4 holes – 3/16" diameter (Chassis requires drilling to install optional bottom plates).

Type Chassis Steel Grey P-H1441-42 Steel Black Satin P-H1441-42BK3
$75.89
Note: special order items require additional lead time. See our page on special order items.
Don't see what you're looking for? Send us your product suggestions!