1. Home
  2. Products
  3. Enclosures / Chassis

Enclosures / Chassis

products per page
P-H1590BCE-HMT-S Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Silver
Limited Run!
1590B diecast enclosure finished in a hammered silver powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered silver powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid
$14.95
Out of Stock
P-H1444-862 Chassis Box - Hammond, Aluminum, 8" x 6" x 2"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$17.57
Out of Stock
P-H1441-18X Chassis Box - Hammond, Steel, 13.5" x 5" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-18 or P-H1431-18BK3
$24.20
P-H1456KE3BKBU Chassis Box - Hammond, Aluminum, 10" x 5.5" x 3" to 1.1", Sloped
Special Order Item
Hammond black top and blue case sloped aluminum console. 10 inches wide by 5.5 inch depth. Front of console is 1.1 inches high and rear is 3 inches high. Features:
  • Aluminum cases 0.081" thick aluminum
  • Pre-assembled with a textured blue case and a black top panel.
  • Comes with self adhesive rubber feet and required mounting hardware
$40.67
Out of Stock
P-H1456-3A-X Chassis Box - Hammond, 1456, 30° Aluminum, 4" x 5.5" x 3"
Colors Available:
30° sloped aluminum consoles from Hammond’s 1456 Series. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:
  • 4" x 5.5" x 3" (1” height at front)
  • Bottom panels are 0.081” (2 mm) thick aluminum
  • Top panels are 0.064” thick aluminum
  • Fully Powder Coated
  • Comes with self adhesive rubber feet and required mounting hardware.
$30.90
P-H1590XX Chassis Box - Hammond, 1590XX, Diecast, 5.72" x 4.77" x 1.39"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$14.95
P-H1431-18X Cover Plate - Hammond, Steel, 13.5" x 5", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 13.5” x 5” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8"" holes to allow installation of optional bottom plates).
$10.90
P-H1411ZU Chassis Box - Hammond, Aluminum, 17" x 4" x 3", Utility, Gray
Special Order Item
Hammond utility enclosure, 0.04" thick aluminum. 17 inch length by 4 inch width by 3 inch height. Features:
  • Four self-tapping screws included
  • ASA 61 grey baked powder paint
$35.38
Out of Stock
P-HRM-3U-19 Rack-mounted Enclosure - Hammond, 3U, full-width
3 rack unit tall, extruded aluminum, 19" enclosure for rack-mount or desktop use.
  • Strong construction, yet light weight using all aluminum components
  • Suitable for desk top or rack-mountable applications.
  • Knockdown design ships un-assembled for easy handling and shipping protection.
  • Strong construction using:
    • extruded aluminum side panels 0.125" (3.2 mm) thick
    • extruded aluminum front & rear panels 0.125" (3.2mm) thick
    • flat aluminum top and bottom panels 0.064" (1.6 mm) thick
  • Can be used with or without rack mounting brackets (one pair included)
  • Front & rear panel are interchangeable.
  • Enclosure is finished in rugged, textured, black powder coat.
  • Includes top, bottom, sides, self adhesive rubber feet, rack mount brackets, and all assembly hardware
  • Manufactured in North America.
Starting at $236.22
P-H1451-30X Chassis Cage - Hammond, Steel, 17" x 10" x 5.2"
Colors Available:
  • Dimensions shown are exterior dimensions.
  • For use with the P-H1441 and P-H1444 series chassis.
  • ASA 61 grey baked enamel finish.
  • Four self-tapping screws included.

For satin black version, see P-H1451-30BK3
$77.67
P-H1590B3 Chassis Box - Hammond, 1590B3, Diecast, 4.57" x 3.03" x 1.32"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
$10.80
P-H1590BBCE-HMT-GN Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18", Hammered Green
Limited Run!
1590BB diecast enclosure finished in a hammered green powdercoat. The 1590BB chassis box is perfectly suited for effects pedals and other DIY projects.
  • 4.71" x 3.70" x 1.18"
  • Hammered green powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590BB
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
$14.95
Out of Stock
P-H1444-972 Chassis Box - Hammond, Aluminum, 9" x 7" x 2"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$17.57
Out of Stock
P-H1441-22X Chassis Box - Hammond, Steel, 12" x 8" x 2"
Colors Available:
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover. See P-H1431-22 or P-H1431-22BK3
$38.80
P-H515-0920 Chassis Box - Hammond, 15° Sloped Steel and Aluminum
Special Order Item
Measures 6" wide by 6" deep. Rear height is 2.13" and front height is 1.13" with a 15 degree slope
Features:
  • 18 gauge steel base for extra strength
  • Easy to machine - aluminum top panels are 0.064" thick aluminum.
  • Sides include vertical rows of ventilation
  • Sold pre-assembled with a two tone grey powder paint finish (base is dark satin gray, slope top is smooth light grey).
  • Comes with four self adhesive rubber feet and required hardware.
$36.48
Note: special order items require additional lead time. See our page on special order items.
P-H1456W-3A-BGE Chassis Box - Hammond, 1456, 30° Aluminum/Wood, 4" x 5.5" x 3"
30° sloped aluminum consoles from Hammond’s 1456 Series with wood sides. These enclosures are a great choice for desktop effects and synthesizers as well as vintage style stompboxes. Features:
  • 4" x 5.5" x 3" (1” height at front)
  • Top panels are 0.064” thick aluminum
  • Powder coated top and bottom
  • Wood sides are real walnut - each piece has a unique color & grain.
  • Solid oiled walnut sides on a black, ventilated steel base.
  • Comes with self adhesive rubber feet and required mounting hardware.
$87.90
P-HHW1310XPL Cover Plate - Hammond, Aluminum, 11.75" x 8.75"
Colors Available:
Special Order Item
Bottom panel for use with Hammond HWCHAS1310 Natural Aluminum. 11.75" W X 8.75" D
Starting at $13.33
Note: special order items require additional lead time. See our page on special order items.
P-H1431-22X Cover Plate - Hammond, Steel, 12" x 8", 20 Gauge
Colors Available:
Hammond Mfg 20 gauge steel 12” x 8” cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes 1/8" holes to allow installation of optional bottom plates).
Starting at $12.95
P-H1434-127 Cover Plate - Hammond, Aluminum, 12" x 7", 20 Gauge
Special Order Item
20 gauge bottom chassis plate for P-H1444-1273 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$8.78
Note: special order items require additional lead time. See our page on special order items.
P-H1032L Chassis Box - 1032L, Diecast, Looper, 10" x 2.75" x 1.89"
Extra long diecast aluminum chassis commonly used for looper/loop-switching pedals. This enclosure style is often referred to as the 1032L. Mounting screws for the bottom plate are included with this chassis box. Add 0.16" to enclosure depth for lid.
$10.99
P-H1590BX Chassis Box - Hammond, 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $8.75
P-H1590G2 Chassis Box - 1590G2, Diecast, 3.94" x 1.97" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
$9.65
P-H1590BCE-HMT-GN Chassis Box - 1590B, Diecast, 4.40" x 2.38" x 1.06", Hammered Green
Limited Run!
1590B diecast enclosure finished in a hammered green powdercoat. 4.40" x 2.38" x 1.06" deep body. 1.22" with lid. Equivalent to Hammond P-H1590B.
  • 4.40" x 2.38" x 1.06"
  • Hammered green powdercoat
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Similar to Hammond P-H1590B
  • Add 0.16" to enclosure depth for lid.

Part of a limited run of hammered green enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-GN 1590N1/125 P-H1590N1CE-HMT-GN 1590BB P-H1590BBCE-HMT-GN YY P-H-YY-HMT-GN
$14.95
Out of Stock
P-H1444-9552 Chassis Box - Hammond, Aluminum, 9.5" x 5" x 2"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$16.40
Out of Stock
Don't see what you're looking for? Send us your product suggestions!