Enclosures / Chassis

P-H1590DDCE Chassis Box - 1590DD, Diecast, 7.40" x 4.72" x 1.30"
Diecast Aluminum Chassis Box, 7.40" x 4.72" x 1.30". Six included machine screws secure lid. Add 0.16" to enclosure depth for lid.
$13.55
P-H1590J-X Chassis Box - Hammond, 1590J, Diecast, 5.7” x 3.7” x 1.9”
Colors Available:
Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
Starting at $13.95
P-H1434-178 Cover Plate - Hammond, Aluminum, 17" x 8", 20 Gauge
20 gauge bottom chassis plate for P-H1444-1783
Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$13.95
P-H1590STPC Chassis Box - Hammond, 1590STPC, Octagon, 5.23 x 5.23 x 1.38"
Box, Hammond, Unpainted Aluminum Enclosure, Octagon, 5.23" x 5.23" x 1.38"
Features:
  • Rugged, diecast aluminum alloy (tough - yet easy to machine)
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x 1/2” machine screws secure lid into factory tapped holes
  • Designed to meet IP54
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting
$13.95
P-H1411L Chassis Box - Hammond, Utility, 1411L
Special Order Item
Hammond Mfg aluminum utility enclosure 5.0” length x 4.0” width x 3.0” height. Key Features:
  • "1411" series - 0.04" thick aluminum
  • Four 6-32 x ¼” self-tapping screws included.
  • ASA 61 grey - baked powder paint.
  • Replacement screws 1421J6 (Pkg. of six (6), 6-32 Philips head screws).
$14.05
Note: special order items require additional lead time. See our page on special order items.
P-H1444-8 Chassis Box - Hammond, Aluminum, 6" x 4" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions. Features:
  • Spot-welded heavy duty construction
  • Natural finish

Does not include cover. See P-H1434-8
$14.50
P-H1434-26 Cover Plate - Hammond, Aluminum, 16" x 8", 20 Gauge
20 gauge bottom chassis plate for P-H1444-26 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$14.55
P-H1590P1X Chassis Box - Hammond, 1590P1, Diecast, 6.02” x 3.27” x 1.98”
Colors Available:
Large 6.02” x 3.27” x 1.98” Hammond 1590P1 enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.
Starting at $14.85
P-H1590XX Chassis Box - Hammond, 1590XX, Diecast, 5.72" x 4.77" x 1.39"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$14.95
P-H1434-29 Cover Plate - Hammond, Aluminum, 12" x 10", 20 Gauge
20 gauge bottom chassis plate for P-H1444-29 Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$15.15
P-H1434-30 Cover Plate - Hammond, Aluminum, 17" x 10", 20 Gauge
20 gauge bottom chassis plate Features:
  • Heavy duty construction
  • Natural finish
  • Punched with 4 holes - 3/16" diameter
$15.30
P-H1444-12 Chassis Box - Hammond, Aluminum, 7" x 5" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
Features:
  • Spot-welded heavy duty construction
  • Natural finish
Does not include cover. See P-H1434-12
$15.70
P-H1444-10 Chassis Box - Hammond, Aluminum, 8" x 4" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
$15.75
P-H1444-9552 Chassis Box - Hammond, Aluminum, 9.5" x 5" x 2"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$16.40
Out of Stock
P-H1444-15 Chassis Box - Hammond, Aluminum, 10" x 6" x 1"
Special Order Item
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
$16.95
Out of Stock
P-HW1710ALPL Cover Plate - Hammond, Aluminum, 15.75" x 8.75"
Special Order Item
Natural aluminum panel measuring 15.75 inches by 8.75 inches
$17.13
Note: special order items require additional lead time. See our page on special order items.
P-H1590X Chassis Box - Hammond, 1590X, Diecast, 5.72" x 4.77" x 2.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
$17.40
P-H1444-972 Chassis Box - Hammond, Aluminum, 9" x 7" x 2"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$17.57
Out of Stock
P-H1444-862 Chassis Box - Hammond, Aluminum, 8" x 6" x 2"
Special Order Item
Spot welded heavy duty construction chassis. 0.036" thick. Dimensions shown are exterior dimensions. Does not include cover.
$17.57
Out of Stock
P-H1434-1712 Chassis Cover - Hammond, Aluminum, 17" x 12"
Special Order Item
Hammond aluminum, heavy-duty chassis cover. Measures 17 in. by 12 in.
$18.72
Note: special order items require additional lead time. See our page on special order items.
P-H1444-16 Chassis Box - Hammond, Aluminum, 10" x 6" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions. Features:
  • Spot-welded heavy duty construction
  • Natural finish

Does not include cover. See P-H1434-16
$18.95
P-H1590BB-EDDY Chassis Box - Hammond, 29830PSLA, Eddystone 1590BB, Diecast, 4.7” x 3.7” x 1.3”
Eddystone 29830PSLA enclosure with similar dimensions to the Hammond 1590BB enclosure. The Eddystone version has sharper corners for a distinctive appearance. This enclosure is a great option for 1590BB style builds.
  • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.
  • Aluminum alloy to BS1490, LM2M - supplied in natural finish.
  • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance.
  • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head).
  • Countersunk lid holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
$18.95
P-H1434-1713 Cover Plate - Hammond, Aluminum, 17" x 13"
Special Order Item
Hammond manufacturing 20 gauge steel cover plate. Punched with 4 holes – 3/16” diameter (Chassis now includes ⅛" holes to allow installation of optional bottom plates).
$19.32
Out of Stock
P-H1444-14 Chassis Box - Hammond, Aluminum, 9" x 5" x 2"
Aluminum chassis. 0.04" thick. Dimensions shown are exterior dimensions.
$19.35
Don't see what you're looking for? Send us your product suggestions!